大 连 理 工 大 学
图 书 馆
-------------------------------
检 索 证 明
大连理工大学 2016年发表的部分论文被国外著名检索工具收录及Web of Science(SCI-E)他引情况如下:
美国《科学引文索引》Science Citation Index Expanded (SCI-E) 收录 82 篇
1. Accession Number: WOS:000384577600054
Title: Patterning of water traps using close-loop hydrophilic micro grooves
Author(s): Yang, XL (Yang, Xiaolong); Liu, X (Liu, Xin); Song, JL (Song, Jinlong); Sun, J (Sun, Jing); Lu, XH (Lu, Xiaohong); Huang, S (Huang, Shuai); Chen, FZ (Chen, Faze); Xu, WJ (Xu, Wenji)
Source: APPLIED SURFACE SCIENCE, Volume: 389; Pages: 447-454; Published: DEC 15 2016
Document Type: Article
Addresses: [Yang, Xiaolong; Liu, Xin; Song, Jinlong; Sun, Jing; Lu, Xiaohong; Huang, Shuai; Chen, Faze; Xu, Wenji] Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116024, Peoples R China.
Reprint Address: Liu, X; Song, JL (reprint author), Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116024, Peoples R China.
E-mail Addresses: xiaolongyang3@163.com; xinliu@dlut.edu.cn; songjinlong@dlut.edu.cn; sunjing@dlut.edu.cn; lxhdlut@dlut.edu.cn; huangshuai9228@126.com; faze_chen@mail.dlut.edu.cn; wenjixu@dlut.edu.cn
ISSN: 0169-4332
Times Cited in Web of Science Core Collection: 0
2. Accession Number: WOS:000384577600117
Title: Surface modification of tube inner wall by transferred atmospheric pressure plasma
Author(s): Chen, FZ (Chen, Faze); Liu, S (Liu, Shuo); Liu, JY (Liu, Jiyu); Huang, S (Huang, Shuai); Xia, GQ (Xia, Guangqing); Song, JL (Song, Jinlong); Xu, WJ (Xu, Wenji); Sun, J (Sun, Jing); Liu, X (Liu, Xin)
Source: APPLIED SURFACE SCIENCE, Volume: 389; Pages: 967-976; Published: DEC 15 2016
Document Type: Article
Addresses: [Chen, Faze; Liu, Shuo; Liu, Jiyu; Huang, Shuai; Song, Jinlong; Xu, Wenji; Sun, Jing; Liu, Xin] Dalian Univ Technol, Minist Educ, Key Lab Precis & Non Tradit Machining Technol, Dalian 116024, Peoples R China.
[Xia, Guangqing] Dalian Univ Technol, State Key Lab Struct Anal Ind Equipment, Dalian 116024, Peoples R China.
Reprint Address: Liu, X (reprint author), Dalian Univ Technol, Minist Educ, Key Lab Precis & Non Tradit Machining Technol, Dalian 116024, Peoples R China.
E-mail Addresses: xinliu@dlut.edu.cn
ISSN: 0169-4332
Times Cited in Web of Science Core Collection: 1
3. Accession Number: WOS:000389497900065
Title: Atmospheric Pressure Plasma Functionalized Polymer Mesh: An Environmentally Friendly and Efficient Tool for Oil/Water Separation
Author(s): Chen, F (Chen, Faze); Song, JL (Song, Jinlong); Liu, Z (Liu, Ziai); Liu, JY (Liu, Jiyu); Zheng, HX (Zheng, Huanxi); Huang, S (Huang, Shuai); Sun, J (Sun, Jing); Xu, WJ (Xu, Wenji); Liu, X (Liu, Xin)
Source: ACS SUSTAINABLE CHEMISTRY & ENGINEERING, Volume: 4; Issue: 12; Pages: 6828-6837; Published: DEC 2016
Document Type: Article
Addresses: [Chen, Faze; Song, Jinlong; Liu, Ziai; Liu, Jiyu; Zheng, Huanxi; Huang, Shuai; Sun, Jing; Xu, Wenji; Liu, Xin] Dalian Univ Technol, Key Lab Precis & Nontradit Machining Technol, Minist Educ, 2 Linggong Rd, Dalian 116024, Peoples R China.
[Song, Jinlong] Tech Univ Darmstadt, Ctr Smart Interfaces, Alarich Weiss Str 10, D-64287 Darmstadt, Germany.
Reprint Address: Liu, X (reprint author), Dalian Univ Technol, Key Lab Precis & Nontradit Machining Technol, Minist Educ, 2 Linggong Rd, Dalian 116024, Peoples R China.
E-mail Addresses: xinliu@dlut.edu.cn
ISSN: 2168-0485
Times Cited in Web of Science Core Collection: 0
4. Accession Number: WOS:000388061100005
Title: Micro-macro-mechanical model and material removal mechanism of machining carbon fiber reinforced polymer
Author(s): Niu, B (Niu, Bin); Su, YL (Su, Youliang); Yang, R (Yang, Rui); Jia, ZY (Jia, Zhenyuan)
Source: INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, Volume: 111; Pages: 43-54; Published: DEC 2016
Document Type: Article
Addresses: [Niu, Bin; Su, Youliang; Yang, Rui; Jia, Zhenyuan] Dalian Univ Technol, Sch Mech Engn, Key Lab Precis & Nontradit Machining Technol, Minist Educ, Dalian 116024, Peoples R China.
Reprint Address: Yang, R (reprint author), Dalian Univ Technol, Sch Mech Engn, Key Lab Precis & Nontradit Machining Technol, Minist Educ, Dalian 116024, Peoples R China.
E-mail Addresses: niubin@dlut.edu.cn; suyl@mail.dlut.edu.cn; yangrui@dlut.edu.cn; jzyxy@dlut.edu.cn
ISSN: 0890-6955
Times Cited in Web of Science Core Collection: 0
5. Accession Number: WOS:000387737200082
Title: Significant Enhancement of the Adhesion between Metal Films and Polymer Substrates by UV-Ozone Surface Modification in Nanoscale
Author(s): Liu, JS (Liu, Junshan); He, LC (He, Licheng); Wang, L (Wang, Liang); Man, YC (Man, Yuncheng); Huang, LY (Huang, Luyi); Xu, Z (Xu, Zheng); Ge, D (Ge, Dan); Li, JM (Li, Jingmin); Liu, C (Liu, Chong); Wang, LD (Wang, Liding)
Source: ACS APPLIED MATERIALS & INTERFACES, Volume: 8; Issue: 44; Pages: 30576-30582; Published: NOV 9 2016
Document Type: Article
Addresses: [Liu, Junshan; He, Licheng; Wang, Liang; Man, Yuncheng; Xu, Zheng; Li, Jingmin; Liu, Chong; Wang, Liding] Dalian Univ Technol, Key Lab Micro Nano Technol & Syst Liaoning Prov, Dalian 116024, Liaoning, Peoples R China.
[Liu, Junshan; Liu, Chong; Wang, Liding] Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116024, Liaoning, Peoples R China.
[Huang, Luyi; Ge, Dan] Dalian Univ Technol, Sch Chem Engn, Dalian 116024, Liaoning, Peoples R China.
Liu, JS (reprint author), Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116024, Liaoning, Peoples R China.
Reprint Address: Liu, JS (reprint author), Dalian Univ Technol, Key Lab Micro Nano Technol & Syst Liaoning Prov, Dalian 116024, Liaoning, Peoples R China.
E-mail Addresses: liujs@dlut.edu.cn
ISSN: 1944-8244
Times Cited in Web of Science Core Collection: 0
6. Accession Number: WOS:000387307600071
Title: Inverse surface integrity problem in ultrasonic impact-treated AISI 304 stainless steel components
Author(s): Wang, GQ (Wang, G. Q.); Zhu, XP (Zhu, X. P.); Lei, MK (Lei, M. K.); Guo, DM (Guo, D. M.)
Source: INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Volume: 87; Issue: 5-8; Pages: 2033-2040; Published: NOV 2016
Document Type: Article
Addresses: [Wang, G. Q.; Zhu, X. P.; Lei, M. K.] Dalian Univ Technol, Sch Mat Sci & Engn, Surface Engn Lab, Dalian 116024, Peoples R China.
[Guo, D. M.] Dalian Univ Technol, Key Lab Precis & Nontradit Machining, Minist Educ, Dalian 116024, Peoples R China.
Reprint Address: Lei, MK (reprint author), Dalian Univ Technol, Sch Mat Sci & Engn, Surface Engn Lab, Dalian 116024, Peoples R China.
E-mail Addresses: mklei@dlut.edu.cn
ISSN: 0268-3768
Times Cited in Web of Science Core Collection: 0
7. Accession Number: WOS:000386039100003
Title: Precise on-machine extraction of the surface normal vector using an eddy current sensor array
Author(s): Wang, YQ (Wang, Yongqing); Lian, M (Lian, Meng); Liu, HB (Liu, Haibo); Ying, YW (Ying, Yangwei); Sheng, XJ (Sheng, Xianjun)
Source: MEASUREMENT SCIENCE AND TECHNOLOGY, Volume: 27; Issue: 11; Article Number: 115016; Published: NOV 2016
Document Type: Article
Addresses: [Wang, Yongqing; Lian, Meng; Liu, Haibo; Ying, Yangwei; Sheng, Xianjun] Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, 2 Linggong Rd, Dalian 116024, Peoples R China.
Reprint Address: Liu, HB (reprint author), Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, 2 Linggong Rd, Dalian 116024, Peoples R China.
E-mail Addresses: hbliu@dlut.edu.cn
ISSN: 0957-0233
Times Cited in Web of Science Core Collection: 0
8. Accession Number: WOS:000385324700005
Title: Novel drill structure for damage reduction in drilling CFRP composites
Author(s): Jia, ZY (Jia, Zhenyuan); Fu, R (Fu, Rao); Niu, B (Niu, Bin); Qian, BW (Qian, Baowei); Bai, Y (Bai, Yu); Wang, FJ (Wang, Fuji)
Source: INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, Volume: 110; Pages: 55-65; Published: NOV 2016
Document Type: Article
Addresses: [Jia, Zhenyuan; Fu, Rao; Niu, Bin; Qian, Baowei; Bai, Yu; Wang, Fuji] Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116024, Peoples R China.
Reprint Address: Niu, B (reprint author), Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116024, Peoples R China.
E-mail Addresses: jzyxy@dlut.edu.cn; fr200761854@mail.dlut.edu.cn; niubin@dlut.edu.cn; qbwxphero123@hotmail.com; 18842687046@163.com; wfjsll@dlut.edu.cn
ISSN: 0890-6955
Times Cited in Web of Science Core Collection: 0
9. Accession Number: WOS:000378956700002
Title: Enhancing the adhesion strength of micro electroforming layer by ultrasonic agitation method and the application
Author(s): Zhao, Z (Zhao, Zhong); Du, LQ (Du, Liqun); Tao, YS (Tao, Yousheng); Li, QF (Li, Qingfeng); Luo, L (Luo, Lei)
Source: ULTRASONICS SONOCHEMISTRY, Volume: 33; Pages: 10-17; Published: NOV 2016
Document Type: Article
Addresses: [Zhao, Zhong; Du, Liqun] Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116024, Peoples R China.
[Du, Liqun; Tao, Yousheng; Li, Qingfeng; Luo, Lei] Dalian Univ Technol, Key Lab Micro Nano Technol & Syst Liaoning Prov, Dalian 116024, Peoples R China.
Reprint Address: Du, LQ (reprint author), Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116024, Peoples R China.
E-mail Addresses: duliqun@dlut.edu.cn
ISSN: 1350-4177
Times Cited in Web of Science Core Collection: 1
10. Accession Number: WOS:000385687700001
Title: Nanoscale solely amorphous layer in silicon wafers induced by a newly developed diamond wheel
Author(s): Zhang, ZY (Zhang, Zhenyu); Guo, LC (Guo, Liangchao); Cui, JF (Cui, Junfeng); Wang, B (Wang, Bo); Kang, RK (Kang, Renke); Guo, DM (Guo, Dongming)
Source: SCIENTIFIC REPORTS, Volume: 6; Article Number: 35269; Published: OCT 13 2016
Document Type: Article
Addresses: [Zhang, Zhenyu; Guo, Liangchao; Cui, Junfeng; Wang, Bo; Kang, Renke; Guo, Dongming] Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116024, Peoples R China.
[Zhang, Zhenyu] Dalian Univ Technol, Changzhou Inst, Changzhou 213164, Peoples R China.
Zhang, ZY (reprint author), Dalian Univ Technol, Changzhou Inst, Changzhou 213164, Peoples R China.
Reprint Address: Zhang, ZY (reprint author), Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116024, Peoples R China.
E-mail Addresses: zzy@dlut.edu.cn
ISSN: 2045-2322
Times Cited in Web of Science Core Collection: 0
11. Accession Number: WOS:000388888100010
Title: The Effects of Pulse Parameters on Weld Geometry and Microstructure of a Pulsed LaserWelding Ni-Base Alloy Thin Sheet with FillerWire
Author(s): Chai, DS (Chai, Dongsheng); Wu, DD (Wu, Dongdong); Ma, GY (Ma, Guangyi); Zhou, SY (Zhou, Siyu); Jin, ZJ (Jin, Zhuji); Wu, DJ (Wu, Dongjiang)
Source: METALS, Volume: 6; Issue: 10; Article Number: 237; Published: OCT 2016
Document Type: Article
Addresses: [Chai, Dongsheng; Wu, Dongdong; Ma, Guangyi; Zhou, Siyu; Jin, Zhuji; Wu, Dongjiang] Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116024, Liaoning, Peoples R China.
Reprint Address: Ma, GY; Wu, DJ (reprint author), Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116024, Liaoning, Peoples R China.
E-mail Addresses: chai_dongsheng@mail.dlut.edu.cn; wudongdong@mail.dlut.edu.cn; gyma@dlut.edu.cn; zhousiyu@mail.dlut.edu.cn; kimsg@dlut.edu.cn; djwudut@dlut.edu.cn
ISSN: 2075-4701
Times Cited in Web of Science Core Collection: 0
12. Accession Number: WOS:000385072400040
Title: A new cutting force prediction method in ball-end milling based on material properties for difficult-to-machine materials
Author(s): Jia, ZY (Jia, Zhen-yuan); Ge, J (Ge, Jie); Ma, JW (Ma, Jian-wei); Gao, YY (Gao, Yuan-yuan); Liu, Z (Liu, Zhen)
Source: INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Volume: 86; Issue: 9-12; Pages: 2807-2822; Published: OCT 2016
Document Type: Article
Addresses: [Jia, Zhen-yuan; Ge, Jie; Ma, Jian-wei; Gao, Yuan-yuan; Liu, Zhen] Dalian Univ Technol, Sch Mech Engn, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116023, Peoples R China.
Reprint Address: Ma, JW (reprint author), Dalian Univ Technol, Sch Mech Engn, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116023, Peoples R China.
E-mail Addresses: mjw2011@dlut.edu.cn
ISSN: 0268-3768
Times Cited in Web of Science Core Collection: 0
13. Accession Number: WOS:000384423700007
Title: Investigation in the interface adhesion strength between SU-8 photoresist and metal substrate by ultrasonic treatment
Author(s): Zhang, XL (Zhang, Xiaolei); Du, LQ (Du, Liqun); Zhao, M (Zhao, Ming); Song, C (Song, Chang)
Source: MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS, Volume: 22; Issue: 10; Pages: 2425-2433; Published: OCT 2016
Document Type: Article
Addresses: [Zhang, Xiaolei; Du, Liqun; Zhao, Ming; Song, Chang] Dalian Univ Technol, Key Lab Precis & Nontradit Machining Technol, Minist Educ, Dalian 116024, Peoples R China.
[Du, Liqun] Dalian Univ Technol, Key Lab Micro Nano Technol & Syst Liaoning Prov, Dalian 116024, Peoples R China.
Du, LQ (reprint author), Dalian Univ Technol, Key Lab Micro Nano Technol & Syst Liaoning Prov, Dalian 116024, Peoples R China.
Reprint Address: Du, LQ (reprint author), Dalian Univ Technol, Key Lab Precis & Nontradit Machining Technol, Minist Educ, Dalian 116024, Peoples R China.
E-mail Addresses: duliqun@dlut.edu.cn
ISSN: 0946-7076
Times Cited in Web of Science Core Collection: 0
14. Accession Number: WOS:000384030200002
Title: A device mimicking the biomechanical characteristics of crocodile skull for lumbar fracture reduction
Author(s): Li, JM (Li, Jingmin); Guo, LH (Guo, Lihua); Li, YC (Li, Yuancheng); Lei, ZK (Lei, Zhenkun); Liu, YC (Liu, Yuanchang); Shi, WP (Shi, Weiping); Li, T (Li, Tao); Li, WK (Li, Weikang); Liu, C (Liu, Chong)
Source: BIOINSPIRATION & BIOMIMETICS, Volume: 11; Issue: 5; Article Number: 056004; Published: OCT 2016
Document Type: Article
Addresses: [Li, Jingmin; Guo, Lihua; Shi, Weiping; Li, Tao; Liu, Chong] Dalian Univ Technol, Key Lab Micro Nano Technol & Syst Liaoning Prov, Dalian 116024, Peoples R China.
[Li, Yuancheng] Dalian Med Univ, Dept Orthoped, Affiliated Hosp 1, Dalian 116024, Peoples R China.
[Lei, Zhenkun; Li, Weikang] Dalian Univ Technol, State Key Lab Struct Anal Ind Equipment, Dalian 116024, Peoples R China.
[Liu, Yuanchang] UCL, Dept Mech Engn, London NW1 2BX, England.
[Liu, Chong] Dalian Univ Technol, Key Lab Precis & Nontradit Machining Technol, Minist Educ, Dalian 116024, Peoples R China.
Reprint Address: Li, JM (reprint author), Dalian Univ Technol, Key Lab Micro Nano Technol & Syst Liaoning Prov, Dalian 116024, Peoples R China.
E-mail Addresses: jingminl@dlut.edu.cn; chongl@dlut.edu.cn
ISSN: 1748-3182
Times Cited in Web of Science Core Collection: 0
15. Accession Number: WOS:000384194200002
Title: Precision calibration method for binocular vision measurement systems based on arbitrary translations and 3D-connection information
Author(s): Yang, JH (Yang, Jinghao); Jia, ZY (Jia, Zhenyuan); Liu, W (Liu, Wei); Fan, CN (Fan, Chaonan); Xu, PT (Xu, Pengtao); Wang, FJ (Wang, Fuji); Liu, Y (Liu, Yang)
Source: MEASUREMENT SCIENCE AND TECHNOLOGY, Volume: 27; Issue: 10; Article Number: 105009; Published: OCT 2016
Document Type: Article
Addresses: [Yang, Jinghao; Jia, Zhenyuan; Liu, Wei; Fan, Chaonan; Xu, Pengtao; Wang, Fuji; Liu, Yang] Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, 2 Linggong Rd, Dalian 116024, Peoples R China.
Reprint Address: Liu, W (reprint author), Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, 2 Linggong Rd, Dalian 116024, Peoples R China.
E-mail Addresses: Lw2007@dlut.edu.cn
ISSN: 0957-0233
Times Cited in Web of Science Core Collection: 0
16. Accession Number: WOS:000382344600032
Title: Three-point-support method based on position determination of supports and wafers to eliminate gravity-induced deflection of wafers
Author(s): Liu, HJ (Liu, Haijun); Zhu, XL (Zhu, Xianglong); Kang, RK (Kang, Renke); Dong, ZG (Dong, Zhigang); Chen, XY (Chen, Xiuyi)
Source: PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, Volume: 46; Pages: 339-348; Published: OCT 2016
Document Type: Article
Addresses: [Liu, Haijun; Zhu, Xianglong; Kang, Renke; Dong, Zhigang; Chen, Xiuyi] Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining, Dalian, Peoples R China.
Reprint Address: Dong, ZG (reprint author), 2 Linggong Rd, Dalian 116024, Peoples R China.
E-mail Addresses: dongzg@dlut.edu.cn
ISSN: 0141-6359
Times Cited in Web of Science Core Collection: 0
17. Accession Number: WOS:000381838400058
Title: Fast fabrication of superhydrophobic surfaces on Ti-6A1-4V substrates by deposition of lead
Author(s): Wang, LL (Wang, Lili); Li, HY (Li, Haoyu); Song, JL (Song, Jinlong); Sun, YW (Sun, Yuwen)
Source: SURFACE & COATINGS TECHNOLOGY, Volume: 302; Pages: 507-514; Published: SEP 25 2016
Document Type: Article
Addresses: [Wang, Lili; Li, Haoyu; Song, Jinlong; Sun, Yuwen] Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116024, Peoples R China.
Reprint Address: Sun, YW (reprint author), Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116024, Peoples R China.
E-mail Addresses: ywsun@dlut.edu.cn
ISSN: 0257-8972
Times Cited in Web of Science Core Collection: 0
18. Accession Number: WOS:000383560400001
Title: Superhydrophobic porous networks for enhanced droplet shedding
Author(s): Liu, YH (Liu, Yahua); Wang, ZK (Wang, Zuankai)
Source: SCIENTIFIC REPORTS, Volume: 6; Article Number: 33817; Published: SEP 20 2016
Document Type: Article
Addresses: [Liu, Yahua; Wang, Zuankai] Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116024, Peoples R China.
[Liu, Yahua; Wang, Zuankai] City Univ Hong Kong, Dept Mech & Biomed Engn, Hong Kong, Hong Kong, Peoples R China.
[Wang, Zuankai] City Univ Hong Kong, Shenzhen Res Inst, Shenzhen 518057, Peoples R China.
Liu, YH (reprint author), City Univ Hong Kong, Dept Mech & Biomed Engn, Hong Kong, Hong Kong, Peoples R China.
Reprint Address: Liu, YH (reprint author), Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116024, Peoples R China.
E-mail Addresses: yahualiu@dlut.edu.cn
ISSN: 2045-2322
Times Cited in Web of Science Core Collection: 0
19. Accession Number: WOS:000381528900036
Title: A novel approach to fabricating a nanotwinned surface on a ternary nickel alloy
Author(s): Zhang, ZY (Zhang, Zhenyu); Wang, B (Wang, Bo); Huang, SL (Huang, Siling); Wen, B (Wen, Bin); Yang, S (Yang, Song); Zhang, B (Zhang, Bi); Lin, CT (Lin, Cheng-Te); Jiang, N (Jiang, Nan); Jin, ZM (Jin, Zhongmin); Guo, DM (Guo, Dongming)
Source: MATERIALS & DESIGN, Volume: 106; Pages: 313-320; Published: SEP 15 2016
Document Type: Article
Addresses: [Zhang, Zhenyu; Wang, Bo; Huang, Siling; Yang, Song; Zhang, Bi; Guo, Dongming] Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116024, Peoples R China.
[Zhang, Zhenyu] Dalian Univ Technol, Changzhou Inst, Changzhou 213164, Peoples R China.
[Zhang, Zhenyu] Tsinghua Univ, State Key Lab Tribol, Beijing 100084, Peoples R China.
[Wen, Bin] Yanshan Univ, State Key Lab Metastable Mat Sci & Technol, Qinhuangdao 066004, Peoples R China.
[Wang, Bo; Lin, Cheng-Te; Jiang, Nan] Chinese Acad Sci, Ningbo Inst Mat Technol & Engn, Key Lab Marine Mat & Related Technol, Ningbo 315201, Zhejiang, Peoples R China.
[Zhang, Bi] Univ Connecticut, Dept Mech Engn, Storrs, CT 06269 USA.
[Jin, Zhongmin] Univ Leeds, Sch Mech Engn, Leeds LS2 9JT, W Yorkshire, England.
Reprint Address: Zhang, ZY (reprint author), Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116024, Peoples R China.
E-mail Addresses: zzy@dlut.edu.cn
ISSN: 0264-1275
Times Cited in Web of Science Core Collection: 1
20. Accession Number: WOS:000384052800017
Title: Simultaneous and long-lasting hydrophilization of inner and outer wall surfaces of polytetrafluoroethylene tubes by transferring atmospheric pressure plasmas
Author(s): Chen, FZ (Chen, Faze); Song, JL (Song, Jinlong); Huang, S (Huang, Shuai); Xu, SH (Xu, Sihao); Xia, GQ (Xia, Guangqing); Yang, DZ (Yang, Dezheng); Xu, WJ (Xu, Wenji); Sun, J (Sun, Jing); Liu, X (Liu, Xin)
Source: JOURNAL OF PHYSICS D-APPLIED PHYSICS, Volume: 49; Issue: 36; Article Number: 365202; Published: SEP 14 2016
Document Type: Article
Addresses: [Chen, Faze; Song, Jinlong; Huang, Shuai; Xu, Wenji; Sun, Jing; Liu, Xin] Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116024, Peoples R China.
[Chen, Faze; Song, Jinlong; Huang, Shuai; Xu, Sihao; Xu, Wenji; Sun, Jing; Liu, Xin] Dalian Univ Technol, Sch Mech Engn, Dalian 116024, Peoples R China.
[Xia, Guangqing] Dalian Univ Technol, State Key Lab Struct Anal Ind Equipment, Dalian 116024, Peoples R China.
[Yang, Dezheng] Dalian Univ Technol, Key Lab Mat Modificat, Minist Educ, Dalian 116024, Peoples R China.
Liu, X (reprint author), Dalian Univ Technol, Sch Mech Engn, Dalian 116024, Peoples R China.
Reprint Address: Liu, X (reprint author), Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116024, Peoples R China.
E-mail Addresses: xinliu@dlut.edu.cn
ISSN: 0022-3727
Times Cited in Web of Science Core Collection: 1
21. Accession Number: WOS:000382951700004
Title: Modeling and numerical analysis of multi-bolt elastic interaction with bolt stress relaxation
Author(s): Wang, YQ (Wang, Y-Q); Wu, JK (Wu, J-K); Liu, HB (Liu, H-B); Xu, ST (Xu, S-T)
Source: PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, Volume: 230; Issue: 15; Pages: 2579-2587; Published: SEP 2016
Document Type: Article
Addresses: [Wang, Y-Q; Wu, J-K; Liu, H-B; Xu, S-T] Dalian Univ Technol, Key Lab Precis & Nontradit Machining Technol, Minist Educ, Dalian 116024, Peoples R China.
Reprint Address: Liu, HB (reprint author), Dalian Univ Technol, Key Lab Precis & Nontradit Machining Technol, Minist Educ, Dalian 116024, Peoples R China.
E-mail Addresses: hbliu@dlut.edu.cn
ISSN: 0954-4062
Times Cited in Web of Science Core Collection: 1
22. Accession Number: WOS:000381544400010
Title: Electrospun fibrous electrodes with tunable microstructure made of polyaniline/multi-walled carbon nanotube suspension for all-solid-state supercapacitors
Author(s): Liang, JS (Liang, Junsheng); Su, SJ (Su, Shijie); Fang, X (Fang, Xu); Wang, DZ (Wang, Dazhi); Xu, SC (Xu, Shuangchao)
Source: MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS, Volume: 211; Pages: 61-66; Published: SEP 2016
Document Type: Article
Addresses: [Liang, Junsheng; Su, Shijie; Fang, Xu; Wang, Dazhi] Dalian Univ Technol, Key Lab Micro Nano Technol & Syst Liaoning Prov, Dalian 116023, Peoples R China.
[Wang, Dazhi; Xu, Shuangchao] Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116023, Peoples R China.
Wang, DZ (reprint author), Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116023, Peoples R China.
Reprint Address: Wang, DZ (reprint author), Dalian Univ Technol, Key Lab Micro Nano Technol & Syst Liaoning Prov, Dalian 116023, Peoples R China.
E-mail Addresses: d.wang@dlut.edu.cn
ISSN: 0921-5107
Times Cited in Web of Science Core Collection: 1
23. Accession Number: WOS:000381760500001
Title: Fabrication of Long-Term Underwater Superoleophobic Al Surfaces and Application on Underwater Lossless Manipulation of Non-Polar Organic Liquids
Author(s): Song, JL (Song, Jinlong); Huang, L (Huang, Liu); Lu, Y (Lu, Yao); Liu, X (Liu, Xin); Deng, X (Deng, Xu); Yang, XL (Yang, Xiaolong); Huang, S (Huang, Shuai); Sun, J (Sun, Jing); Jin, ZJ (Jin, Zhuji); Parkin, IP (Parkin, Ivan P.)
Source: SCIENTIFIC REPORTS, Volume: 6; Article Number: 31818; Published: AUG 23 2016
Document Type: Article
Addresses: [Song, Jinlong; Huang, Liu; Liu, Xin; Yang, Xiaolong; Huang, Shuai; Sun, Jing; Jin, Zhuji] Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116024, Peoples R China.
[Lu, Yao; Parkin, Ivan P.] UCL, Dept Chem, 20 Gordon St, London WC1H 0AJ, England.
[Deng, Xu] Univ Elect Sci & Technol China, Inst Fundamental & Frontier Sci, Chengdu 610054, Peoples R China.
Reprint Address: Liu, X (reprint author), Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116024, Peoples R China.
E-mail Addresses: xinliu@dlut.edu.cn
ISSN: 2045-2322
Times Cited in Web of Science Core Collection: 0
24. Accession Number: WOS:000383828100046
Title: A suppression method of image noise for cylindrical objects based on vision sensors
Author(s): Liu, W (Liu, Wei); Wang, L (Wang, Liang); Jia, ZY (Jia, Zhenyuan); Fan, CN (Fan, Chaonan); Yang, JH (Yang, Jinghao); Xu, PT (Xu, Pengtao); Wang, LL (Wang, Lingli); Liu, Y (Liu, Yang)
Source: SENSORS AND ACTUATORS A-PHYSICAL, Volume: 247; Pages: 403-414; Published: AUG 15 2016
Document Type: Article
Addresses: [Liu, Wei; Wang, Liang; Jia, Zhenyuan; Fan, Chaonan; Yang, Jinghao; Xu, Pengtao; Wang, Lingli; Liu, Yang] Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116024, Peoples R China.
Reprint Address: Liu, W (reprint author), Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116024, Peoples R China.
E-mail Addresses: Lw2007@dlut.edu.cn; 470665251@qq.com; Jzyxy@dlut.edu.cn; fanchaonan4226@mail.dlut.edu.cn; eeycn@mail.dlut.edu.cn; 3060873618@qq.com; 21304079@mail.dlut.edu.cn; LY-SME@mail.dlut.edu.cn
ISSN: 0924-4247
Times Cited in Web of Science Core Collection: 0
25. Accession Number: WOS:000379372400003
Title: Molecular dynamics study on the thickness of damage layer in multiple grinding of monocrystalline silicon
Author(s): Guo, XG (Guo, Xiaoguang); Li, Q (Li, Qiang); Liu, T (Liu, Tao); Zhai, CH (Zhai, Changheng); Kang, RK (Kang, Renke); Jin, ZJ (Jin, Zhuji)
Source: MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING, Volume: 51; Pages: 15-19; Published: AUG 15 2016
Document Type: Article
Addresses: [Guo, Xiaoguang; Li, Qiang; Liu, Tao; Zhai, Changheng; Kang, Renke; Jin, Zhuji] Dalian Univ Technol, Key Lab Precis & Nontradit Machining, Minist Educ, Dalian 116024, Peoples R China.
Reprint Address: Li, Q (reprint author), Dalian Univ Technol, Key Lab Precis & Nontradit Machining, Minist Educ, Dalian 116024, Peoples R China.
E-mail Addresses: qiangli_0310@163.com
ISSN: 1369-8001
Times Cited in Web of Science Core Collection: 0
26. Accession Number: WOS:000378952100011
Title: Electrohydrodynamic atomization deposition and mechanical polishing of PZT thick films
Author(s): Wang, D (Wang, D.); Li, X (Li, X.); Shi, P (Shi, P.); Zhao, X (Zhao, X.); Liang, J (Liang, J.); Ren, T (Ren, T.); Dong, W (Dong, W.); Yang, R (Yang, R.); Wang, Y (Wang, Y.); Dorey, RA (Dorey, R. A.)
Source: CERAMICS INTERNATIONAL, Volume: 42; Issue: 11; Pages: 12623-12629; Published: AUG 15 2016
Document Type: Article
Addresses: [Wang, D.; Li, X.; Shi, P.; Zhao, X.; Liang, J.; Ren, T.; Yang, R.; Wang, Y.] Dalian Univ Technol, Key Lab Micro Nano Technol & Syst Liaoning Prov, Dalian 116024, Peoples R China.
[Wang, D.; Liang, J.; Ren, T.] Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116024, Peoples R China.
[Dong, W.] Dalian Univ Technol, Coll Elect Sci & Technol, Dalian 116024, Peoples R China.
[Dorey, R. A.] Univ Surrey, Guildford GU2 7XH, Surrey, England.
Reprint Address: Ren, T (reprint author), Dalian Univ Technol, Key Lab Micro Nano Technol & Syst Liaoning Prov, Dalian 116024, Peoples R China.
E-mail Addresses: ren_tq@dlut.edu.cn
ISSN: 0272-8842
Times Cited in Web of Science Core Collection: 0
27. Accession Number: WOS:000387083900097
Title: Bonding of 1D PMMA Nanofluidic Chip with Low Dimension Loss and High Bonding Strength
Author(s): Yin, ZF (Yin, Zhifu); Sun, L (Sun, Lei); Zou, HL (Zou, Helin); Xu, SB (Xu, Shenbo)
Source: JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, Volume: 16; Issue: 8; Pages: 8439-8444; Published: AUG 2016
Document Type: Article
Addresses: [Yin, Zhifu; Sun, Lei; Zou, Helin; Xu, Shenbo] Dalian Univ Technol, Key Lab Micro Nano Technol & Syst Liaoning Prov, Dalian 116024, Peoples R China.
[Zou, Helin] Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116024, Peoples R China.
Zou, HL (reprint author), Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116024, Peoples R China.
Reprint Address: Zou, HL (reprint author), Dalian Univ Technol, Key Lab Micro Nano Technol & Syst Liaoning Prov, Dalian 116024, Peoples R China.
ISSN: 1533-4880
Times Cited in Web of Science Core Collection: 0
28. Accession Number: WOS:000378991300001
Title: A load identification method for the grinding damage induced stress (GDIS) distribution in silicon wafers
Author(s): Zhou, P (Zhou, Ping); Xu, SC (Xu, Shance); Wang, ZG (Wang, Ziguang); Yan, Y (Yan, Ying); Kang, RK (Kang, Renke); Guo, DM (Guo, Dongming)
Source: INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, Volume: 107; Pages: 1-7; Published: AUG 2016
Document Type: Article
Addresses: [Zhou, Ping; Xu, Shance; Wang, Ziguang; Yan, Ying; Kang, Renke; Guo, Dongming] Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116024, Peoples R China.
Reprint Address: Zhou, P (reprint author), Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116024, Peoples R China.
ISSN: 0890-6955
Times Cited in Web of Science Core Collection: 0
29. Accession Number: WOS:000377820000003
Title: Effect of nickel particles on the interfacial adhesive strength between a Ni-P composite coating and a polymeric composite substrate
Author(s): Sun, SY (Sun, Shiyong); Yang, R (Yang, Rui); Han, J (Han, Jian); Guo, HF (Guo, Huafeng); Xing, LB (Xing, Lingbing)
Source: SURFACE & COATINGS TECHNOLOGY, Volume: 297; Pages: 19-26; Published: JUL 15 2016
Document Type: Article
Addresses: [Sun, Shiyong; Yang, Rui; Han, Jian; Guo, Huafeng; Xing, Lingbing] Dalian Univ Technol, Sch Mech Engn, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116024, Liaoning Provin, Peoples R China.
Reprint Address: Yang, R (reprint author), Dalian Univ Technol, Sch Mech Engn, 2 Linggong Rd, Dalian 116024, Liaoning Provin, Peoples R China.
E-mail Addresses: yangrui@dlut.edu.cn
ISSN: 0257-8972
Times Cited in Web of Science Core Collection: 0
30. Accession Number: WOS:000385215200004
Title: Instrument for investigating the rail of a ballastless track under longitudinal temperature force
Author(s): Wang, K (Wang, Ke); Liu, C (Liu, Chong); Wang, DZ (Wang, Dazhi); Liang, JS (Liang, Junsheng); Ren, TQ (Ren, Tongqun)
Source: ADVANCES IN MECHANICAL ENGINEERING, Volume: 8; Issue: 7; Article Number: 1687814016651816; Published: JUL 2016
Document Type: Article
Addresses: [Wang, Ke; Liu, Chong; Wang, Dazhi; Liang, Junsheng; Ren, Tongqun] Dalian Univ Technol, Key Lab Micro Nano Technol & Syst Liaoning Prov, Dalian, Peoples R China.
[Liu, Chong; Wang, Dazhi; Liang, Junsheng; Ren, Tongqun] Dalian Univ Technol, Key Lab Precis & Nontradit Machining Technol, Minist Educ, Dalian, Peoples R China.
[Wang, Dazhi] Dalian Univ Technol, Sch Mech Engn, 2 Linggong Rd, Dalian 116024, Liaoning Provin, Peoples R China.
Reprint Address: Wang, DZ (reprint author), Dalian Univ Technol, Sch Mech Engn, 2 Linggong Rd, Dalian 116024, Liaoning Provin, Peoples R China.
E-mail Addresses: d.wang@dlut.edu.cn
ISSN: 1687-8140
Times Cited in Web of Science Core Collection: 0
31. Accession Number: WOS:000380967000117
Title: A Novel Strategy to Eliminate the Influence of Water Adsorption on Quartz Surfaces on Piezoelectric Dynamometers
Author(s): Jia, ZY (Jia, Zhenyuan); Jin, L (Jin, Lei); Liu, W (Liu, Wei); Ren, ZJ (Ren, Zongjin)
Source: SENSORS, Volume: 16; Issue: 7; Article Number: 1060; Published: JUL 2016
Document Type: Article
Addresses: [Jia, Zhenyuan; Jin, Lei; Liu, Wei; Ren, Zongjin] Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116024, Peoples R China.
[Jin, Lei] Liaoning Prov Coll Commun, Shenyang 110122, Peoples R China.
Reprint Address: Liu, W (reprint author), Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116024, Peoples R China.
E-mail Addresses: jzyxy@dlut.edu.cn; dlutjl@aliyun.com; lw_2007@dlut.edu.cn; Renzongjin@dlut.edu.cn
ISSN: 1424-8220
Times Cited in Web of Science Core Collection: 0
32. Accession Number: WOS:000378939400035
Title: A water dissolution method for removing micro-waviness caused by SPDT process on KDP crystals
Author(s): Wang, X (Wang, Xu); Gao, H (Gao, Hang); Chen, YC (Chen, Yuchuan); Guo, DM (Guo, Dongming)
Source: INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Volume: 85; Issue: 5-8; Pages: 1347-1360; Published: JUL 2016
Document Type: Article
Addresses: [Wang, Xu; Gao, Hang; Chen, Yuchuan; Guo, Dongming] Dalian Univ Technol, Key Lab Precis & Nontradit Machining Technol, Minist Educ, Dalian 116024, Peoples R China.
Reprint Address: Gao, H (reprint author), Dalian Univ Technol, Key Lab Precis & Nontradit Machining Technol, Minist Educ, Dalian 116024, Peoples R China.
E-mail Addresses: hanggao4187@126.com
ISSN: 0268-3768
Times Cited in Web of Science Core Collection: 1
33. Accession Number: WOS:000378939400037
Title: Effect of roller burnishing process parameters on the surface roughness and microhardness for TA2 alloy
Author(s): Yuan, XL (Yuan, X. L.); Sun, YW (Sun, Y. W.); Gao, LS (Gao, L. S.); Jiang, SL (Jiang, S. L.)
Source: INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Volume: 85; Issue: 5-8; Pages: 1373-1383; Published: JUL 2016
Document Type: Article
Addresses: [Yuan, X. L.; Sun, Y. W.; Jiang, S. L.] Dalian Univ Technol, Key Lab Precis & Nontradit Machining Technol, Minist Educ, Dalian 116024, Peoples R China.
[Gao, L. S.] Dalian Univ Technol, Sch Mat Sci & Engn, Dalian 116024, Peoples R China.
Reprint Address: Yuan, XL (reprint author), Dalian Univ Technol, Key Lab Precis & Nontradit Machining Technol, Minist Educ, Dalian 116024, Peoples R China.
E-mail Addresses: glendream@163.com
ISSN: 0268-3768
Times Cited in Web of Science Core Collection: 0
34. Accession Number: WOS:000378875500058
Title: Diamond-cutting ferrous metals assisted by cold plasma and ultrasonic elliptical vibration
Author(s): Huang, S (Huang, S.); Liu, X (Liu, X.); Chen, FZ (Chen, F. Z.); Zheng, HX (Zheng, H. X.); Yang, XL (Yang, X. L.); Wu, LB (Wu, L. B.); Song, JL (Song, J. L.); Xu, WJ (Xu, W. J.)
Source: INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Volume: 85; Issue: 1-4; Pages: 673-681; Published: JUL 2016
Document Type: Article
Addresses: [Huang, S.; Liu, X.; Chen, F. Z.; Zheng, H. X.; Yang, X. L.; Wu, L. B.; Song, J. L.; Xu, W. J.] Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining, Dalian 116024, Liaoning, Peoples R China.
Reprint Address: Xu, WJ (reprint author), Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining, Dalian 116024, Liaoning, Peoples R China.
E-mail Addresses: wenjixu@dlut.edu.cn
ISSN: 0268-3768
Times Cited in Web of Science Core Collection: 0
35. Accession Number: WOS:000373546900006
Title: Nickel-based alloy/austenitic stainless steel dissimilar weld properties prediction on asymmetric distribution of laser energy
Author(s): Zhou, SY (Zhou, Siyu); Ma, GY (Ma, Guangyi); Chai, DS (Chai, Dongsheng); Niu, FY (Niu, Fangyong); Dong, JF (Dong, Jinfei); Wu, DJ (Wu, Dongjiang); Zou, HL (Zou, Helin)
Source: OPTICS AND LASER TECHNOLOGY, Volume: 81; Pages: 33-39; Published: JUL 2016
Document Type: Article
Addresses: [Zhou, Siyu; Ma, Guangyi; Chai, Dongsheng; Niu, Fangyong; Dong, Jinfei; Wu, Dongjiang; Zou, Helin] Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116024, Liaoning Provin, Peoples R China.
Reprint Address: Ma, GY; Wu, DJ (reprint author), Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116024, Liaoning Provin, Peoples R China.
E-mail Addresses: gyma@dlut.edu.cn; djwudut@dlut.edu.cn
ISSN: 0030-3992
Times Cited in Web of Science Core Collection: 0
36. Accession Number: WOS:000379678700007
Title: Plasma Hydrophilization of Superhydrophobic Surface and Its Aging Behavior: The Effect of Micro/nanostructured Surface
Author(s): Chen, FZ (Chen, Faze); Xu, WJ (Xu, Wenji); Huang, S (Huang, Shuai); Liu, JY (Liu, Jiyu); Song, JL (Song, Jinlong); Liu, X (Liu, Xin)
Source: SURFACE AND INTERFACE ANALYSIS, Volume: 48; Issue: 6; Pages: 368-372; Published: JUN 2016
Document Type: Article
Addresses: [Chen, Faze; Xu, Wenji; Huang, Shuai; Liu, Jiyu; Song, Jinlong; Liu, Xin] Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116024, Peoples R China.
Reprint Address: Liu, X (reprint author), Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116024, Peoples R China.
E-mail Addresses: xinliu@dlut.edu.cn
ISSN: 0142-2421
Times Cited in Web of Science Core Collection: 0
37. Accession Number: WOS:000378852300005
Title: Simulative technology for auxiliary fuel tank separation in a wind tunnel
Author(s): Ma, X (Ma Xin); Liu, W (Liu Wei); Chen, L (Chen Ling); Li, X (Li Xiao); Jia, ZY (Jia Zhenyuan); Shang, ZL (Shang Zhiliang)
Source: CHINESE JOURNAL OF AERONAUTICS, Volume: 29; Issue: 3; Pages: 608-616; Published: JUN 2016
Document Type: Article
Addresses: [Ma Xin; Liu Wei; Chen Ling; Li Xiao; Jia Zhenyuan; Shang Zhiliang] Dalian Univ Technol, Key Lab Precis & Nontradit Machining Technol, Minist Educ, Dalian 116024, Peoples R China.
Reprint Address: Liu, W (reprint author), Dalian Univ Technol, Key Lab Precis & Nontradit Machining Technol, Minist Educ, Dalian 116024, Peoples R China.
E-mail Addresses: lw2007@dlut.edu.cn
ISSN: 1000-9361
Times Cited in Web of Science Core Collection: 0
38. Accession Number: WOS:000377925300003
Title: Friction Enhancement between Microscopically Patterned Polydimethylsiloxane and Rabbit Small Intestinal Tract Based on Different Lubrication Mechanisms
Author(s): Zhang, HY (Zhang, Hongyu); Yan, Y (Yan, Ying); Gu, ZB (Gu, Zhibin); Wang, Y (Wang, Yi); Sun, T (Sun, Tao)
Source: ACS BIOMATERIALS SCIENCE & ENGINEERING, Volume: 2; Issue: 6; Pages: 900-907; Published: JUN 2016
Document Type: Article
Addresses: [Zhang, Hongyu; Wang, Yi; Sun, Tao] Tsinghua Univ, Dept Mech Engn, State Key Lab Tribol, 1 Tsinghuayuan, Beijing 100084, Peoples R China.
[Yan, Ying] Dalian Univ Technol, Dept Mech Engn, Minist Educ, Key Lab Precis & Nontradit Machining Technol, 2 Linggong Rd, Dalian 116024, Peoples R China.
[Gu, Zhibin] Chinese Acad Sci, Inst Elect, 19 North Fourth West Rd, Beijing 100190, Peoples R China.
Reprint Address: Zhang, HY (reprint author), Tsinghua Univ, Dept Mech Engn, State Key Lab Tribol, 1 Tsinghuayuan, Beijing 100084, Peoples R China.
E-mail Addresses: zhanghyu@tsinghua.edu.cn
ISSN: 2373-9878
Times Cited in Web of Science Core Collection: 0
39. Accession Number: WOS:000376462600001
Title: Tool path planning and machining deformation compensation in high-speed milling for difficult-to-machine material thin-walled parts with curved surface
Author(s): Gao, YY (Gao, Yuan-yuan); Ma, JW (Ma, Jian-wei); Jia, ZY (Jia, Zhen-yuan); Wang, FJ (Wang, Fu-ji); Si, LK (Si, Li-kun); Song, DN (Song, De-ning)
Source: INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Volume: 84; Issue: 9-12; Pages: 1757-1767; Published: JUN 2016
Document Type: Article
Addresses: [Gao, Yuan-yuan; Ma, Jian-wei; Jia, Zhen-yuan; Wang, Fu-ji; Si, Li-kun; Song, De-ning] Dalian Univ Technol, Sch Mech Engn, Key Lab Precis & Nontradit Machining Technol, Minist Educ, Dalian 116024, Peoples R China.
Reprint Address: Ma, JW (reprint author), Dalian Univ Technol, Sch Mech Engn, Key Lab Precis & Nontradit Machining Technol, Minist Educ, Dalian 116024, Peoples R China.
E-mail Addresses: mjw2011@dlut.edu.cn
ISSN: 0268-3768
Times Cited in Web of Science Core Collection: 1
40. Accession Number: WOS:000376462600035
Title: A new cutting force modeling method in high-speed milling of curved surface with difficult-to-machine material
Author(s): Ma, JW (Ma, Jian-wei); Jia, ZY (Jia, Zhen-yuan); Wang, FJ (Wang, Fu-ji); Gao, YY (Gao, Yuan-yuan); Liu, Z (Liu, Zhen)
Source: INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Volume: 84; Issue: 9-12; Pages: 2195-2205; Published: JUN 2016
Document Type: Article
Addresses: [Ma, Jian-wei; Jia, Zhen-yuan; Wang, Fu-ji; Gao, Yuan-yuan; Liu, Zhen] Dalian Univ Technol, Sch Mech Engn, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116023, Peoples R China.
Reprint Address: Ma, JW (reprint author), Dalian Univ Technol, Sch Mech Engn, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116023, Peoples R China.
E-mail Addresses: mjw2011@dlut.edu.cn
ISSN: 0268-3768
Times Cited in Web of Science Core Collection: 0
41. Accession Number: WOS:000372560500005
Title: Influence of porous structure on the machining performance of micro EDM
Author(s): Zou, RM (Zou, Rimao); Yu, ZY (Yu, Zuyuan); Li, W (Li, Wei); Guo, MG (Guo, Meigang); Li, JZ (Li, Jianzhong)
Source: JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, Volume: 232; Pages: 43-51; Published: JUN 2016
Document Type: Article
Addresses: [Zou, Rimao; Yu, Zuyuan; Li, Wei; Guo, Meigang; Li, Jianzhong] Dalian Univ Technol, Sch Mech Engn, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian, Peoples R China.
Reprint Address: Yu, ZY (reprint author), Dalian Univ Technol, Sch Mech Engn, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian, Peoples R China.
E-mail Addresses: zyu@dlut.edu.cn
ISSN: 0924-0136
Times Cited in Web of Science Core Collection: 0
42. Accession Number: WOS:000376524400001
Title: A novel approach of chemical mechanical polishing for cadmium zinc telluride wafers
Author(s): Zhang, ZY (Zhang, Zhenyu); Wang, B (Wang, Bo); Zhou, P (Zhou, Ping); Kang, RK (Kang, Renke); Zhang, B (Zhang, Bi); Guo, DM (Guo, Dongming)
Source: SCIENTIFIC REPORTS, Volume: 6; Article Number: 26891; Published: MAY 26 2016
Document Type: Article
Addresses: [Zhang, Zhenyu; Wang, Bo; Zhou, Ping; Kang, Renke; Zhang, Bi; Guo, Dongming] Dalian Univ Technol, Key Lab Precis & Nontradit Machining Technol, Minist Educ, Dalian 116024, Peoples R China.
[Zhang, Zhenyu] Dalian Univ Technol, Changzhou Inst, Changzhou 213164, Peoples R China.
[Zhang, Zhenyu] Yanshan Univ, State Key Lab Metastable Mat Sci & Technol, Qinhuangdao 066004, Peoples R China.
[Zhang, Bi] Univ Connecticut, Dept Mech Engn, Storrs, CT 06269 USA.
Zhang, ZY (reprint author), Dalian Univ Technol, Changzhou Inst, Changzhou 213164, Peoples R China.
Zhang, ZY (reprint author), Yanshan Univ, State Key Lab Metastable Mat Sci & Technol, Qinhuangdao 066004, Peoples R China.
Reprint Address: Zhang, ZY (reprint author), Dalian Univ Technol, Key Lab Precis & Nontradit Machining Technol, Minist Educ, Dalian 116024, Peoples R China.
E-mail Addresses: zzy@dlut.edu.cn
ISSN: 2045-2322
Times Cited in Web of Science Core Collection: 0
43. Accession Number: WOS:000372033900013
Title: Study of Milling Time and Process Control Agent on W-Mo-Cr Pre-Alloying Powders
Author(s): Shi, SJ (Shi, Shuangji); Jin, ZJ (Jin, Zhuji); Bao, Y (Bao, Yan); Jiang, GN (Jiang, Guannan)
Source: MATERIALS AND MANUFACTURING PROCESSES, Volume: 31; Issue: 7; Pages: 926-932; Published: MAY 18 2016
Document Type: Article
Addresses: [Shi, Shuangji; Jin, Zhuji; Bao, Yan; Jiang, Guannan] Dalian Univ Technol, Key Lab Precis & Nontradit Machining Technol, Minist Educ, Dalian 116024, Peoples R China.
Reprint Address: Jin, ZJ (reprint author), Dalian Univ Technol, Key Lab Precis & Nontradit Machining Technol, Minist Educ, Dalian 116024, Peoples R China.
E-mail Addresses: kimsg@dlut.edu.cn
ISSN: 1042-6914
Times Cited in Web of Science Core Collection: 1
44. Accession Number: WOS:000373096500026
Title: Stability of plasma treated superhydrophobic surfaces under different ambient conditions
Author(s): Chen, FZ (Chen, Faze); Liu, JY (Liu, Jiyu); Cui, Y (Cui, Yao); Huang, S (Huang, Shuai); Song, JL (Song, Jinlong); Sun, J (Sun, Jing); Xu, WJ (Xu, Wenji); Liu, X (Liu, Xin)
Source: JOURNAL OF COLLOID AND INTERFACE SCIENCE, Volume: 470; Pages: 221-228; Published: MAY 15 2016
Document Type: Article
Addresses: [Chen, Faze; Liu, Jiyu; Cui, Yao; Huang, Shuai; Song, Jinlong; Sun, Jing; Xu, Wenji; Liu, Xin] Dalian Univ Technol, Sch Mech Engn, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116024, Peoples R China.
Reprint Address: Liu, X (reprint author), Dalian Univ Technol, Sch Mech Engn, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116024, Peoples R China.
E-mail Addresses: xinliu@dlut.edu.cn
ISSN: 0021-9797
Times Cited in Web of Science Core Collection: 7
45. Accession Number: WOS:000385265800009
Title: A NEW DRY ETCHING METHOD WITH THE HIGH ETCHING RATE FOR PATTERNING CROSS-LINKED SU-8 THICK FILMS
Author(s): Han, JN (Han, Jingning); Yin, ZF (Yin, Zhifu); Zou, HL (Zou, Helin); Wang, WQ (Wang, Wenqiang); Feng, JB (Feng, Jianbo)
Source: JOURNAL OF ELECTRICAL ENGINEERING-ELEKTROTECHNICKY CASOPIS, Volume: 67; Issue: 3; Pages: 212-216; Published: MAY 2016
Document Type: Article
Addresses: [Han, Jingning; Yin, Zhifu; Zou, Helin; Wang, Wenqiang; Feng, Jianbo] Dalian Univ Technol, Key Lab Micro Nano Technol & Syst Liaoning Prov, Dalian 116024, Peoples R China.
[Zou, Helin] Dalian Univ Technol, Key Lab Precis & Nontradit Machining Technol, Minist Educ, Dalian 116024, Peoples R China.
Zou, HL (reprint author), Dalian Univ Technol, Key Lab Precis & Nontradit Machining Technol, Minist Educ, Dalian 116024, Peoples R China.
Reprint Address: Zou, HL (reprint author), Dalian Univ Technol, Key Lab Micro Nano Technol & Syst Liaoning Prov, Dalian 116024, Peoples R China.
E-mail Addresses: zouhl@dlut.edu.cn
ISSN: 1335-3632
Times Cited in Web of Science Core Collection: 0
46. Accession Number: WOS:000376463300078
Title: Blade surface uniformity of blisk finished by abrasive flow machining
Author(s): Fu, YZ (Fu, Youzhi); Wang, XP (Wang, Xuanping); Gao, H (Gao, Hang); Wei, HB (Wei, Haibo); Li, SC (Li, Shichong)
Source: INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Volume: 84; Issue: 5-8; Pages: 1725-1735; Published: MAY 2016
Document Type: Article
Addresses: [Fu, Youzhi; Wang, Xuanping; Gao, Hang; Wei, Haibo; Li, Shichong] Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116024, Peoples R China.
Reprint Address: Gao, H (reprint author), Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116024, Peoples R China.
E-mail Addresses: hanggao4187@126.com
ISSN: 0268-3768
Times Cited in Web of Science Core Collection: 0
47. Accession Number: WOS:000375770600002
Title: The interaction between the cutting force and induced sub-surface damage in machining of carbon fiber-reinforced plastics
Author(s): Jia, ZY (Jia, Zhenyuan); Su, YL (Su, Youliang); Niu, B (Niu, Bin); Zhang, BY (Zhang, Boyu); Wang, FJ (Wang, Fuji)
Source: JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, Volume: 35; Issue: 9; Pages: 712-726; Published: MAY 2016
Document Type: Article
Addresses: [Jia, Zhenyuan; Su, Youliang; Niu, Bin; Zhang, Boyu; Wang, Fuji] Dalian Univ Technol, Dalian 116024, Peoples R China.
Reprint Address: Wang, FJ (reprint author), Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, 2 Linggong Rd, Dalian 116024, Peoples R China.
E-mail Addresses: wfjsll@dlut.edu.cn
ISSN: 0731-6844
Times Cited in Web of Science Core Collection: 3
48. Accession Number: WOS:000374570300019
Title: Optimization of the profile of the nano-mold and the imprinting conditions by numerical simulation method
Author(s): Yin, ZF (Yin, Zhifu); Sun, L (Sun, Lei); Zou, HL (Zou, Helin); Xu, SB (Xu, Shenbo)
Source: MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS, Volume: 22; Issue: 5; Pages: 1105-1113; Published: MAY 2016
Document Type: Article; Proceedings Paper
Addresses: [Yin, Zhifu; Sun, Lei; Zou, Helin; Xu, Shenbo] Dalian Univ Technol, Key Lab Micro Nano Technol & Syst Liaoning Prov, Dalian 116024, Peoples R China.
[Zou, Helin] Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116024, Peoples R China.
Reprint Address: Zou, HL (reprint author), Dalian Univ Technol, Key Lab Micro Nano Technol & Syst Liaoning Prov, Dalian 116024, Peoples R China.
E-mail Addresses: zouhl@dlut.edu.cn
ISSN: 0946-7076
Times Cited in Web of Science Core Collection: 0
49. Accession Number: WOS:000375027100007
Title: Magnitude and Orientation Error Correction of a Superimposed Spatial Universal Rotating Magnetic Vector
Author(s): Zhang, YS (Zhang, Yongshun); Su, ZK (Su, Zhongkan); Chi, ML (Chi, Minglu); Huang, YK (Huang, Yunkui); Wang, DL (Wang, Dianlong)
Source: IEEE TRANSACTIONS ON MAGNETICS, Volume: 52; Issue: 5; Article Number: 5100309; Published: MAY 2016
Document Type: Article
Addresses: [Zhang, Yongshun; Su, Zhongkan; Chi, Minglu; Huang, Yunkui; Wang, Dianlong] Dalian Univ Technol, Minist China, Key Lab Precis & Nontradit Machining, Dalian 116024, Peoples R China.
[Zhang, Yongshun] Chongqing Univ, State Key Lab Mech Transmiss, Chongqing 400044, Peoples R China.
Zhang, YS (reprint author), Chongqing Univ, State Key Lab Mech Transmiss, Chongqing 400044, Peoples R China.
Reprint Address: Zhang, YS (reprint author), Dalian Univ Technol, Minist China, Key Lab Precis & Nontradit Machining, Dalian 116024, Peoples R China.
E-mail Addresses: zyshun@dlut.edu.cn
ISSN: 0018-9464
Times Cited in Web of Science Core Collection: 0
50. Accession Number: WOS:000371651800005
Title: Directional mechanical properties and wave propagation directionality of Kagome honeycomb structures
Author(s): Niu, B (Niu, Bin); Wang, B (Wang, Bo)
Source: EUROPEAN JOURNAL OF MECHANICS A-SOLIDS, Volume: 57; Pages: 45-58; Published: MAY-JUN 2016
Document Type: Article
Addresses: [Niu, Bin] Dalian Univ Technol, Sch Mech Engn, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116024, Peoples R China.
[Wang, Bo] Dalian Univ Technol, Dept Engn Mech, State Key Lab Struct Anal Ind Equipment, Dalian 116024, Peoples R China.
Reprint Address: Wang, B (reprint author), Dalian Univ Technol, Dept Engn Mech, State Key Lab Struct Anal Ind Equipment, Dalian 116024, Peoples R China.
E-mail Addresses: niubin@dlut.edu.cn; wangbo@dlut.edu.cn
ISSN: 0997-7538
Times Cited in Web of Science Core Collection: 2
51. Accession Number: WOS:000373862700035
Title: Controllable Water Adhesion and Anisotropic Sliding on Patterned Superhydrophobic Surface for Droplet Manipulation
Author(s): Yang, XL (Yang, Xiaolong); Liu, X (Liu, Xin); Lu, Y (Lu, Yao); Song, JL (Song, Jinlong); Huang, S (Huang, Shuai); Zhou, SN (Zhou, Shining); Jin, ZJ (Jin, Zhuji); Xu, WJ (Xu, Wenji)
Source: JOURNAL OF PHYSICAL CHEMISTRY C, Volume: 120; Issue: 13; Pages: 7233-7240; Published: APR 7 2016
Document Type: Article
Addresses: [Yang, Xiaolong; Liu, Xin; Song, Jinlong; Huang, Shuai; Zhou, Shining; Jin, Zhuji; Xu, Wenji] Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116023, Peoples R China.
[Lu, Yao] UCL, Dept Chem, 20 Gordon St, London WC1H 0AJ, England.
Reprint Address: Song, JL (reprint author), Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116023, Peoples R China.
E-mail Addresses: songjinlong@dlut.edu.cn
ISSN: 1932-7447
Times Cited in Web of Science Core Collection: 6
52. Accession Number: WOS:000373863000037
Title: Numerical study on thermal deformation characteristic of water-cooled mirror with interdigitated channels
Author(s): Chen, X (Chen, Xiao); Zhou, P (Zhou, Ping); Kang, RK (Kang, Ren-ke); Dong, ZG (Dong, Zhi-gang)
Source: APPLIED THERMAL ENGINEERING, Volume: 98; Pages: 357-364; Published: APR 5 2016
Document Type: Article
Addresses: [Chen, Xiao; Zhou, Ping; Kang, Ren-ke; Dong, Zhi-gang] Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116024, Peoples R China.
Reprint Address: Zhou, P (reprint author), Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116024, Peoples R China.
E-mail Addresses: pzhou@dlut.edu.cn
ISSN: 1359-4311
Times Cited in Web of Science Core Collection: 0
53. Accession Number: WOS:000373372500001
Title: Controlling the Adhesion of Superhydrophobic Surfaces Using Electrolyte Jet Machining Techniques
Author(s): Yang, XL (Yang, Xiaolong); Liu, X (Liu, Xin); Lu, Y (Lu, Yao); Zhou, SN (Zhou, Shining); Gao, MQ (Gao, Mingqian); Song, JL (Song, Jinlong); Xu, WJ (Xu, Wenji)
Source: SCIENTIFIC REPORTS, Volume: 6; Article Number: 23985; Published: APR 5 2016
Document Type: Article
Addresses: [Yang, Xiaolong; Liu, Xin; Zhou, Shining; Gao, Mingqian; Song, Jinlong; Xu, Wenji] Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116023, Peoples R China.
[Lu, Yao] UCL, Dept Chem, 20 Gordon St, London WC1H 0AJ, England.
Reprint Address: Song, JL (reprint author), Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116023, Peoples R China.
E-mail Addresses: songjinlong@dlut.edu.cn
ISSN: 2045-2322
Times Cited in Web of Science Core Collection: 5
54. Accession Number: WOS:000367338200012
Title: Burr Control for Removal of Metal Coating from Plastics Substrate by Micro-Milling
Author(s): Zhao, K (Zhao, Kai); Jia, ZY (Jia, Zhenyuan); Liu, W (Liu, Wei); Ma, JW (Ma, Jianwei); Ding, LC (Ding, Lichao)
Source: MATERIALS AND MANUFACTURING PROCESSES, Volume: 31; Issue: 5; Pages: 641-647; Published: APR 3 2016
Document Type: Article
Addresses: [Zhao, Kai; Jia, Zhenyuan; Liu, Wei; Ma, Jianwei; Ding, Lichao] Dalian Univ Technol, Sch Mech Engn, Key Lab Precis & Nontradit Machining Technol, Minist Educ, Dalian 116024, Peoples R China.
Reprint Address: Jia, ZY (reprint author), Dalian Univ Technol, Sch Mech Engn, Key Lab Precis & Nontradit Machining Technol, Minist Educ, Dalian 116024, Peoples R China.
E-mail Addresses: jzyxy@dlut.edu.cn
ISSN: 1042-6914
Times Cited in Web of Science Core Collection: 0
55. Accession Number: WOS:000374473300006
Title: A low-cost method of fabricating hybrid micro-nano fluidic chip by double-layer PDMS mold and UV-thermal nanoimprinting
Author(s): Sun, L (Sun, Lei); Yin, ZF (Yin, Zhifu); Qi, LP (Qi, Liping); Wu, DJ (Wu, Dongjiang); Zou, HL (Zou, Helin)
Source: MICROFLUIDICS AND NANOFLUIDICS, Volume: 20; Issue: 4; Article Number: 57; Published: APR 2016
Document Type: Article
Addresses: [Sun, Lei; Yin, Zhifu; Zou, Helin] Dalian Univ Technol, Minist Educ, Key Lab Precis & Non Tradit Machining Technol, Dalian, Peoples R China.
[Qi, Liping] Dalian Univ Technol, Dept Biomed Engn, Dalian, Peoples R China.
[Wu, Dongjiang; Zou, Helin] Dalian Univ Technol, Key Lab Micro Nano Technol & Syst Liaoning Prov, Dalian, Peoples R China.
Zou, HL (reprint author), Dalian Univ Technol, Key Lab Micro Nano Technol & Syst Liaoning Prov, Dalian, Peoples R China.
Reprint Address: Zou, HL (reprint author), Dalian Univ Technol, Minist Educ, Key Lab Precis & Non Tradit Machining Technol, Dalian, Peoples R China.
E-mail Addresses: zouhl@dlut.edu.cn
ISSN: 1613-4982
Times Cited in Web of Science Core Collection: 0
56. Accession Number: WOS:000375230900010
Title: Electrohydrodynamic jet printing and a preliminary electrochemistry test of graphene micro-scale electrodes
Author(s): Wang, DZ (Wang, Dazhi); Zha, W (Zha, Wen); Feng, L (Feng, Li); Ma, Q (Ma, Qian); Liu, XM (Liu, Xianming); Yang, N (Yang, Ning); Xu, Z (Xu, Zheng); Zhao, XJ (Zhao, Xiaojun); Liang, JS (Liang, Junsheng); Ren, TQ (Ren, Tongqun); Wang, XD (Wang, Xiaodong)
Source: JOURNAL OF MICROMECHANICS AND MICROENGINEERING, Volume: 26; Issue: 4; Article Number: 045010; Published: APR 2016
Document Type: Article
Addresses: [Wang, Dazhi; Zha, Wen; Feng, Li; Ma, Qian; Xu, Zheng; Zhao, Xiaojun; Liang, Junsheng; Ren, Tongqun; Wang, Xiaodong] Dalian Univ Technol, Key Lab Micro Nano Technol & Syst Liaoning Prov, Dalian 116024, Peoples R China.
[Wang, Dazhi; Xu, Zheng; Liang, Junsheng; Ren, Tongqun; Wang, Xiaodong] Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116024, Peoples R China.
[Liu, Xianming; Yang, Ning] Chinese Acad Sci, Dalian Inst Chem Phys, Dalian 116023, Peoples R China.
Liang, JS (reprint author), Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116024, Peoples R China.
Liu, XM (reprint author), Chinese Acad Sci, Dalian Inst Chem Phys, Dalian 116023, Peoples R China.
Reprint Address: Liang, JS (reprint author), Dalian Univ Technol, Key Lab Micro Nano Technol & Syst Liaoning Prov, Dalian 116024, Peoples R China.
E-mail Addresses: liuxianming@dicp.ac.cn; jsliang@dlut.edu.cn
ISSN: 0960-1317
Times Cited in Web of Science Core Collection: 0
57. Accession Number: WOS:000374659500006
Title: Low auto-fluorescence fabrication methods for plastic nanoslits
Author(s): Yin, ZF (Yin, Zhifu); Qi, LP (Qi, Liping); Zou, HL (Zou, Helin); Sun, L (Sun, Lei); Xu, SB (Xu, Shenbo)
Source: IET NANOBIOTECHNOLOGY, Volume: 10; Issue: 2; Pages: 75-80; Published: APR 2016
Document Type: Article
Addresses: [Yin, Zhifu; Zou, Helin; Sun, Lei; Xu, Shenbo] Dalian Univ Technol, Key Lab Micro Nano Technol & Syst Liaoning Prov, Dalian 116024, Peoples R China.
[Qi, Liping] Dalian Univ Technol, Dept Biomed Engn, Dalian 116024, Peoples R China.
[Zou, Helin] Dalian Univ Technol, Key Lab Precis & Nontradit Machining Technol, Minist Educ, Dalian 116024, Peoples R China.
Zou, HL (reprint author), Dalian Univ Technol, Key Lab Precis & Nontradit Machining Technol, Minist Educ, Dalian 116024, Peoples R China.
Reprint Address: Zou, HL (reprint author), Dalian Univ Technol, Key Lab Micro Nano Technol & Syst Liaoning Prov, Dalian 116024, Peoples R China.
E-mail Addresses: zouhl@dlut.edu.cn
ISSN: 1751-8741
Times Cited in Web of Science Core Collection: 0
58. Accession Number: WOS:000373156000041
Title: Experimental study on large size bearing ring raceways' precision polishing with abrasive flowing machine (AFM) method
Author(s): Wu, MY (Wu, M. Y.); Gao, H (Gao, H.)
Source: INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Volume: 83; Issue: 9-12; Pages: 1927-1935; Published: APR 2016
Document Type: Article
Addresses: [Wu, M. Y.; Gao, H.] Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian, Peoples R China.
Reprint Address: Gao, H (reprint author), Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian, Peoples R China.
E-mail Addresses: gaohang@dlut.edu.cn
ISSN: 0268-3768
Times Cited in Web of Science Core Collection: 1
59. Accession Number: WOS:000372757400006
Title: Fabrication of chamber for piezo inkjet printhead by SU-8 photolithography technology and bonding method
Author(s): He, JZ (He, Jingzhi); Yin, ZF (Yin, Zhifu); Li, C (Li, Chao); Wang, WQ (Wang, Wenqiang); Zou, HL (Zou, Helin)
Source: MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS, Volume: 22; Issue: 4; Pages: 721-726; Published: APR 2016
Document Type: Article
Addresses: [He, Jingzhi; Yin, Zhifu; Li, Chao; Wang, Wenqiang; Zou, Helin] Dalian Univ Technol, Key Lab Micro Nano Technol & Syst Liaoning Prov, Dalian 116024, Peoples R China.
[Zou, Helin] Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116024, Peoples R China.
Reprint Address: Zou, HL (reprint author), Dalian Univ Technol, Key Lab Micro Nano Technol & Syst Liaoning Prov, Dalian 116024, Peoples R China.
E-mail Addresses: zouhl@dlut.edu.cn
ISSN: 0946-7076
Times Cited in Web of Science Core Collection: 0
60. Accession Number: WOS:000371732300011
Title: Reducing Geometrical, Physical, and Chemical Constraints in Surface Integrity of High-Performance Stainless Steel Components by Surface Modification
Author(s): Lei, MK (Lei, M. K.); Zhu, XP (Zhu, X. P.); Guo, DM (Guo, D. M.)
Source: JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, Volume: 138; Issue: 4; Article Number: 044501; Published: APR 2016
Document Type: Article
Addresses: [Lei, M. K.; Zhu, X. P.] Dalian Univ Technol, Sch Mat Sci & Engn, Surface Engn Lab, Dalian 116024, Peoples R China.
[Guo, D. M.] Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining, Dalian 116024, Peoples R China.
Reprint Address: Lei, MK (reprint author), Dalian Univ Technol, Sch Mat Sci & Engn, Surface Engn Lab, Dalian 116024, Peoples R China.
E-mail Addresses: mklei@dlut.edu.cn; guodm@dlut.edu.cn
ISSN: 1087-1357
Times Cited in Web of Science Core Collection: 1
61. Accession Number: WOS:000371324500047
Title: Surface integrity and removal mechanism of chemical mechanical grinding of silicon wafers using a newly developed wheel
Author(s): Dong, ZG (Dong, Zhigang); Gao, S (Gao, Shang); Huang, H (Huang, Han); Kang, RK (Kang, Renke); Wang, ZG (Wang, Ziguang)
Source: INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Volume: 83; Issue: 5-8; Pages: 1231-1239; Published: MAR 2016
Document Type: Article
Addresses: [Dong, Zhigang; Gao, Shang; Kang, Renke; Wang, Ziguang] Dalian Univ Technol, Key Lab Precis & Nontradit Machining Technol, Minist Educ, Dalian 116024, Peoples R China.
[Huang, Han] Univ Queensland, Sch Mech & Min Engn, St Lucia, Qld 4072, Australia.
Reprint Address: Kang, RK (reprint author), Dalian Univ Technol, Key Lab Precis & Nontradit Machining Technol, Minist Educ, Dalian 116024, Peoples R China.
E-mail Addresses: kangrk@dlut.edu.cn
ISSN: 0268-3768
Times Cited in Web of Science Core Collection: 0
62. Accession Number: WOS:000371084800008
Title: Design and evaluation of a remote measurement system for the online monitoring of rail vibration signals
Author(s): Liu, C (Liu Chong); Wei, JH (Wei Jiahong); Zhang, ZX (Zhang Zhixin); Liang, JS (Liang Junsheng); Ren, TQ (Ren Tongqun); Xu, HQ (Xu Hongquan)
Source: PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART F-JOURNAL OF RAIL AND RAPID TRANSIT, Volume: 230; Issue: 3; Pages: 724-733; Published: MAR 2016
Document Type: Article
Addresses: [Liu Chong; Liang Junsheng] Dalian Univ Technol, Key Lab Micro Nano Technol & Syst Liaoning Prov, Dalian, Peoples R China.
[Liu Chong; Wei Jiahong; Liang Junsheng; Ren Tongqun] Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian, Peoples R China.
[Zhang Zhixin] Dalian Univ, Sch Mech Engn, Dalian 116023, Peoples R China.
[Xu Hongquan] Zhongxing Telecom Equipment Corp, Chengdu, Peoples R China.
Reprint Address: Zhang, ZX (reprint author), Dalian Univ, Sch Mech Engn, Dalian 116023, Peoples R China.
E-mail Addresses: dllzzx@dl.cn
ISSN: 0954-4097
Times Cited in Web of Science Core Collection: 0
63. Accession Number: WOS:000371037400002
Title: A novel approach of chemical mechanical polishing using environment-friendly slurry for mercury cadmium telluride semiconductors
Author(s): Zhang, ZY (Zhang, Zhenyu); Wang, B (Wang, Bo); Zhou, P (Zhou, Ping); Guo, DM (Guo, Dongming); Kang, RK (Kang, Renke); Zhang, B (Zhang, Bi)
Source: SCIENTIFIC REPORTS, Volume: 6; Article Number: 22466; Published: MAR 1 2016
Document Type: Article
Addresses: [Zhang, Zhenyu; Wang, Bo; Zhou, Ping; Guo, Dongming; Kang, Renke; Zhang, Bi] Dalian Univ Technol, Key Lab Precis & Non Tradit Machining Technol, Minist Educ, Dalian 116024, Peoples R China.
[Zhang, Zhenyu] Dalian Univ Technol, Changzhou Inst, Changzhou 213164, Peoples R China.
[Zhang, Bi] Univ Connecticut, Dept Mech Engn, Storrs, CT 06269 USA.
Reprint Address: Zhang, ZY (reprint author), Dalian Univ Technol, Key Lab Precis & Non Tradit Machining Technol, Minist Educ, Dalian 116024, Peoples R China.
E-mail Addresses: zzy@dlut.edu.cn
ISSN: 2045-2322
Times Cited in Web of Science Core Collection: 0
64. Accession Number: WOS:000366238000001
Title: Effects of ultrasonic agitation on adhesion strength of micro electroforming Ni layer on Cu substrate
Author(s): Zhao, Z (Zhao, Zhong); Du, LQ (Du, Liqun); Xu, Z (Xu, Zheng); Shao, LG (Shao, Ligeng)
Source: ULTRASONICS SONOCHEMISTRY, Volume: 29; Pages: 1-10; Published: MAR 2016
Document Type: Article
Addresses: [Zhao, Zhong; Du, Liqun] Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116024, Peoples R China.
[Du, Liqun; Xu, Zheng] Dalian Univ Technol, Key Lab Micro Nano Technol & Syst Liaoning Prov, Dalian 116024, Peoples R China.
[Shao, Ligeng] Dalian Jiaotong Univ, Sch Elect Engn & Informat, Dalian, Peoples R China.
Reprint Address: Du, LQ (reprint author), Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116024, Peoples R China.
E-mail Addresses: duliqun@dlut.edu.cn
ISSN: 1350-4177
Times Cited in Web of Science Core Collection: 2
65. Accession Number: WOS:000370211400009
Title: Underwater Spontaneous Pumpless Transportation of Nonpolar Organic Liquids on Extreme Wettability Patterns
Author(s): Huang, S (Huang, Shuai); Song, JL (Song, Jinlong); Lu, Y (Lu, Yao); Chen, FZ (Chen, Faze); Zheng, HX (Zheng, Huanxi); Yang, XL (Yang, Xiaolong); Liu, X (Liu, Xin); Sun, J (Sun, Jing); Carmalt, CJ (Carmalt, Claire J.); Parkin, IP (Parkin, Ivan P.); Xu, WJ (Xu, Wenji)
Source: ACS APPLIED MATERIALS & INTERFACES, Volume: 8; Issue: 5; Pages: 2942-2949; Published: FEB 10 2016
Document Type: Article
Addresses: [Huang, Shuai; Song, Jinlong; Chen, Faze; Zheng, Huanxi; Yang, Xiaolong; Liu, Xin; Sun, Jing; Xu, Wenji] Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116024, Peoples R China.
[Lu, Yao; Carmalt, Claire J.; Parkin, Ivan P.] UCL, Dept Chem, Mat Chem Res Ctr, 20 Gordon St, London WC1H 0AJ, England.
Reprint Address: Song, JL (reprint author), Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116024, Peoples R China.
E-mail Addresses: songjinlong@dlut.edu.cn
ISSN: 1944-8244
Times Cited in Web of Science Core Collection: 6
66. Accession Number: WOS:000370306100041
Title: An improved image acquisition method for measuring hot forgings using machine vision
Author(s): Liu, Y (Liu, Yang); Jia, ZY (Jia, Zhenyuan); Liu, W (Liu, Wei); Wang, LL (Wang, Lingli); Fan, CN (Fan, Chaonan); Xu, PT (Xu, Pengtao); Yang, JH (Yang, Jinghao); Zhao, K (Zhao, Kai)
Source: SENSORS AND ACTUATORS A-PHYSICAL, Volume: 238; Pages: 369-378; Published: FEB 1 2016
Document Type: Article
Addresses: [Liu, Yang; Jia, Zhenyuan; Liu, Wei; Wang, Lingli; Fan, Chaonan; Xu, Pengtao; Yang, Jinghao; Zhao, Kai] Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116024, Peoples R China.
Reprint Address: Liu, W (reprint author), Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116024, Peoples R China.
E-mail Addresses: LY-SME@mail.dlut.edu.cn; Jzyxy@dlut.edu.cn; Lw2007@dlut.edu.cn; 21304079@mail.dlut.edu.cn; fanchaonan4226@mail.dlut.edu.cn; 836880115@qq.com; eeycn@mail.dlut.edu.cn; kdlut@163.com
ISSN: 0924-4247
Times Cited in Web of Science Core Collection: 0
67. Accession Number: WOS:000368996900032
Title: Significance of surface integrity on high-performance manufacturing by surface modification
Author(s): Lei, MK (Lei, M. K.); Zhu, XP (Zhu, X. P.); Li, YP (Li, Y. P.); Guo, DM (Guo, D. M.)
Source: INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Volume: 82; Issue: 9-12; Pages: 1831-1842; Published: FEB 2016
Document Type: Article
Addresses: [Lei, M. K.; Zhu, X. P.; Li, Y. P.] Dalian Univ Technol, Sch Mat Sci & Engn, Surface Engn Lab, Dalian 116024, Peoples R China.
[Guo, D. M.] Dalian Univ Technol, Key Lab Precis & Nontradit Machining, Minist Educ, Dalian 116024, Peoples R China.
Reprint Address: Lei, MK (reprint author), Dalian Univ Technol, Sch Mat Sci & Engn, Surface Engn Lab, Dalian 116024, Peoples R China.
E-mail Addresses: surfeng@dlut.edu.cn
ISSN: 0268-3768
Times Cited in Web of Science Core Collection: 1
68. Accession Number: WOS:000368996900055
Title: 3D stability lobe considering the helix angle effect in thin-wall milling
Author(s): Jin, X (Jin, Xin); Sun, YW (Sun, Yuwen); Guo, Q (Guo, Qiang); Guo, DM (Guo, Dongming)
Source: INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Volume: 82; Issue: 9-12; Pages: 2123-2136; Published: FEB 2016
Document Type: Article
Addresses: [Jin, Xin; Sun, Yuwen; Guo, Dongming] Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116024, Peoples R China.
[Guo, Qiang] Henan Polytech Univ, Sch Mech & Power Engn, Jiaozuo 454150, Peoples R China.
Reprint Address: Sun, YW (reprint author), Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116024, Peoples R China.
E-mail Addresses: xiands@dlut.edu.cn
ISSN: 0268-3768
Times Cited in Web of Science Core Collection: 0
69. Accession Number: WOS:000368128500001
Title: A novel 2D silicon nano-mold fabrication technique for linear nanochannels over a 4 inch diameter substrate
Author(s): Yin, ZF (Yin, Zhifu); Qi, LP (Qi, Liping); Zou, HL (Zou, Helin); Sun, L (Sun, Lei)
Source: SCIENTIFIC REPORTS, Volume: 6; Article Number: 18921; Published: JAN 11 2016
Document Type: Article
Addresses: [Yin, Zhifu; Zou, Helin; Sun, Lei] Dalian Univ Technol, Key Lab Micro Nano Technol & Syst Liaoning Prov, Dalian 116024, Peoples R China.
[Qi, Liping] Dalian Univ Technol, Dept Biomed Engn, Dalian 116024, Peoples R China.
[Zou, Helin] Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116024, Peoples R China.
Reprint Address: Zou, HL (reprint author), Dalian Univ Technol, Key Lab Micro Nano Technol & Syst Liaoning Prov, Dalian 116024, Peoples R China.
E-mail Addresses: zouhl@dlut.edu.cn
ISSN: 2045-2322
Times Cited in Web of Science Core Collection: 1
70. Accession Number: WOS:000384238900009
Title: Power-free water pump based on a superhydrophobic surface: generation of a mushroom-like jet and anti-gravity long-distance transport
Author(s): Huang, S (Huang, Shuai); Song, JL (Song, Jinlong); Lu, Y (Lu, Yao); Lv, CJ (Lv, Cunjing); Zheng, HX (Zheng, Huanxi); Liu, X (Liu, Xin); Jin, ZJ (Jin, Zhuji); Zhao, DY (Zhao, Danyang); Carmalt, CJ (Carmalt, Claire J.); Parkin, IP (Parkin, Ivan P.)
Source: JOURNAL OF MATERIALS CHEMISTRY A, Volume: 4; Issue: 36; Pages: 13771-13777; Published: 2016
Document Type: Article
Addresses: [Huang, Shuai; Song, Jinlong; Zheng, Huanxi; Liu, Xin; Jin, Zhuji; Zhao, Danyang] Dalian Univ Technol, Key Lab Precis & Nontradit Machining Technol, Minist Educ, Dalian 116024, Peoples R China.
[Lu, Yao; Carmalt, Claire J.; Parkin, Ivan P.] UCL, Dept Chem, Mat Chem Res Ctr, 20 Gordon St, London WC1H 0AJ, England.
[Lv, Cunjing] Tech Univ Darmstadt, Ctr Smart Interfaces, Petersenstr 30, D-64287 Darmstadt, Germany.
Reprint Address: Song, JL (reprint author), Dalian Univ Technol, Key Lab Precis & Nontradit Machining Technol, Minist Educ, Dalian 116024, Peoples R China.
E-mail Addresses: songjinlong@dlut.edu.cn
ISSN: 2050-7488
Times Cited in Web of Science Core Collection: 0
71. Accession Number: WOS:000384571800023
Title: Unpowered oil absorption by a wettability sponge based oil skimmer
Author(s): Liu, ZA (Liu, Ziai); Wang, XY (Wang, Xuyue); Gao, MQ (Gao, Mingqian); Song, JL (Song, Jinlong); Huang, L (Huang, Liu); Liu, JY (Liu, Jiyu); Liu, X (Liu, Xin); Xu, W (Xu, Wei); Zhao, DY (Zhao, Danyang)
Source: RSC ADVANCES, Volume: 6; Issue: 91; Pages: 88001-88009; Published: 2016
Document Type: Article
Addresses: [Liu, Ziai; Wang, Xuyue; Gao, Mingqian; Song, Jinlong; Huang, Liu; Liu, Jiyu; Liu, Xin; Zhao, Danyang] Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116024, Peoples R China.
[Xu, Wei] China Univ Min & Technol Beijing, Sch Mech & Civil Engn, Beijing 100083, Peoples R China.
Reprint Address: Song, JL (reprint author), Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116024, Peoples R China.
E-mail Addresses: songjinlong@dlut.edu.cn
ISSN: 2046-2069
Times Cited in Web of Science Core Collection: 0
72. Accession Number: WOS:000381389100006
Title: Machining Parameter Optimization in High-Speed Milling for Inconel 718 Curved Surface
Author(s): Ma, JW (Ma, Jian-Wei); Wang, FJ (Wang, Fu-Ji); Jia, ZY (Jia, Zhen-Yuan); Gao, YY (Gao, Yuan-Yuan)
Source: MATERIALS AND MANUFACTURING PROCESSES, Volume: 31; Issue: 13; Pages: 1692-1699; Published: 2016
Document Type: Article
Addresses: [Ma, Jian-Wei; Wang, Fu-Ji; Jia, Zhen-Yuan; Gao, Yuan-Yuan] Dalian Univ Technol, Sch Mech Engn, Key Lab Precis & Nontradit Machining Technol, Minist Educ, Dalian 116024, Peoples R China.
Reprint Address: Ma, JW (reprint author), Dalian Univ Technol, Sch Mech Engn, Key Lab Precis & Nontradit Machining Technol, Minist Educ, Dalian 116024, Peoples R China.
E-mail Addresses: mjw2011@dlut.edu.cn
ISSN: 1042-6914
Times Cited in Web of Science Core Collection: 0
73. Accession Number: WOS:000382321500006
Title: Microstructure and performance optimisation of stainless steel formed by laser additive manufacturing
Author(s): Li, J (Li, J.); Deng, D (Deng, D.); Hou, X (Hou, X.); Wang, X (Wang, X.); Ma, G (Ma, G.); Wu, D (Wu, D.); Zhang, G (Zhang, G.)
Source: MATERIALS SCIENCE AND TECHNOLOGY, Volume: 32; Issue: 12; Pages: 1223-1230; Published: 2016
Document Type: Article
Addresses: [Li, J.; Deng, D.; Hou, X.; Zhang, G.] Dalian Univ Technol, Sch Mat Sci & Engn, Key Lab Mat Modificat Laser Ion & Electron Beams, Minist Educ, Dalian 116024, Peoples R China.
[Wang, X.] Dalian Univ Technol, Sch Mech Engn, Inst Sustainable Design & Mfg, Dalian 116024, Peoples R China.
[Ma, G.; Wu, D.] Dalian Univ Technol, Key Lab Precis & Nontradit Machining Technol, Minist Educ, Dalian 116024, Peoples R China.
Reprint Address: Zhang, G (reprint author), Dalian Univ Technol, Sch Mat Sci & Engn, Key Lab Mat Modificat Laser Ion & Electron Beams, Minist Educ, Dalian 116024, Peoples R China.
E-mail Addresses: gfzhang@dlut.edu.cn
ISSN: 0267-0836
Times Cited in Web of Science Core Collection: 0
74. Accession Number: WOS:000382539600021
Title: Adjusting the stability of plasma treated superhydrophobic surfaces by different modifications or microstructures
Author(s): Liu, JY (Liu, Jiyu); Chen, FZ (Chen, Faze); Zheng, HX (Zheng, Huanxi); Liu, S (Liu, Shuo); Sun, J (Sun, Jing); Huang, S (Huang, Shuai); Song, JL (Song, Jinlong); Jin, ZJ (Jin, Zhuji); Liu, X (Liu, Xin)
Source: RSC ADVANCES, Volume: 6; Issue: 83; Pages: 79437-79447; Published: 2016
Document Type: Article
Addresses: [Liu, Jiyu; Chen, Faze; Zheng, Huanxi; Liu, Shuo; Sun, Jing; Huang, Shuai; Song, Jinlong; Jin, Zhuji; Liu, Xin] Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116024, Peoples R China.
Reprint Address: Liu, X (reprint author), Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116024, Peoples R China.
E-mail Addresses: xinliu@dlut.edu.cn
ISSN: 2046-2069
Times Cited in Web of Science Core Collection: 0
75. Accession Number: WOS:000375044700007
Title: Influence of initial current density on bonding strength between Ni layer and Cu substrate in microelectroforming
Author(s): Shao, LG (Shao, Ligeng); Wang, LD (Wang, Liding); Du, LQ (Du, Liqun)
Source: JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, Volume: 30; Issue: 18; Pages: 2013-2023; Published: 2016
Document Type: Article
Addresses: [Shao, Ligeng] Dalian Jiaotong Univ, Key Lab New Energy Battery Liaoning Prov, Dalian, Peoples R China.
[Shao, Ligeng; Wang, Liding; Du, Liqun] Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian, Peoples R China.
[Wang, Liding; Du, Liqun] Dalian Univ Technol, Key Lab Micro Nano Technol & Syst Liaoning Prov, Dalian, Peoples R China.
Du, LQ (reprint author), Dalian Univ Technol, Key Lab Micro Nano Technol & Syst Liaoning Prov, Dalian, Peoples R China.
Reprint Address: Du, LQ (reprint author), Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian, Peoples R China.
E-mail Addresses: duliqun@dlut.edu.cn
ISSN: 0169-4243
Times Cited in Web of Science Core Collection: 0
76. Accession Number: WOS:000374151300008
Title: Research on the prediction model of micro-milling surface roughness of Inconel718 based on SVM
Author(s): Lu, XH (Lu, Xiaohong); Hu, XC (Hu, Xiaochen); Wang, H (Wang, Hua); Si, LK (Si, Likun); Liu, YY (Liu, Yongyun); Gao, LS (Gao, Lusi)
Source: INDUSTRIAL LUBRICATION AND TRIBOLOGY, Volume: 68; Issue: 2; Pages: 206-211; Published: 2016
Document Type: Article
Addresses: [Lu, Xiaohong; Hu, Xiaochen; Wang, Hua; Si, Likun; Liu, Yongyun] Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian, Peoples R China.
[Gao, Lusi] Dalian Univ Technol, Sch Mat Sci & Engn, Dalian, Peoples R China.
Reprint Address: Lu, XH (reprint author), Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian, Peoples R China.
E-mail Addresses: lxhdlut@dlut.edu.cn
ISSN: 0036-8792
Times Cited in Web of Science Core Collection: 1
77. Accession Number: WOS:000374151300016
Title: Tool wear appearance and failure mechanism of coated carbide tools in micro-milling of Inconel 718 super alloy
Author(s): Lu, XH (Lu, Xiaohong); Jia, ZY (Jia, Zhenyuan); Wang, H (Wang, Hua); Si, LK (Si, Likun); Liu, YY (Liu, Yongyun); Wu, WY (Wu, Wenyi)
Source: INDUSTRIAL LUBRICATION AND TRIBOLOGY, Volume: 68; Issue: 2; Pages: 267-277; Published: 2016
Document Type: Article
Addresses: [Lu, Xiaohong; Jia, Zhenyuan; Wang, Hua; Si, Likun; Liu, Yongyun; Wu, Wenyi] Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian, Peoples R China.
Reprint Address: Lu, XH (reprint author), Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian, Peoples R China.
E-mail Addresses: lxhdlut@dlut.edu.cn
ISSN: 0036-8792
Times Cited in Web of Science Core Collection: 0
78. Accession Number: WOS:000372071500012
Title: Critical Coupling Magnetic Moment of a Petal-Shaped Capsule Robot
Author(s): Zhang, YS (Zhang, Yongshun); Chi, ML (Chi, Minglu); Su, ZK (Su, Zhongkan)
Source: IEEE TRANSACTIONS ON MAGNETICS, Volume: 52; Issue: 1; Article Number: 5000109; Published: JAN 2016
Document Type: Article
Addresses: [Zhang, Yongshun; Chi, Minglu; Su, Zhongkan] Dalian Univ Technol, Minist China, Key Lab Precis & Nontradit Machining, Dalian 116024, Peoples R China.
[Zhang, Yongshun] Chongqing Univ, State Key Lab Mech Transmiss, Chongqing 400044, Peoples R China.
Zhang, YS (reprint author), Chongqing Univ, State Key Lab Mech Transmiss, Chongqing 400044, Peoples R China.
Reprint Address: Zhang, YS (reprint author), Dalian Univ Technol, Minist China, Key Lab Precis & Nontradit Machining, Dalian 116024, Peoples R China.
E-mail Addresses: zyshun@dlut.edu.cn
ISSN: 0018-9464
Times Cited in Web of Science Core Collection: 1
79. Accession Number: WOS:000370901700007
Title: Tool path optimization for five-axis flank milling with cutter runout effect using the theory of envelope surface based on CL data for general tools
Author(s): Guo, Q (Guo, Qiang); Sun, YW (Sun, Yuwen); Jiang, Y (Jiang, Yan); Yan, YY (Yan, Yanyan); Zhao, B (Zhao, Bo); Ming, PM (Ming, Pingmei)
Source: JOURNAL OF MANUFACTURING SYSTEMS, Volume: 38; Pages: 87-97; Published: JAN 2016
Document Type: Article
Addresses: [Guo, Qiang; Yan, Yanyan; Zhao, Bo; Ming, Pingmei] Henan Polytech Univ, Sch Mech & Power Engn, Jiaozuo 454150, Peoples R China.
[Sun, Yuwen] Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116024, Peoples R China.
[Jiang, Yan] Henan Polytech Univ, Sch Survey & Land Informat Engn, Jiaozuo 454000, Peoples R China.
Sun, YW (reprint author), Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116024, Peoples R China.
Reprint Address: Guo, Q (reprint author), Henan Polytech Univ, Sch Mech & Power Engn, Jiaozuo 454150, Peoples R China.
E-mail Addresses: guoqiang@hpu.edu.cn; xiands@dlut.edu.cn
ISSN: 0278-6125
Times Cited in Web of Science Core Collection: 0
80. Accession Number: WOS:000371128200002
Title: Preparation of durable underwater superoleophobic Ti6Al4V surfaces by electrochemical etching
Author(s): Wang, LL (Wang, L. L.); Sun, YW (Sun, Y. W.); Gao, YZ (Gao, Y. Z.); Guo, DM (Guo, D. M.)
Source: SURFACE ENGINEERING, Volume: 32; Issue: 2; Special Issue: SI; Pages: 85-94; Published: 2016
Document Type: Article
Addresses: [Wang, L. L.; Sun, Y. W.; Gao, Y. Z.; Guo, D. M.] Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116024, Peoples R China.
Reprint Address: Sun, YW (reprint author), Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116024, Peoples R China.
E-mail Addresses: ywsun@dlut.edu.cn
ISSN: 0267-0844
Times Cited in Web of Science Core Collection: 1
81. Accession Number: WOS:000369503300009
Title: Study on Improving Thickness Uniformity of Microfluidic Chip Mold in the Electroforming Process
Author(s): Du, LQ (Du, Liqun); Yang, T (Yang, Tong); Zhao, M (Zhao, Ming); Tao, YS (Tao, Yousheng); Luo, L (Luo, Lei); Wang, L (Wang, Lei); Liu, C (Liu, Chong)
Source: MICROMACHINES, Volume: 7; Issue: 1; Article Number: 7; Published: JAN 2016
Document Type: Article
Addresses: [Du, Liqun; Liu, Chong] Dalian Univ Technol, Key Lab Precis & Nontradit Machining Technol, Minist Educ, Dalian 116024, Peoples R China.
[Du, Liqun; Yang, Tong; Zhao, Ming; Tao, Yousheng; Luo, Lei; Liu, Chong] Dalian Univ Technol, Key Lab Micro Nano Technol & Syst Liaoning Prov, Dalian 116024, Peoples R China.
[Wang, Lei] CapitalBio Corp, Beijing 101111, Peoples R China.
Du, LQ (reprint author), Dalian Univ Technol, Key Lab Micro Nano Technol & Syst Liaoning Prov, Dalian 116024, Peoples R China.
Reprint Address: Du, LQ (reprint author), Dalian Univ Technol, Key Lab Precis & Nontradit Machining Technol, Minist Educ, Dalian 116024, Peoples R China.
E-mail Addresses: duliqun@dlut.edu.cn; ariel@mail.dlut.edu.cn; zhaoming1990@mail.dlut.edu.cn; taoyousheng@mail.dlut.edu.cn; leiluo1990@mail.dlut.edu.cn; wanglei@capitalbio.com; chongl@dlut.edu.cn
ISSN: 2072-666X
Times Cited in Web of Science Core Collection: 0
82. Accession Number: WOS:000367812600018
Title: Numerical study on the de-molding behavior of 2D PMMA nanochannles during hot embossing process
Author(s): Yin, ZF (Yin, Zhifu); Sun, L (Sun, Lei); Cheng, E (Cheng, E.); Zou, HL (Zou, Helin)
Source: MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS, Volume: 22; Issue: 1; Special Issue: SI; Pages: 129-135; Published: JAN 2016
Document Type: Article; Proceedings Paper
Addresses: [Yin, Zhifu; Sun, Lei; Cheng, E.; Zou, Helin] Dalian Univ Technol, Key Lab Micro Nano Technol & Syst Liaoning Prov, Dalian 116024, Peoples R China.
[Zou, Helin] Dalian Univ Technol, Key Lab Precis & Nontradit Machining Technol, Minist Educ, Dalian 116024, Peoples R China.
Reprint Address: Zou, HL (reprint author), Dalian Univ Technol, Key Lab Micro Nano Technol & Syst Liaoning Prov, Dalian 116024, Peoples R China.
E-mail Addresses: zouhl@dlut.edu.cn
ISSN: 0946-7076
Times Cited in Web of Science Core Collection: 0
美国《工程索引》（Ei Compendex） 收录 137 篇
1. Accession number: 20165003105795
Title: Automatic measurement equipment for micrometric displacement of piezoelectric ceramic piece of displacement compensator
Authors: Yang, Jin1, 2 ; Ren, Tong-Qun1, 2 ; Wang, Xiao-Dong1, 2
Author affiliation:
1- Key Laboratory for Precision & Non-traditional Machining of the Ministry of Education, Dalian University of Technology, Dalian; 116024, China
2- Key Laboratory for Micro/Nano Technology and System of Liao Ning Province, Dalian University of Technology, Dalian University of Technology, Dalian; 116024, China
Corresponding author: Wang, Xiao-Dong (xdwang@dlut.edu.cn)
Source: Guangxue Jingmi Gongcheng/Optics and Precision Engineering
Volume: 24; Pages: 461-467; Issue date: October 1, 2016
Document type: Journal article (JA)
2. Accession number: 20165003106606
Title: An improved measurement method of large hot forgings based on laser-aided multi-view stereo vision
Authors: Liu, Yang1 ; Liu, Wei1 ; Wang, Lingli1 ; Xu, Pengtao1 ; Fan, Chaonan1 ; Ding, Lichao1 ; Jia, Zhenyuan1
Author affiliation:
1- Key Laboratory for Precision and Non-traditional Machining Technology, Ministry of Education, Dalian University of Technology, Dalian, China
Corresponding author: Liu, Wei (lw2007@dlut.edu.cn)
Source: IEEE International Symposium on Industrial Electronics
Volume: 2016-November; Pages: 890-894; Issue date: November 15, 2016
Conference: 25th IEEE International Symposium on Industrial Electronics, ISIE 2016
Document type: Conference article (CA)
3. Accession number: 20163802824397
Title: Power-free water pump based on a superhydrophobic surface: Generation of a mushroom-like jet and anti-gravity long-distance transport
Authors: Huang, Shuai1 ; Song, Jinlong1 ; Lu, Yao2 ; Lv, Cunjing3 ; Zheng, Huanxi1 ; Liu, Xin1 ; Jin, Zhuji1 ; Zhao, Danyang1 ; Carmalt, Claire J.2 ; Parkin, Ivan P.2
Author affiliation:
1- Key Laboratory for Precision and Non-Traditional Machining Technology, Ministry of Education, Dalian University of Technology, Dalian; 116024, China
2- Materials Chemistry Research Centre, Department of Chemistry, University College London, 20 Gordon Street, London; WC1H 0AJ, United Kingdom
3- Center of Smart Interfaces, Technische Universität Darmstadt, Darmstadt; 64287, Germany
Corresponding author: Song, Jinlong (songjinlong@dlut.edu.cn)
Source: Journal of Materials Chemistry A
Volume: 4; Issue: 36; Pages: 13771-13777; Issue date: 2016
Document type: Journal article (JA)
4. Accession number: 20163602774223
Title: Adjusting the stability of plasma treated superhydrophobic surfaces by different modifications or microstructures
Authors: Liu, Jiyu1 ; Chen, Faze1 ; Zheng, Huanxi1 ; Liu, Shuo1 ; Sun, Jing1 ; Huang, Shuai1 ; Song, Jinlong1 ; Jin, Zhuji1 ; Liu, Xin1
Author affiliation:
1- Key Laboratory for Precision and Non-Traditional Machining Technology, Ministry of Education, Dalian University of Technology, Dalian; 116024, China
Corresponding author: Liu, Xin (xinliu@dlut.edu.cn)
Source: RSC Advances
Volume: 6; Issue: 83; Pages: 79437-79447; Issue date: 2016
Document type: Journal article (JA)
5. Accession number: 20160701953554
Title: Study on improving thickness uniformity of microfluidic chip mold in the electroforming process
Authors: Du, Liqun1, 2 ; Yang, Tong2 ; Zhao, Ming2 ; Tao, Yousheng2 ; Luo, Lei2 ; Wang, Lei3 ; Liu, Chong1, 2
Author affiliation:
1- Key Laboratory for Precision and Non-traditional Machining Technology of Ministry of Education, Dalian University of Technology, Dalian, China
2- Key Laboratory for Micro/Nano Technology and System of Liaoning Province, Dalian University of Technology, Dalian, China
3- CapitalBio Corporation, Beijing, China
Corresponding author: Du, Liqun (duliqun@dlut.edu.cn)
Source: Micromachines
Volume: 7; Issue: 1; Pages: 1-12; Issue date: 2016
Document type: Journal article (JA)
6. Accession number: 20153201109494
Title: Investigation in the interface adhesion strength between SU-8 photoresist and metal substrate by ultrasonic treatment
Authors: Zhang, Xiaolei1 ; Du, Liqun1, 2 ; Zhao, Ming1 ; Song, Chang1
Author affiliation:
1- Key Laboratory for Precision & Non-traditional Machining Technology of Ministry of Education, Dalian University of Technology, Dalian; 116024, China
2- Key Laboratory for Micro/Nano Technology and System of Liaoning Province, Dalian University of Technology, Dalian; 116024, China
Corresponding author: Du, Liqun (duliqun@dlut.edu.cn)
Source: Microsystem Technologies
Volume: 22; Issue: 10; Pages: 2425-2433; Issue date: October 1, 2016
Document type: Journal article (JA)
7. Accession number: 20154401451730
Title: Diamond-cutting ferrous metals assisted by cold plasma and ultrasonic elliptical vibration
Authors: Huang, S.1 ; Liu, X.1 ; Chen, F.Z.1 ; Zheng, H.X.1 ; Yang, X.L.1 ; Wu, L.B.1 ; Song, J.L.1 ; Xu, W.J.1
Author affiliation:
1- Key Laboratory for Precision & Non-traditional Machining of Ministry of Education, Dalian University of Technology, Dalian; Liaoning Province; 116024, China
Corresponding author: Xu, W.J. (wenjixu@dlut.edu.cn)
Source: International Journal of Advanced Manufacturing Technology
Volume: 85; Issue: 1-4; Pages: 673-681; Issue date: July 1, 2016
Document type: Journal article (JA)
8. Accession number: 20163202690036
Title: A photogrammetry pose measurement method for moving targets in a wind tunnel
Authors: Ma, Xin1 ; Liu, Wei1 ; Chen, Ling1 ; Lu, Jiwen1 ; Liu, Weixiao1 ; Zhang, Jiakun1 ; Jia, Zhenyuan1 ; Long, Changyu1 ; Yang, Zaihua1 ; Yi, Wangmi1
Author affiliation:
1- Key Laboratory for Precision and Non-traditional Machining Technology of the Ministry of Education, Dalian University of Technology, Dalian, China
Source: Conference Record - IEEE Instrumentation and Measurement Technology Conference
Volume: 2016-July; Issue date: July 22, 2016
Conference: 2016 IEEE International Instrumentation and Measurement Technology Conference, I2MTC 2016
Document type: Conference article (CA)
9. Accession number: 20161102109836
Title: Stability of plasma treated superhydrophobic surfaces under different ambient conditions
Authors: Chen, Faze1 ; Liu, Jiyu1 ; Cui, Yao1 ; Huang, Shuai1 ; Song, Jinlong1 ; Sun, Jing1 ; Xu, Wenji1 ; Liu, Xin1
Author affiliation:
1- Key Laboratory for Precision and Non-Traditional Machining Technology of Ministry of Education, School of Mechanical Engineering, Dalian University of Technology, Dalian, China
Corresponding author: Liu, Xin (xinliu@dlut.edu.cn)
Source: Journal of Colloid and Interface Science
Volume: 470; Pages: 221-228; Issue date: May 15, 2016
Document type: Journal article (JA)
10. Accession number: 20162002390134
Title: Study of Micro Groove Machining by Micro ECM
Authors: Chen, Chuangchuang1 ; Li, Jianzhong1 ; Zhan, Shicheng1 ; Yu, Zuyuan1 ; Xu, Wenji1
Author affiliation:
1- Key Laboratory for Precision and Non-traditional Machining Technology, Ministry of Education, Dalian University of Technology, China
Corresponding author: Yu, Zuyuan (zyu@dlut.edu.cn)
Source: Procedia CIRP
Volume: 42; Pages: 418-422; Issue date: 2016
Conference: 18th CIRP Conference on Electro Physical and Chemical Machining, ISEM 2016
Document type: Conference article (CA)
11. Accession number: 20161102079914
Title: Plasma Hydrophilization of Superhydrophobic Surface and Its Aging Behavior: The Effect of Micro/nanostructured Surface
Authors: Chen, Faze1 ; Xu, Wenji1 ; Huang, Shuai1 ; Liu, Jiyu1 ; Song, Jinlong1 ; Liu, Xin1
Author affiliation:
1- Key Laboratory for Precision and Non-Traditional Machining Technology, Ministry of Education, Dalian University of Technology, Dalian, China
Corresponding author: Liu, Xin (xinliu@dlut.edu.cn)
Source: Surface and Interface Analysis
Volume: 48; Issue: 6; Pages: 368-372; Issue date: June 1, 2016
Document type: Journal article (JA)
12. Accession number: 20162002372581
Title: A controllable material removal strategy considering force-geometry model of belt grinding processes
Authors: Wang, Yongqing1 ; Hou, Bo1 ; Wang, Fengbiao1 ; Ji, Zhichao1
Author affiliation:
1- Key Laboratory for Precision and Non-traditional Machining Technology of Ministry of Education, Dalian University of Technology, Dalian, China
Corresponding author: Hou, Bo (bhou@mail.dlut.edu.cn)
Source: International Journal of Advanced Manufacturing Technology; Pages: 1-11; Issue date: May 7, 2016
Document type: Article in Press
13. Accession number: 20164703029882
Title: A new approach to the pre-compensation of contour errorsfor three-axis machine tools using an adaptive cross-coupled controller
Authors: Liu, Weirui1 ; Sun, Yuwen1 ; Yuan, Xilin1 ; Chen, Mansen1
Author affiliation:
1- Key Laboratory for Precision and Non-Traditional Machining Technology of the Ministry of Education, Dalian University of Technology, Dalian; 116024, China
Corresponding author: Sun, Yuwen (xiands@dlut.edu.cn)
Source: International Journal of Advanced Manufacturing Technology; Pages: 1-15; Issue date: November 12, 2016
Document type: Article in Press
14. Accession number: 20164402961159
Title: Precise on-machine extraction of the surface normal vector using an eddy current sensor array
Authors: Wang, Yongqing1 ; Lian, Meng1 ; Liu, Haibo1 ; Ying, Yangwei1 ; Sheng, Xianjun1
Author affiliation:
1- Key Laboratory for Precision and Non-traditional Machining Technology, Ministry of Education, Dalian University of Technology, No. 2 Linggong Road, Dalian; 116024, China
Source: Measurement Science and Technology
Volume: 27; Issue: 11; Issue date: October 7, 2016
Document type: Journal article (JA)
15. Accession number: 20163002650114
Title: Element diffusion and material properties in transition layer of bending zone in laminated plates
Authors: Zhang, Pan1 ; Wang, Xuyue1
Author affiliation:
1- Key Laboratory of Precision and Non-Traditional Machining Technology of the Ministry of Education, School of Mechanical Engineering, Dalian University of Technology, Dalian; Liaoning; 116024, China
Corresponding author: Wang, Xuyue (wbzzd@dlut.edu.cn)
Source: Zhongguo Jiguang/Chinese Journal of Lasers
Volume: 43; Issue: 7; Issue date: July 10, 2016
Document type: Journal article (JA)
16. Accession number: 20162502515389
Title: Simulations and experiments on finishing process of screw surface by using abrasive flow machining
Authors: Gao, Hang1 ; Fu, You-Zhi1 ; Wang, Xuan-Ping1 ; Peng, Can1
Author affiliation:
1- Key Laboratory for Precision and Non-traditional Machining Technology of Ministry of Education, Dalian University of Technology, Dalian; 116024, China
Source: Zhejiang Daxue Xuebao (Gongxue Ban)/Journal of Zhejiang University (Engineering Science)
Volume: 50; Issue: 5; Pages: 920-926; Issue date: May 1, 2016
Document type: Journal article (JA)
17. Accession number: 20161802334499
Title: Low auto-fluorescence fabrication methods for plastic nanoslits
Authors: Yin, Zhifu1 ; Qi, Liping2 ; Zou, Helin1, 3 ; Sun, Lei1 ; Xu, Shenbo1
Author affiliation:
1- Key Laboratory for Micro/Nano Technology and Systems of Liaoning Province, Dalian University of Technology, Dalian, China
2- Department of Biomedical Engineering, Dalian University of Technology, Dalian, China
3- Key Laboratory for Precision and Non-traditional Machining Technology of Ministry of Education, Dalian University of Technology, Dalian, China
Corresponding author: Zou, Helin (zouhl@dlut.edu.cn)
Source: IET Nanobiotechnology
Volume: 10; Issue: 2; Pages: 75-80; Issue date: April 1, 2016
Document type: Journal article (JA)
18. Accession number: 20162002381477
Title: A load identification method for the grinding damage induced stress (GDIS) distribution in silicon wafers
Authors: Zhou, Ping1 ; Xu, Shance1 ; Wang, Ziguang1 ; Yan, Ying1 ; Kang, Renke1 ; Guo, Dongming1
Author affiliation:
1- Key Laboratory for Precision and Non-traditional Machining Technology, Ministry of Education, Dalian University of Technology, Dalian; 116024, China
Corresponding author: Zhou, Ping
Source: International Journal of Machine Tools and Manufacture
Volume: 107; Pages: 1-7; Issue date: August 1, 2016
Document type: Journal article (JA)
19. Accession number: 20162602532362
Title: Machining Parameter Optimization in High-Speed Milling for Inconel 718 Curved Surface
Authors: Ma, Jian-Wei1 ; Wang, Fu-Ji1 ; Jia, Zhen-Yuan1 ; Gao, Yuan-Yuan1
Author affiliation:
1- Key Laboratory for Precision and Non-traditional Machining Technology of the Ministry of Education, School of Mechanical Engineering, Dalian University of Technology, Dalian, China
Corresponding author: Ma, Jian-Wei (mjw2011@dlut.edu.cn)
Source: Materials and Manufacturing Processes
Volume: 31; Issue: 13; Pages: 1692-1699; Issue date: October 2, 2016
Document type: Journal article (JA)
20. Accession number: 20161002073712
Title: Tool wear appearance and failure mechanism of coated carbide tools in micro-milling of Inconel 718 super alloy
Authors: Lu, Xiaohong1 ; Jia, Zhenyuan1 ; Wang, Hua1 ; Si, Likun1 ; Liu, Yongyun1 ; Wu, Wenyi1
Author affiliation:
1- Key Laboratory for Precision and Non-traditional Machining Technology of Ministry of Education, Dalian University of Technology, Dalian, China
Corresponding author: Lu, Xiaohong (lxhdlut@dlut.edu.cn)
Source: Industrial Lubrication and Tribology
Volume: 68; Issue: 2; Pages: 267-277; Issue date: March 14, 2016
Document type: Journal article (JA)
21. Accession number: 20161402199727
Title: Calibration of binocular vision measurement system
Authors: Yang, Jing-Hao1 ; Liu, Wei1 ; Liu, Yang1 ; Wang, Fu-Ji1 ; Jia, Zhen-Yuan1
Author affiliation:
1- Key Laboratory for Precision and Non-traditional Machining Technology of the Ministry of Education, Dalian University of Technology, Dalian, China
Corresponding author: Liu, Wei (lw2007@dlut.edu.cn)
Source: Guangxue Jingmi Gongcheng/Optics and Precision Engineering
Volume: 24; Issue: 2; Pages: 300-308; Issue date: February 1, 2016
Document type: Journal article (JA)
22. Accession number: 20160902044563
Title: Review about chatter stability analysis in milling process
Authors: Lu, Xiao-Hong1 ; Wang, Feng-Chen1 ; Wang, Hua1 ; Wang, Xin-Xin1 ; Si, Li-Kun1
Author affiliation:
1- Key Laboratory for Precision and Non-traditional Machining Technology of Ministy of Education, University of Technology, Dalian, China
Source: Zhendong yu Chongji/Journal of Vibration and Shock
Volume: 35; Issue: 1; Pages: 74-82; Issue date: January 15, 2016
Document type: Journal article (JA)
23. Accession number: 20161502217764
Title: On adiabatic shear fracture in high-speed machining of martensitic precipitation-hardening stainless steel
Authors: Gu, Liyao1 ; Kang, Guozheng2 ; Chen, Hui3 ; Wang, Minjie4
Author affiliation:
1- State Key Laboratory of Traction Power, School of Mechanics and Engineering, School of Materials Science and Engineering, Southwest Jiaotong University, Chengdu, China
2- State Key Laboratory of Traction Power, School of Mechanics and Engineering, Southwest Jiaotong University, Chengdu, China
3- School of Materials Science and Engineering, Southwest Jiaotong University, Chengdu, China
4- Key Laboratory of the Ministry of Education for Precision and Non-traditional Machining, School of Mechanical Engineering, Dalian University of Technology, Dalian, China
Corresponding author: Gu, Liyao (guliyao0922@163.com)
Source: Journal of Materials Processing Technology
Volume: 234; Pages: 208-216; Issue date: August 1, 2016
Document type: Journal article (JA)
24. Accession number: 20161202141808
Title: Inverse surface integrity problem in ultrasonic impact-treated AISI 304 stainless steel components
Authors: Wang, G.Q.1 ; Zhu, X.P.1 ; Lei, M.K.1 ; Guo, D.M.2
Author affiliation:
1- Surface Engineering Laboratory, School of Materials Science and Engineering, Dalian University of Technology, Dalian; 116024, China
2- Key Laboratory for Precision and Non-traditional Machining of the Ministry of Education, Dalian University of Technology, Dalian; 116024, China
Corresponding author: Lei, M.K. (mklei@dlut.edu.cn)
Source: International Journal of Advanced Manufacturing Technology
Volume: 87; Issue: 5-8; Pages: 2033-2040; Issue date: November 1, 2016
Document type: Journal article (JA)
25. Accession number: 20154301433514
Title: Tool path planning and machining deformation compensation in high-speed milling for difficult-to-machine material thin-walled parts with curved surface
Authors: Gao, Yuan-yuan1 ; Ma, Jian-wei1 ; Jia, Zhen-yuan1 ; Wang, Fu-ji1 ; Si, Li-kun1 ; Song, De-ning1
Author affiliation:
1- Key Laboratory for Precision and Non-traditional Machining Technology of the Ministry of Education, School of Mechanical Engineering, Dalian University of Technology, Dalian; 116024, China
Corresponding author: Ma, Jian-wei (mjw2011@dlut.edu.cn)
Source: International Journal of Advanced Manufacturing Technology
Volume: 84; Issue: 9-12; Pages: 1757-1767; Issue date: June 1, 2016
Document type: Journal article (JA)
26. Accession number: 20162702554626
Title: Stress reduction method in fabrication of a multi-scale inertial switch with ultra-high aspect ratio
Authors: du, Liqun1, 2 ; Chen, Shengli2 ; Tao, Yousheng2 ; Luo, Lei2 ; Zhao, Ming2 ; Yang, Tong2 ; Liu, Shuangjie3 ; Hao, Yongping3
Author affiliation:
1- Key Laboratory for Precision and Non-traditional Machining Technology of Ministry of Education, Dalian University of Technology, Dalian; 116024, China
2- Key Laboratory for Micro/Nano Technology and System of Liaoning Province, Dalian University of Technology, Dalian; 116024, China
3- School of Equipment Engineering, Shenyang Ligong University, Shenyang; 110016, China
Corresponding author: du, Liqun (duliqun@dlut.edu.cn)
Source: Microsystem Technologies; Pages: 1-11; Issue date: June 28, 2016
Document type: Article in Press
27. Accession number: 20163602768510
Title: Novel drill structure for damage reduction in drilling CFRP composites
Authors: Jia, Zhenyuan1 ; Fu, Rao1 ; Niu, Bin1 ; Qian, Baowei1 ; Bai, Yu1 ; Wang, Fuji1
Author affiliation:
1- Key Laboratory for Precision and Non-traditional Machining Technology of Ministry of Education, Dalian University of Technology, Dalian; 116024, China
Corresponding author: Niu, Bin (niubin@dlut.edu.cn)
Source: International Journal of Machine Tools and Manufacture
Volume: 110; Pages: 55-65; Issue date: November 1, 2016
Document type: Journal article (JA)
28. Accession number: 20155301738847
Title: Experimental study on the process of adiabatic shear fracture in isolated segment formation in high-speed machining of hardened steel
Authors: Gu, Liyao1, 2 ; Wang, Minjie2 ; Chen, Hui1 ; Kang, Guozheng1
Author affiliation:
1- State key Laboratory of Traction Power & Institute of Materials Science and Engineering, Southwest Jiaotong University, Chengdu, China
2- Key Laboratory of the Ministry of Education for Precision and Non-traditional Machining, School of Mechanical Engineering, Dalian University of Technology, Dalian, China
Corresponding author: Gu, Liyao (guliyao0922@163.com)
Source: International Journal of Advanced Manufacturing Technology
Volume: 86; Issue: 1-4; Pages: 671-679; Issue date: September 1, 2016
Document type: Journal article (JA)
29. Accession number: 20163102663863
Title: Estimation and compensation for continuous-path running trajectory error in high-feed-speed machining
Authors: Song, De-ning1 ; Ma, Jian-wei1 ; Jia, Zhen-yuan1 ; Gao, Yuan-yuan1
Author affiliation:
1- Key Laboratory for Precision and Non-Traditional Machining Technology of the Ministry of Education, School of Mechanical Engineering, Dalian University of Technology, Dalian; 116024, China
Corresponding author: Ma, Jian-wei (mjw2011@dlut.edu.cn)
Source: International Journal of Advanced Manufacturing Technology
Volume: 89; Issue: 5-8; Pages: 1495-1508; Issue date: March 1, 2017
Document type: Journal article (JA)
30. Accession number: 20163002630690
Title: Interactions between Surface Integrity Parameters on AISI 304 Austenitic Stainless Steel Components by Ultrasonic Impact Treatment
Authors: Wang, G.Q.1 ; Lei, M.K.1 ; Guo, D.M.2
Author affiliation:
1- Surface Engineering Laboratory, School of Materials Science and Engineering, Dalian University of Technology, Dalian; 116024, China
2- Key Laboratory for Precision and Non-traditional Machining, Ministry of Education, Dalian University of Technology, Dalian; 116024, China
Corresponding author: Lei, M.K. (mklei@dlut.edu.cn)
Source: Procedia CIRP
Volume: 45; Pages: 323-326; Issue date: 2016
Conference: 3rd CIRP Conference on Surface Integrity, CIRP CSI 2016
Document type: Conference article (CA)
31. Accession number: 20161802323008
Title: Magnitude and Orientation Error Correction of a Superimposed Spatial Universal Rotating Magnetic Vector
Authors: Zhang, Yongshun1, 2 ; Su, Zhongkan1 ; Chi, Minglu1 ; Huang, Yunkui1 ; Wang, Dianlong1
Author affiliation:
1- Key Laboratory for Precision and Non-Traditional Machining, Ministry of China, Dalian University of Technology, Dalian, China
2- State Key Laboratory of Mechanical Transmissions, Chongqing University, Chongqing, China
Corresponding author: Zhang, Yongshun (zyshun@dlut.edu.cn)
Source: IEEE Transactions on Magnetics
Volume: 52; Issue: 5; Issue date: May 2016
Document type: Journal article (JA)
32. Accession number: 20161202136416
Title: Dimension relationship between spherical four-bar mechanisms with same couple curve
Authors: Jianwei, Sun1 ; Wenrui, Liu1 ; Jinkui, Chu2
Author affiliation:
1- School of Mechanical and Electrical Engineering, Changchun University of Technology, Changchun, China
2- Key Laboratory for Precision and Non-traditional Machining of Ministry of Education, Dalian University of Technology, Dalian, China
Corresponding author: Jianwei, Sun (avensun@tom.com)
Source: Mechanisms and Machine Science
Volume: 36; Pages: 175-185; Issue date: 2016
Conference: 3rd IEEE/IFToMM International Conference on Reconfigurable Mechanisms and Robots, ReMAR 2015
Document type: Conference article (CA)
33. Accession number: 20161502227347
Title: Chemical components and its functions of polishing solution used in electrogenerated chemical polishing of copper
Authors: Shan, Kun1 ; Zhou, Ping1 ; Cai, Jiqing1 ; Kang, Renke1 ; Guo, Dongming1
Author affiliation:
1- Key Laboratory for Precision and Non-Traditional Machining Technology of Ministry of Education, Dalian University of Technology, Dalian, China
Corresponding author: Zhou, Ping (pzhou@dlut.edu.cn)
Source: Jixie Gongcheng Xuebao/Journal of Mechanical Engineering
Volume: 52; Issue: 5; Pages: 88-94; Issue date: March 5, 2016
Document type: Journal article (JA)
34. Accession number: 20161702278075
Title: A low-cost method of fabricating hybrid micro-nano fluidic chip by double-layer PDMS mold and UV–thermal nanoimprinting
Authors: Sun, Lei1 ; Yin, Zhifu1 ; Qi, Liping2 ; Wu, Dongjiang3 ; Zou, Helin1, 3
Author affiliation:
1- Key Laboratory for Precision and Non-traditional Machining Technology of Ministry of Education, Dalian University of Technology, Dalian, China
2- Department of Biomedical Engineering, Dalian University of Technology, Dalian, China
3- Key Laboratory for Micro/Nano Technology and Systems of Liaoning Province, Dalian University of Technology, Dalian, China
Corresponding author: Zou, Helin (zouhl@dlut.edu.cn)
Source: Microfluidics and Nanofluidics
Volume: 20; Issue: 4; Issue date: April 1, 2016
Document type: Journal article (JA)
35. Accession number: 20170603325760
Title: Effect of contact stiffness between sheets and electrodes in piezoelectric force sensors
Authors: Jin, Lei1, 2 ; Jia, Zhenyuan1 ; Liu, Wei1
Author affiliation:
1- Key Laboratory for Precision and Non-traditional Machining Technology of the Ministry of Education, Dalian University of Technology, Dalian; 116024, China
2- Liaoning Provincial College of Communications, Shenyang; 110122, China
Corresponding author: Liu, Wei (lw2007@dlut.edu.cn)
Source: Jixie Gongcheng Xuebao/Journal of Mechanical Engineering
Volume: 52; Issue: 22; Pages: 15-23 and 30; Issue date: November 20, 2016
Document type: Journal article (JA)
36. Accession number: 20170303266102
Title: An experimental system for release simulation of internal stores in a supersonic wind tunnel
Authors: Liu, Wei1 ; Ma, Xin1 ; Jia, Zhenyuan1 ; Lu, Wenbo2 ; Wang, Zhengqu2 ; Chen, Ling1 ; Liu, Weixiao1 ; Lu, Jiwen1
Author affiliation:
1- Key Laboratory for Precision and Non-traditional Machining Technology of the Ministry of Education, Dalian University of Technology, Dalian; 116024, China
2- AVIC Aerodynamics Research Institute, Shenyang; 110034, China
Corresponding author: Liu, Wei (lw2007@dlut.edu.cn)
Source: Chinese Journal of Aeronautics
Volume: 30; Issue: 1; Pages: 186-195; Issue date: February 1, 2017
Document type: Journal article (JA)
37. Accession number: 20165003106610
Title: Improved calibration method of binocular vision measurement system for large hot forging
Authors: Yang, Jinghao1 ; Liu, Wei1 ; Fan, Chaonan1 ; Li, Shijie1 ; Wang, Fuji1 ; Jia, Zhenyuan1 ; Yan, Hongyue1 ; Li, Xiao1
Author affiliation:
1- Key Laboratory for Precision and Non-traditional Machining Technology, Ministry of Education, Dalian University of Technology, Dalian, China
Corresponding author: Liu, Wei (lw2007@dlut.edu.cn)
Source: IEEE International Symposium on Industrial Electronics
Volume: 2016-November; Pages: 918-922; Issue date: November 15, 2016
Conference: 25th IEEE International Symposium on Industrial Electronics, ISIE 2016
Document type: Conference article (CA)
38. Accession number: 20164803064726
Title: A methodology for helical mill-grinding of tiny internal threads made of hard brittle materials
Authors: Gao, Hang1 ; Lu, Shouxiang1 ; Yang, Anqiang1 ; Bao, Yongjie1
Author affiliation:
1- Key Laboratory for Precision and Non-traditional Machining Technology of Ministry of Education, Dalian University of Technology, No.2 Linggong Road, Ganjingzi District, Dalian; 116024, China
Corresponding author: Gao, Hang (hanggao4187@126.com)
Source: International Journal of Advanced Manufacturing Technology; Pages: 1-13; Issue date: November 16, 2016
Document type: Article in Press
39. Accession number: 20164102899204
Title: Model of grain depth of cut in wafer rotation grinding method for silicon wafers
Authors: Gao, Shang1 ; Wang, Ziguang1 ; Kang, Renke1 ; Dong, Zhigang1 ; Zhang, Bi1
Author affiliation:
1- Key Laboratory for Precision and Non-traditional Machining Technology of Ministry of Education, Dalian University of Technology, Dalian; 116024, China
Corresponding author: Kang, Renke (kangrk@dlut.edu.cn)
Source: Jixie Gongcheng Xuebao/Journal of Mechanical Engineering
Volume: 52; Issue: 17; Pages: 86-93; Issue date: September 5, 2016
Document type: Journal article (JA)
40. Accession number: 20160201796194
Title: Experimental study on high-power LEDs integrated with micro heat pipe
Authors: LI, Cong-ming1 ; Zhou, Chuan-peng1 ; Luo, Yi2 ; Hamidnia, Mohammad1 ; Wang, Xiao-dong2 ; You, Bo1
Author affiliation:
1- Key Laboratory for Micro/Nano Technology and System of Liaoning Province, Dalian University of Technology, Dalian, China
2- Key Laboratory for Precision and Non-traditional Machining of Ministry of Education, Dalian University of Technology, Dalian, China
Corresponding author: Luo, Yi (luoy@dlut.edu.cn)
Source: Optoelectronics Letters
Volume: 12; Issue: 1; Pages: 31-34; Issue date: January 1, 2016
Document type: Journal article (JA)
41. Accession number: 20161902371842
Title: Molecular dynamics study on the thickness of damage layer in multiple grinding of monocrystalline silicon
Authors: Guo, Xiaoguang1 ; Li, Qiang1 ; Liu, Tao1 ; Zhai, Changheng1 ; Kang, Renke1 ; Jin, Zhuji1
Author affiliation:
1- Key Laboratory for Precision and Non-traditional Machining, Ministry of Education, Dalian University of Technology, Dalian; 116024, China
Corresponding author: Li, Qiang (qiangli_0310@163.com)
Source: Materials Science in Semiconductor Processing
Volume: 51; Pages: 15-19; Issue date: August 15, 2016
Document type: Journal article (JA)
42. Accession number: 20160301807769
Title: Numerical study on thermal deformation characteristic of water-cooled mirror with interdigitated channels
Authors: Chen, Xiao1 ; Zhou, Ping1 ; Kang, Ren-Ke1 ; Dong, Zhi-Gang1
Author affiliation:
1- Key Laboratory for Precision and Non-traditional Machining Technology of Ministry of Education, Dalian University of Technology, Dalian, China
Corresponding author: Zhou, Ping (pzhou@dlut.edu.cn)
Source: Applied Thermal Engineering
Volume: 98; Pages: 357-364; Issue date: April 5, 2016
Document type: Journal article (JA)
43. Accession number: 20161302168159
Title: Blade surface uniformity of blisk finished by abrasive flow machining
Authors: Fu, Youzhi1 ; Wang, Xuanping1 ; Gao, Hang1 ; Wei, Haibo1 ; Li, Shichong1
Author affiliation:
1- Key Laboratory for Precision and Non-Traditional Machining Technology of Ministry of Education, Dalian University of Technology, Dalian, China
Corresponding author: Gao, Hang (hanggao4187@126.com)
Source: International Journal of Advanced Manufacturing Technology
Volume: 84; Issue: 5-8; Pages: 1725-1735; Issue date: May 1, 2016
Document type: Journal article (JA)
44. Accession number: 20160201798871
Title: Directional mechanical properties and wave propagation directionality of Kagome honeycomb structures
Authors: Niu, Bin1 ; Wang, Bo2
Author affiliation:
1- Key Laboratory for Precision and Nontraditional Machining Technology, Ministry of Education, School of Mechanical Engineering, Dalian University of Technology, Dalian, China
2- State Key Laboratory of Structural Analysis for Industrial Equipment, Department of Engineering Mechanics, Dalian University of Technology, Dalian, China
Corresponding author: Wang, Bo (wangbo@dlut.edu.cn)
Source: European Journal of Mechanics, A/Solids
Volume: 57; Pages: 45-58; Issue date: May 1, 2016
Document type: Journal article (JA)
45. Accession number: 20161502227359
Title: Prediction of adiabatic shear localization fracture in high speed machining
Authors: Gu, Liyao1, 2 ; Wang, Minjie1
Author affiliation:
1- Key Laboratory of Ministry of Education for Precision and Non-Traditional Machining, Dalian University of Technology, Dalian, China
2- School of Materials Science and Engineering, Southwest Jiaotong University, Chengdu, China
Corresponding author: Wang, Minjie (mjwang@dlut.edu.cn)
Source: Jixie Gongcheng Xuebao/Journal of Mechanical Engineering
Volume: 52; Issue: 5; Pages: 186-192; Issue date: March 5, 2016
Document type: Journal article (JA)
46. Accession number: 20162702565284
Title: Fast fabrication of superhydrophobic surfaces on Ti–6Al–4V substrates by deposition of lead
Authors: Wang, Lili1 ; Li, Haoyu1 ; Song, Jinlong1 ; Sun, Yuwen1
Author affiliation:
1- Key Laboratory for Precision and Non-traditional Machining Technology of the Ministry of Education, Dalian University of Technology, Dalian; 116024, China
Corresponding author: Sun, Yuwen (ywsun@dlut.edu.cn)
Source: Surface and Coatings Technology
Volume: 302; Pages: 507-514; Issue date: September 25, 2016
Document type: Journal article (JA)
47. Accession number: 20165003106604
Title: A monocular vision 3D measurement method based on refraction of light
Authors: Liu, Wei1 ; Ma, Xin1 ; Chen, Ling1 ; Yang, Jinghao1 ; Jia, Zhenyuan1
Author affiliation:
1- Key Laboratory for Precision and Non-traditional Machining Technology, Ministry of Education, Dalian University of Technology, Dalian, China
Corresponding author: Liu, Wei (lw2007@dlut.edu.cn)
Source: IEEE International Symposium on Industrial Electronics
Volume: 2016-November; Pages: 880-884; Issue date: November 15, 2016
Conference: 25th IEEE International Symposium on Industrial Electronics, ISIE 2016
Document type: Conference article (CA)
48. Accession number: 20165003113579
Title: Atmospheric Pressure Plasma Functionalized Polymer Mesh: An Environmentally Friendly and Efficient Tool for Oil/Water Separation
Authors: Chen, Faze1 ; Song, Jinlong1, 2 ; Liu, Ziai1 ; Liu, Jiyu1 ; Zheng, Huanxi1 ; Huang, Shuai1 ; Sun, Jing1 ; Xu, Wenji1 ; Liu, Xin1
Author affiliation:
1- Key Laboratory for Precision and Non-Traditional Machining Technology of Ministry of Education, Dalian University of Technology, No. 2 Linggong Road, Ganjingzi District, Dalian; 116024, China
2- Center of Smart Interfaces, Technische Universität Darmstadt, Alarich-Weiss-Straße 10, Darmstadt; 64287, Germany
Corresponding author: Liu, Xin (xinliu@dlut.edu.cn)
Source: ACS Sustainable Chemistry and Engineering
Volume: 4; Issue: 12; Pages: 6828-6837; Issue date: December 5, 2016
Document type: Journal article (JA)
49. Accession number: 20164302950185
Title: A device mimicking the biomechanical characteristics of crocodile skull for lumbar fracture reduction
Authors: Li, Jingmin1 ; Guo, Lihua1 ; Li, Yuancheng2 ; Lei, Zhenkun3 ; Liu, Yuanchang4 ; Shi, Weiping1 ; Li, Tao1 ; Li, Weikang3 ; Liu, Chong1, 5
Author affiliation:
1- Key Laboratory for Micro/Nano Technology and System of Liaoning Province, Dalian University of Technology, Dalian; 116024, China
2- Department of Orthopedics, First Affiliated Hospital, Dalian Medical University, Dalian; 116024, China
3- State Key Laboratory of Structural Analysis for Industrial Equipment, Dalian University of Technology, Dalian; 116024, China
4- Department of Mechanical Engineering, University College London, London; NW1 2BX, United Kingdom
5- Key Laboratory for Precision and Non-traditional Machining Technology, Ministry of Education, Dalian University of Technology, Dalian; 116024, China
Source: Bioinspiration and Biomimetics
Volume: 11; Issue: 5; Issue date: August 16, 2016
Document type: Journal article (JA)
50. Accession number: 20163902841511
Title: Unpowered oil absorption by a wettability sponge based oil skimmer
Authors: Liu, Ziai1 ; Wang, Xuyue1 ; Gao, Mingqian1 ; Song, Jinlong1 ; Huang, Liu1 ; Liu, Jiyu1 ; Liu, Xin1 ; Xu, Wei2 ; Zhao, Danyang1
Author affiliation:
1- Key Laboratory for Precision and Non-Traditional Machining Technology, Ministry of Education, Dalian University of Technology, Dalian; 116024, China
2- School of Mechanics and Civil Engineering, China University of Mining and Technology (Beijing), 100083, China
Corresponding author: Song, Jinlong (songjinlong@dlut.edu.cn)
Source: RSC Advances
Volume: 6; Issue: 91; Pages: 88001-88009; Issue date: 2016
Document type: Journal article (JA)
51. Accession number: 20164302933117
Title: Experimental research on dressing parameters of the plate in planetary double-sided grinding process
Authors: Song, De Bo1 ; Zhu, Xiang Long1 ; Kang, Ren Ke1 ; Jin, Zhu Ji1 ; Shi, Shuang Ji1 ; Zhang, Bi1
Author affiliation:
1- Key Laboratory for Precision and Non-traditional Machining Technology of Ministry of Education, Dalian University of Technology, Dalian; 116024, China
Corresponding author: Kang, Ren Ke (kangrk@dlut.edu.cn)
Source: Materials Science Forum
Volume: 874; Pages: 172-177; Issue date: 2016
Conference: 19th International Symposium on Advances in Abrasive Technology, ISAAT 2016
Document type: Conference article (CA)
52. Accession number: 20164102889922
Title: A novel approach to fabricating a nanotwinned surface on a ternary nickel alloy
Authors: Zhang, Zhenyu1, 2, 3 ; Wang, Bo1, 5 ; Huang, Siling1 ; Wen, Bin4 ; Yang, Song1 ; Zhang, Bi1, 6 ; Lin, Cheng-Te5 ; Jiang, Nan5 ; Jin, Zhongmin7 ; Guo, Dongming1
Author affiliation:
1- Key Laboratory for Precision and Non-Traditional Machining Technology, Ministry of Education, Dalian University of Technology, Dalian; 116024, China
2- Changzhou Institute of Dalian University of Technology, Changzhou; 213164, China
3- State Key Laboratory of Tribology, Tsinghua University, Beijing; 100084, China
4- State Key Laboratory of Metastable Materials Science and Technology, Yanshan University, Qinhuangdao; 066004, China
5- Key Laboratory of Marine Materials and Related Technologies, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo; 315201, China
6- Department of Mechanical Engineering, University of Connecticut, Storrs; CT; 06269, United States
7- School of Mechanical Engineering, University of Leeds, Leeds; LS2 9JT, United Kingdom
Corresponding author: Zhang, Zhenyu (zzy@dlut.edu.cn)
Source: Materials and Design
Volume: 106; Pages: 313-320; Issue date: September 15, 2016
Document type: Journal article (JA)
53. Accession number: 20154601546463
Title: Effect of roller burnishing process parameters on the surface roughness and microhardness for TA2 alloy
Authors: Yuan, X.L.1 ; Sun, Y.W.1 ; Gao, L.S.2 ; Jiang, S.L.1
Author affiliation:
1- Key Laboratory for Precision and Non-Traditional Machining Technology of the Ministry of Education, Dalian University of Technology, Dalian; 116024, China
2- School of Material Science and Engineering, Dalian University of Technology, Dalian; 116024, China
Corresponding author: Yuan, X.L. (glendream@163.com)
Source: International Journal of Advanced Manufacturing Technology
Volume: 85; Issue: 5-8; Pages: 1373-1383; Issue date: July 1, 2016
Document type: Journal article (JA)
54. Accession number: 20164302933078
Title: An advanced support method of aircraft skin mirror milling - Fluid lubricating support
Authors: Li, Zhao1 ; Bao, Yan1 ; Kang, Ren Ke1 ; Dong, Zhi Gang1 ; Zhou, Ping1 ; Jin, Zhu Ji1
Author affiliation:
1- Key Laboratory for Precision and Non-traditional Machining Technology of Ministry of Education, Dalian University of Technology, Dalian; 116024, China
Corresponding author: Kang, Ren Ke (kangrk@dlut.edu.cn)
Source: Materials Science Forum
Volume: 874; Pages: 469-474; Issue date: 2016
Conference: 19th International Symposium on Advances in Abrasive Technology, ISAAT 2016
Document type: Conference article (CA)
55. Accession number: 20162802582826
Title: A suppression method of image noise for cylindrical objects based on vision sensors
Authors: Liu, Wei1 ; Wang, Liang1 ; Jia, Zhenyuan1 ; Fan, Chaonan1 ; Yang, Jinghao1 ; Xu, Pengtao1 ; Wang, Lingli1 ; Liu, Yang1
Author affiliation:
1- Key Laboratory for Precision and Non-Traditional Machining Technology of the Ministry of Education, Dalian University of Technology, Dalian; 116024, China
Corresponding author: Liu, Wei (Lw2007@dlut.edu.cn)
Source: Sensors and Actuators, A: Physical
Volume: 247; Pages: 403-414; Issue date: August 15, 2016
Document type: Journal article (JA)
56. Accession number: 20154301432830
Title: A new cutting force modeling method in high-speed milling of curved surface with difficult-to-machine material
Authors: Ma, Jian-wei1 ; Jia, Zhen-yuan1 ; Wang, Fu-ji1 ; Gao, Yuan-yuan1 ; Liu, Zhen1
Author affiliation:
1- Key Laboratory for Precision and Non-traditional Machining Technology of the Ministry of Education, School of Mechanical Engineering, Dalian University of Technology, Dalian; 116023, China
Corresponding author: Ma, Jian-wei (mjw2011@dlut.edu.cn)
Source: International Journal of Advanced Manufacturing Technology
Volume: 84; Issue: 9-12; Pages: 2195-2205; Issue date: June 1, 2016
Document type: Journal article (JA)
57. Accession number: 20160501878539
Title: Significance of surface integrity on high-performance manufacturing by surface modification
Authors: Lei, M.K.1 ; Zhu, X.P.1 ; Li, Y.P.1 ; Guo, D.M.2
Author affiliation:
1- Surface Engineering Laboratory, School of Materials Science and Engineering, Dalian University of Technology, Dalian, China
2- Key Laboratory for Precision and Non-Traditional Machining of the Ministry of Education, Dalian University of Technology, Dalian, China
Corresponding author: Lei, M.K. (surfeng@dlut.edu.cn)
Source: International Journal of Advanced Manufacturing Technology
Volume: 82; Issue: 9-12; Pages: 1831-1842; Issue date: February 1, 2016
Document type: Journal article (JA)
58. Accession number: 20153401189133
Title: Burr Control for Removal of Metal Coating from Plastics Substrate by Micro-Milling
Authors: Zhao, Kai1 ; Jia, Zhenyuan1 ; Liu, Wei1 ; Ma, Jianwei1 ; Ding, Lichao1
Author affiliation:
1- Key Laboratory for Precision and Non-traditional Machining Technology, Ministry of Education, School of Mechanical Engineering, Dalian University of Technology, Dalian, China
Corresponding author: Jia, Zhenyuan (jzyxy@dlut.edu.cn)
Source: Materials and Manufacturing Processes
Volume: 31; Issue: 5; Pages: 641-647; Issue date: April 3, 2016
Document type: Journal article (JA)
59. Accession number: 20154801631587
Title: Dimension relationship between spherical four-bar mechanisms with same couple curve
Authors: Jianwei, Sun1 ; Wenrui, Liu1 ; Jinkui, Chu2
Author affiliation:
1- School of Mechanical and Electrical Engineering, Changchun University of Technology, Changchun, China
2- Key Laboratory for Precision and Non-traditional Machining of Ministry of Education, Dalian University of Technology, Dalian, China
Corresponding author: Jianwei, Sun (avensun@tom.com)
Source: Mechanisms and Machine Science
Volume: 36; Pages: 175-185; Issue date: 2016
Document type: Monograph chapter (MC)
60. Accession number: 20170903401233
Title: Fatigue property of laser welded joints of Hastelloy C-276 thin sheet
Authors: Liu, Shuai1 ; Wu, Dong-Dong1 ; Chai, Dong-Sheng1 ; Zhou, Si-Yu1 ; Ma, Guang-Yi1 ; Zhou, Ping1 ; Wu, Dong-Jiang1
Author affiliation:
1- Key Laboratory for Precision and Non-traditional Machining Technology, Ministry of Education, Dalian University of Technology, Dalian; 116024, China
Corresponding author: Wu, Dong-Jiang (djwudut@dlut.edu.cn)
Source: Zhongguo Youse Jinshu Xuebao/Chinese Journal of Nonferrous Metals
Volume: 26; Issue: 12; Pages: 2555-2563; Issue date: December 1, 2016
Document type: Journal article (JA)
61. Accession number: 20164502986959
Title: Comparison of thrust force in ultrasonic assisted drilling and conventional drilling of aluminum alloy
Authors: Li, Xiao Feng1 ; Dong, Zhi Gang1 ; Kang, Ren Ke1 ; Wang, Yi Dan1 ; Liu, Jin Ting1 ; Zhang, Yuan1
Author affiliation:
1- Key Laboratory for Precision and Non-traditional Machining Technology of Ministry of Education, Dalian University of Technology, Dalian; 116024, China
Corresponding author: Kang, Ren Ke (kangrk@dlut.edu.cn)
Source: Materials Science Forum
Volume: 861; Pages: 38-43; Issue date: 2016
Conference: 12th Asia-Pacific Conference on Materials Processing, APCMP2016
Document type: Conference article (CA)
62. Accession number: 20164502986962
Title: Grinding force of RB-SiC in ultrasonic assisted grinding with sintered diamond grinding wheel
Authors: Gao, Feng1 ; Zheng, Fei Fei1 ; Dong, Zhi Gang1 ; Kang, Ren Ke1 ; Duan, Jia Dong1
Author affiliation:
1- Key Laboratory for Precision and Non-traditional Machining Technology of Ministry of Education, Dalian University of Technology, Dalian; 116024, China
Corresponding author: Kang, Ren Ke (kangrk@dlut.edu.cn)
Source: Materials Science Forum
Volume: 861; Pages: 56-62; Issue date: 2016
Conference: 12th Asia-Pacific Conference on Materials Processing, APCMP2016
Document type: Conference article (CA)
63. Accession number: 20160601897847
Title: A new cutting force prediction method in ball-end milling based on material properties for difficult-to-machine materials
Authors: Jia, Zhen-yuan1 ; Ge, Jie1 ; Ma, Jian-wei1 ; Gao, Yuan-yuan1 ; Liu, Zhen1
Author affiliation:
1- Key Laboratory for Precision and Non-traditional Machining Technology of the Ministry of Education, School of Mechanical Engineering, Dalian University of Technology, Dalian; 116023, China
Corresponding author: Ma, Jian-wei (mjw2011@dlut.edu.cn)
Source: International Journal of Advanced Manufacturing Technology
Volume: 86; Issue: 9-12; Pages: 2807-2822; Issue date: October 1, 2016
Document type: Journal article (JA)
64. Accession number: 20164002872519
Title: Simultaneous and long-lasting hydrophilization of inner and outer wall surfaces of polytetrafluoroethylene tubes by transferring atmospheric pressure plasmas
Authors: Chen, Faze1, 2 ; Song, Jinlong1, 2 ; Huang, Shuai1, 2 ; Xu, Sihao2 ; Xia, Guangqing3 ; Yang, Dezheng4 ; Xu, Wenji1, 2 ; Sun, Jing1, 2 ; Liu, Xin1, 2
Author affiliation:
1- Key Laboratory for Precision and Non-Traditional Machining Technology, Ministry of Education, Dalian University of Technology, Dalian; 116024, China
2- School of Mechanical Engineering, Dalian University of Technology, Dalian; 116024, China
3- State Key Laboratory of Structure Analysis for Industrial Equipment, Dalian University of Technology, Dalian; 116024, China
4- Key Lab of Materials Modification, Dalian University of Technology, Ministry of Education, Dalian; 116024, China
Source: Journal of Physics D: Applied Physics
Volume: 49; Issue: 36; Issue date: August 10, 2016
Document type: Journal article (JA)
65. Accession number: 20161502214392
Title: Electrohydrodynamic jet printing and a preliminary electrochemistry test of graphene micro-scale electrodes
Authors: Wang, Dazhi1, 2 ; Zha, Wen1 ; Feng, Li1 ; Ma, Qian1 ; Liu, Xianming3 ; Yang, Ning3 ; Xu, Zheng1, 2 ; Zhao, Xiaojun1 ; Liang, Junsheng1, 2 ; Ren, Tongqun1, 2 ; Wang, Xiaodong1, 2
Author affiliation:
1- Key Laboratory for Micro, Nano Technology and System of Liaoning Province, Dalian University of Technology, Dalian; 116024, China
2- Key Laboratory for Precision and Non-traditional Machining Technology, Ministry of Education, Dalian University of Technology, Dalian; 116024, China
3- Dalian Institute of Chemical Physics, Chinese Academy of Sciences, Dalian; 116023, China
Source: Journal of Micromechanics and Microengineering
Volume: 26; Issue: 4; Issue date: March 7, 2016
Document type: Journal article (JA)
66. Accession number: 20162402499354
Title: Replication of large scale micro pillar array with different diameters by micro injection molding
Authors: Song, Mancang1 ; Zhao, Hui1 ; Liu, Junshan1 ; Liu, Chong1 ; Li, Jingmin1
Author affiliation:
1- Key Laboratory for Precision and Non-traditional Machining Technology of Ministry of Education, Dalian University of Technology, Dalian; 116024, China
Corresponding author: Song, Mancang (mcsong@dlut.edu.cn)
Source: Microsystem Technologies; Pages: 1-10; Issue date: June 9, 2016
Document type: Article in Press
67. Accession number: 20162402481116
Title: Effect of nickel particles on the interfacial adhesive strength between a Ni-P composite coating and a polymeric composite substrate
Authors: Sun, Shiyong1 ; Yang, Rui1 ; Han, Jian1 ; Guo, Huafeng1 ; Xing, Lingbing1
Author affiliation:
1- Key Laboratory for Precision and Non-traditional Machining Technology of Ministry of Education, School of Mechanical Engineering, Dalian University of Technology, Dalian, China
Corresponding author: Yang, Rui (yangrui@dlut.edu.cn)
Source: Surface and Coatings Technology
Volume: 297; Pages: 19-26; Issue date: July 15, 2016
Document type: Journal article (JA)
68. Accession number: 20153201157687
Title: Surface integrity and removal mechanism of chemical mechanical grinding of silicon wafers using a newly developed wheel
Authors: Dong, Zhigang1 ; Gao, Shang1 ; Huang, Han2 ; Kang, Renke1 ; Wang, Ziguang1
Author affiliation:
1- Key Laboratory for Precision and Non-traditional Machining Technology of Ministry of Education, Dalian University of Technology, Dalian, China
2- School of Mechanical and Mining Engineering, The University of Queensland, St Lucia; QLD, Australia
Corresponding author: Kang, Renke (kangrk@dlut.edu.cn)
Source: International Journal of Advanced Manufacturing Technology
Volume: 83; Issue: 5-8; Pages: 1231-1239; Issue date: March 1, 2016
Document type: Journal article (JA)
69. Accession number: 20144700226159
Title: Numerical study on the de-molding behavior of 2D PMMA nanochannles during hot embossing process
Authors: Yin, Zhifu1 ; Sun, Lei1 ; Cheng, E.1 ; Zou, Helin1, 2
Author affiliation:
1- Key Laboratory for Micro/Nano Technology and Systems of Liaoning Province, Dalian University of Technology, Dalian, China
2- Key Laboratory for Precision and Non-traditional Machining Technology of Ministry of Education, Dalian University of Technology, Dalian, China
Corresponding author: Zou, Helin (zouhl@dlut.edu.cn)
Source: Microsystem Technologies
Volume: 22; Issue: 1; Pages: 129-135; Issue date: January 1, 2016
Document type: Journal article (JA)
70. Accession number: 20160701914832
Title: Influence of porous structure on the machining performance of micro EDM
Authors: Zou, Rimao1 ; Yu, Zuyuan1 ; Li, Wei1 ; Guo, Meigang1 ; Li, Jianzhong1
Author affiliation:
1- Key Laboratory for Precision and Non-traditional Machining Technology of Ministry of Education, School of Mechanical Engineering, Dalian University of Technology, Dalian, China
Corresponding author: Yu, Zuyuan (zyu@dlut.edu.cn)
Source: Journal of Materials Processing Technology
Volume: 232; Pages: 43-51; Issue date: June 1, 2016
Document type: Journal article (JA)
71. Accession number: 20161002057481
Title: Preparation of durable underwater superoleophobic Ti6Al4V surfaces by electrochemical etching
Authors: Wang, L.L.1 ; Sun, Y.W.1 ; Gao, Y.Z.1 ; Guo, D.M.1
Author affiliation:
1- Key Laboratory for Precision and Non-Traditional Machining Technology, Ministry of Education, Dalian University of Technology, Dalian, China
Corresponding author: Sun, Y.W. (ywsun@dlut.edu.cn)
Source: Surface Engineering
Volume: 32; Issue: 2; Pages: 85-94; Issue date: 2016
Document type: Journal article (JA)
72. Accession number: 20161402177265
Title: Critical Coupling Magnetic Moment of a Petal-Shaped Capsule Robot
Authors: Zhang, Yongshun1, 2 ; Chi, Minglu1 ; Su, Zhongkan1
Author affiliation:
1- Key Laboratory for Precision and Non-Traditional Machining, Ministry of China, Dalian University of Technology, Dalian, China
2- State Key Laboratory of Mechanical Transmissions, Chongqing University, Chongqing, China
Corresponding author: Zhang, Yongshun (zyshun@dlut.edu.cn)
Source: IEEE Transactions on Magnetics
Volume: 52; Issue: 1; Issue date: January 2016
Document type: Journal article (JA)
73. Accession number: 20164603015990
Title: Design of infrared temperature measurement system for micro heat pipe
Authors: Li, Cong-Ming1 ; Luo, Yi1, 2 ; Zhou, Chuan-Peng1 ; Wang, Xiao-Dong1, 2
Author affiliation:
1- Key Laboratory for Micro/Nano Technology and System of Liaoning Province, Dalian University of Technology, Dalian; 116024, China
2- Key Laboratory for Precision and Non-traditional Machining of the Ministry of Education, Dalian University of Technology, Dalian; 116024, China
Corresponding author: Wang, Xiao-Dong (xdwang@dlut.edu.cn)
Source: Guangxue Jingmi Gongcheng/Optics and Precision Engineering
Volume: 24; Issue: 10; Pages: 2449-2455; Issue date: October 1, 2016
Document type: Journal article (JA)
74. Accession number: 20160101743191
Title: Study of Milling Time and Process Control Agent on W-Mo-Cr Pre-Alloying Powders
Authors: Shi, Shuangji1 ; Jin, Zhuji1 ; Bao, Yan1 ; Jiang, Guannan1
Author affiliation:
1- Key Laboratory for Precision and Non-Traditional Machining Technology, Ministry of Education, Dalian University of Technology, Dalian, China
Corresponding author: Jin, Zhuji (kimsg@dlut.edu.cn)
Source: Materials and Manufacturing Processes
Volume: 31; Issue: 7; Pages: 926-932; Issue date: May 18, 2016
Document type: Journal article (JA)
75. Accession number: 20161902364834
Title: Enhancing the adhesion strength of micro electroforming layer by ultrasonic agitation method and the application
Authors: Zhao, Zhong1 ; Du, Liqun1, 2 ; Tao, Yousheng2 ; Li, Qingfeng2 ; Luo, Lei2
Author affiliation:
1- Key Laboratory for Precision and Non-traditional Machining Technology, Ministry of Education, Dalian University of Technology, Dalian; 116024, China
2- Key Laboratory for Micro/Nano Technology and System of Liaoning Province, Dalian University of Technology, Dalian; 116024, China
Corresponding author: Du, Liqun (duliqun@dlut.edu.cn)
Source: Ultrasonics Sonochemistry
Volume: 33; Pages: 10-17; Issue date: November 1, 2016
Document type: Journal article (JA)
76. Accession number: 20162002390122
Title: Material Removal Modes of Quartz Crystals by Micro USM
Authors: Li, Guodong1 ; Yu, Zuyuan1 ; Song, Jiawen1 ; Li, Can1 ; Li, Jianzhong1 ; Natsu, Wataru2
Author affiliation:
1- Key Laboratory for Precision and Non-traditional Machining Technology, Ministry of Education, Dalian University of Technology, China
2- Department of Mechanical Systems Engineering, Tokyo University of Agriculture and Technology, Japan
Corresponding author: Yu, Zuyuan (zyu@dlut.edu.cn)
Source: Procedia CIRP
Volume: 42; Pages: 842-846; Issue date: 2016
Conference: 18th CIRP Conference on Electro Physical and Chemical Machining, ISEM 2016
Document type: Conference article (CA)
77. Accession number: 20162002390043
Title: Rapid Fabrication of Eutectic Ceramic Structures by Laser Engineered Net Shaping
Authors: Niu, Fangyong1 ; Wu, Dongjiang1 ; Ma, Guangyi1 ; Wang, Jiangtian1 ; Zhuang, Juan2 ; Jin, Zhuji1
Author affiliation:
1- Key Laboratory for Precision and Non-traditional Machining Technology, Ministry of Education, Dalian University of Technology, Dalian, Liaoning Province; 116024, China
2- School of Physics and Optoelectronic Engineering, Dalian University of Technology, Dalian, Liaoning Province; 116024, China
Corresponding author: Wu, Dongjiang (djwu@dlut.edu.cn)
Source: Procedia CIRP
Volume: 42; Pages: 91-95; Issue date: 2016
Conference: 18th CIRP Conference on Electro Physical and Chemical Machining, ISEM 2016
Document type: Conference article (CA)
78. Accession number: 20162402496758
Title: Electrospun fibrous electrodes with tunable microstructure made of polyaniline/multi-walled carbon nanotube suspension for all-solid-state supercapacitors
Authors: Liang, Junsheng1 ; Su, Shijie1 ; Fang, Xu1 ; Wang, Dazhi1, 2 ; Xu, Shuangchao2
Author affiliation:
1- Key Laboratory for Micro/Nano Technology and System of Liaoning Province, Dalian University of Technology, Dalian; 116023, China
2- Key Laboratory for Precision and Non-traditional Machining Technology of Ministry of Education, Dalian University of Technology, Dalian; 116023, China
Corresponding author: Wang, Dazhi (d.wang@dlut.edu.cn)
Source: Materials Science and Engineering B: Solid-State Materials for Advanced Technology
Volume: 211; Pages: 61-66; Issue date: September 1, 2016
Document type: Journal article (JA)
79. Accession number: 20161002069504
Title: Thermal behavior of silicon-copper micro vapor chamber for high power LEDs
Authors: Luo, Yi1 ; Li, Zhi-xin2 ; Zhou, Chuan-peng2 ; Wang, Xiao-dong1 ; You, Bo2
Author affiliation:
1- Key Laboratory for Precision and Non-traditional Machining of Ministry of Education, Dalian University of Technology, Dalian, China
2- Key Laboratory for Micro/Nano Technology and System of Liaoning Province, Dalian University of Technology, Dalian, China
Corresponding author: Luo, Yi (luoy@dlut.edu.cn)
Source: Optoelectronics Letters
Volume: 12; Issue: 2; Pages: 124-127; Issue date: March 1, 2016
Document type: Journal article (JA)
80. Accession number: 20163102668178
Title: Process of glass fiber/epoxy composites and coating interface adhesion with Ni particle reinforcement
Authors: Sun, Shiyong1 ; Yang, Rui1 ; Guo, Huafeng1 ; Han, Jian1
Author affiliation:
1- Key Laboratory for Precision and Non-traditional Machining Technology of Ministry of Education, School of Mechanical Engineering, Dalian University of Technology, Dalian; 116024, China
Corresponding author: Yang, Rui (yangrui@dlut.edu.cn)
Source: Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica
Volume: 33; Issue: 7; Pages: 1408-1415; Issue date: July 1, 2016
Document type: Journal article (JA)
81. Accession number: 20164302933145
Title: Deformation twinning of molecular dynamics simulation in a ternary titanium alloy under nanoindentation
Authors: Huang, Si Ling1 ; Zhang, Zhen Yu1 ; Cui, Jun Feng1 ; Yang, Song1 ; Guo, Xiao Guang1
Author affiliation:
1- Key Laboratory for Precision and Non-Traditional Machining Technology of Ministry of Education, Dalian University of Technology, Dalian; 116024, China
Corresponding author: Zhang, Zhen Yu (zzy@dlut.edu.cn)
Source: Materials Science Forum
Volume: 874; Pages: 328-332; Issue date: 2016
Conference: 19th International Symposium on Advances in Abrasive Technology, ISAAT 2016
Document type: Conference article (CA)
82. Accession number: 20164002873356
Title: Micro-macro-mechanical model and material removal mechanism of machining carbon fiber reinforced polymer
Authors: Niu, Bin1 ; Su, Youliang1 ; Yang, Rui1 ; Jia, Zhenyuan1
Author affiliation:
1- Key Laboratory for Precision and Non-traditional Machining Technology of Ministry of Education, School of Mechanical Engineering, Dalian University of Technology, Dalian; 116024, China
Corresponding author: Yang, Rui (yangrui@dlut.edu.cn)
Source: International Journal of Machine Tools and Manufacture
Volume: 111; Pages: 43-54; Issue date: December 1, 2016
Document type: Journal article (JA)
83. Accession number: 20163002630689
Title: Material Loading in Inverse Surface Integrity Problem Solution of Cemented Carbide Component Manufacturing by Surface Modification
Authors: Zhu, X.P.1 ; Zhang, F.G.1 ; Lei, M.K.1 ; Guo, D.M.2
Author affiliation:
1- Surface Engineering Laboratory, School of Materials Science and Engineering, Dalian University of Technology, Dalian; 116024, China
2- Key Laboratory for Precision and Non-traditional Machining, Ministry of Education, Dalian University of Technology, Dalian; 116024, China
Corresponding author: Lei, M.K. (mklei@dlut.edu.cn)
Source: Procedia CIRP
Volume: 45; Pages: 235-238; Issue date: 2016
Conference: 3rd CIRP Conference on Surface Integrity, CIRP CSI 2016
Document type: Conference article (CA)
84. Accession number: 20161402199908
Title: Comprehensive evaluation method for carbon/epoxy composite hole-making damages
Authors: Wen, Quan1 ; Guo, Dongming2 ; Gao, Hang2 ; Zhao, Dong3
Author affiliation:
1- School of Mechanical Engineering and Automation, Northeastern University, Shenyang, China
2- Key Laboratory for Precision and Non-traditional Machining Technology of Ministry of Education, Dalian University of Technology, Dalian, China
3- Universal Speed Reducer Factory, Dalian Huarui Heavy Industry Group Company Limited, Dalian, China
Corresponding author: Gao, Hang (gaohang@dlut.edu.cn)
Source: Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica
Volume: 33; Issue: 2; Pages: 265-272; Issue date: February 1, 2016
Document type: Journal article (JA)
85. Accession number: 20161802330838
Title: Controllable Water Adhesion and Anisotropic Sliding on Patterned Superhydrophobic Surface for Droplet Manipulation
Authors: Yang, Xiaolong1 ; Liu, Xin1 ; Lu, Yao2 ; Song, Jinlong1 ; Huang, Shuai1 ; Zhou, Shining1 ; Jin, Zhuji1 ; Xu, Wenji1
Author affiliation:
1- Key Lab. for Precision and Non-Traditional Machining Technology of the Ministry of Education, Dalian, University of Technology, Dalian, China
2- Department of Chemistry, University College London, 20 Gordon Street, London, United Kingdom
Corresponding author: Song, Jinlong (songjinlong@dlut.edu.cn)
Source: Journal of Physical Chemistry C
Volume: 120; Issue: 13; Pages: 7233-7240; Issue date: April 21, 2016
Document type: Journal article (JA)
86. Accession number: 20161902344609
Title: Adaptive numerical atlas method of spherical four-bar mechanism and its applications for harvester
Authors: Sun, Jianwei1 ; Chen, Lu1 ; Chu, Jinkui2 ; Liu, Xianping1
Author affiliation:
1- School of Mechatronic Engineering, Changchun University of Technology, Changchun, China
2- Key Laboratory for Precision and Nontraditional Machining Technology of Ministry of Education, Dalian University of Technology, Dalian, China
Source: Nongye Gongcheng Xuebao/Transactions of the Chinese Society of Agricultural Engineering
Volume: 32; Issue: 8; Pages: 56-62; Issue date: April 15, 2016
Document type: Journal article (JA)
87. Accession number: 20161002073711
Title: Research on the prediction model of micro-milling surface roughness of Inconel718 based on SVM
Authors: Lu, Xiaohong1 ; Hu, Xiaochen1 ; Wang, Hua1 ; Si, Likun1 ; Liu, Yongyun1 ; Gao, Lusi2
Author affiliation:
1- Key Laboratory for Precision and Non-traditional Machining Technology of Ministry of Education, Dalian University of Technology, Dalian, China
2- School of Materials Science and Engineering, Dalian University of Technology, Dalian, China
Corresponding author: Lu, Xiaohong (lxhdlut@dlut.edu.cn)
Source: Industrial Lubrication and Tribology
Volume: 68; Issue: 2; Pages: 206-211; Issue date: March 14, 2016
Document type: Journal article (JA)
88. Accession number: 20164903101387
Title: Image processing in dimensional measurement for hot large forgings based on laser-aided binocular machine vision system
Authors: Fan, Chaonan1 ; Liu, Wei1 ; Xu, Pengtao1 ; Liu, Yang1 ; Yang, Jinghao1 ; Wang, Lingli1 ; Jia, Zhenyuan1
Author affiliation:
1- Key Laboratory for Precision and Non-traditional, Machining Technology of the Ministry of Education, Dalian University of Technology, Dalian; 116023, China
Source: Proceedings of SPIE - The International Society for Optical Engineering
Volume: 10033; Issue date: 2016
Conference: 8th International Conference on Digital Image Processing, ICDIP 2016
Document type: Conference article (CA)
89. Accession number: 20164402970337
Title: Three-point-support method based on position determination of supports and wafers to eliminate gravity-induced deflection of wafers
Authors: Liu, Haijun1 ; Zhu, Xianglong1 ; Kang, Renke1 ; Dong, Zhigang1 ; Chen, Xiuyi1
Author affiliation:
1- Key Laboratory for Precision and Non-traditional Machining of Ministry of Education, Dalian University of Technology, Dalian, China
Corresponding author: Dong, Zhigang (dongzg@dlut.edu.cn)
Source: Precision Engineering
Volume: 46; Pages: 339-348; Issue date: October 1, 2016
Document type: Journal article (JA)
90. Accession number: 20164502975864
Title: An investigation of direct powder forging of nickel superalloy FGH96
Authors: Fang, Shuang1, 2 ; Shi, Zhusheng2 ; Bai, Qian2, 3 ; Jiang, Jiaying2 ; Wang, Shu Yun1, 2 ; Lin, Jian Guo2
Author affiliation:
1- Beijing Institute of Aeronautical Materials, Beijing; 100095, China
2- Department of Mechanical Engineering, Imperial College London, London; SW7 2AZ, United Kingdom
3- Key Laboratory for Precision and Non-Traditional Machining Technology of Ministry of Education, Dalian University of Technology, Dalian; 116024, China
Source: Key Engineering Materials
Volume: 716; Pages: 793-799; Issue date: 2016
Conference: 16th Metal Forming International Conference, 2016
Document type: Conference article (CA)
91. Accession number: 20164302933063
Title: Chemical mechanical polishing on extremely low expansion glass ceramic wafers
Authors: Shi, Zhi Feng1 ; Zhang, Zhen Yu1 ; Huang, Si Ling1 ; Yuan, Bo Ya1, 2 ; Guo, Xiao Guang1 ; Zhou, Ping1 ; Jin, Zhu Ji1
Author affiliation:
1- Key Laboratory for Precision and Non-Traditional Machining Technology of Ministry of Education, Dalian University of Technology, Dalian; 116024, China
2- Key Laboratory of Marine Materials and Related Technologies, Zhejiang Key Laboratory of Marine Materials and Protective Technologies, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo; 315201, China
Corresponding author: Zhang, Zhen Yu (zzy@dlut.edu.cn)
Source: Materials Science Forum
Volume: 874; Pages: 389-394; Issue date: 2016
Conference: 19th International Symposium on Advances in Abrasive Technology, ISAAT 2016
Document type: Conference article (CA)
92. Accession number: 20164302933146
Title: Mechanical property and characterization on diamond films deposited on WC-Co substrates
Authors: Zhou, Hong Xiu1 ; Li, Ming Lei1, 3 ; Yuan, Bo Ya2, 3
Author affiliation:
1- School of Energy and Power Engineering, Dalian University of Technology, Dalian; 116024, China
2- Key Laboratory for Precision and Non-Traditional Machining Technology of Ministry of Education, Dalian University of Technology, Dalian; 116024, China
3- Key Laboratory of Marine Materials and Related Technologies, Zhejiang Key Laboratory of Marine Materials and Protective Technologies, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo; 315201, China
Corresponding author: Zhou, Hong Xiu (hxzhou@dlut.edu.cn)
Source: Materials Science Forum
Volume: 874; Pages: 333-338; Issue date: 2016
Conference: 19th International Symposium on Advances in Abrasive Technology, ISAAT 2016
Document type: Conference article (CA)
93. Accession number: 20164102899215
Title: High-performance surface layer manufacturing: A precision processing method based on controllable surface integrity
Authors: Lei, Mingkai1 ; Guo, Dongming2
Author affiliation:
1- School of Materials Science and Engineering, Dalian University of Technology, Dalian; 116024, China
2- Key Laboratory for Precision and Non-traditional Machining of the Ministry of Education, Dalian University of Technology, Dalian; 116024, China
Corresponding author: Lei, Mingkai (mklei@dlut.edu.cn)
Source: Jixie Gongcheng Xuebao/Journal of Mechanical Engineering
Volume: 52; Issue: 17; Pages: 187-197; Issue date: September 5, 2016
Document type: Journal article (JA)
94. Accession number: 20154601546420
Title: A water dissolution method for removing micro-waviness caused by SPDT process on KDP crystals
Authors: Wang, Xu1 ; Gao, Hang1 ; Chen, Yuchuan1 ; Guo, Dongming1
Author affiliation:
1- Key Laboratory for Precision and Non-traditional Machining Technology of Ministry of Education, Dalian University of Technology, Dalian; 116024, China
Corresponding author: Gao, Hang (hanggao4187@126.com)
Source: International Journal of Advanced Manufacturing Technology
Volume: 85; Issue: 5-8; Pages: 1347-1360; Issue date: July 1, 2016
Document type: Journal article (JA)
95. Accession number: 20160301815510
Title: An improved image acquisition method for measuring hot forgings using machine vision
Authors: Liu, Yang1 ; Jia, Zhenyuan1 ; Liu, Wei1 ; Wang, Lingli1 ; Fan, Chaonan1 ; Xu, Pengtao1 ; Yang, Jinghao1 ; Zhao, Kai1
Author affiliation:
1- Key Laboratory for Precision and Non-Traditional Machining Technology, Ministry of Education, Dalian University of Technology, Dalian, China
Corresponding author: Liu, Wei (Lw2007@dlut.edu.cn)
Source: Sensors and Actuators, A: Physical
Volume: 238; Pages: 369-378; Issue date: February 1, 2016
Document type: Journal article (JA)
96. Accession number: 20163202683982
Title: Polyurethane-rubber punching process for micro-hole arrays
Authors: Sun, Jing1 ; Zhou, Shining1 ; Yang, Xiaolong1 ; Xing, Yingjie1 ; Liu, Xin1
Author affiliation:
1- Key Laboratory for Precision and Non-Traditional Machining Technology of the Ministry of Education, Dalian University of Technology, Dalian; 116024, China
Corresponding author: Liu, Xin (xinliu@dlut.edu.cn)
Source: Microsystem Technologies; Pages: 1-8; Issue date: July 28, 2016
Document type: Article in Press
97. Accession number: 20163302718113
Title: Surface modification of tube inner wall by transferred atmospheric pressure plasma
Authors: Chen, Faze1 ; Liu, Shuo1 ; Liu, Jiyu1 ; Huang, Shuai1 ; Xia, Guangqing2 ; Song, Jinlong1 ; Xu, Wenji1 ; Sun, Jing1 ; Liu, Xin1
Author affiliation:
1- Key Laboratory for Precision and Non-Traditional Machining Technology of Ministry of Education, Dalian University of Technology, Dalian; 116024, China
2- State Key Laboratory of Structure Analysis for Industrial Equipment, Dalian University of Technology, Dalian; 116024, China
Corresponding author: Liu, Xin (xinliu@dlut.edu.cn)
Source: Applied Surface Science
Volume: 389; Pages: 967-976; Issue date: December 15, 2016
Document type: Journal article (JA)
98. Accession number: 20163202684421
Title: Patterning of water traps using close-loop hydrophilic micro grooves
Authors: Yang, Xiaolong1 ; Liu, Xin1 ; Song, Jinlong1 ; Sun, Jing1 ; Lu, Xiaohong1 ; Huang, Shuai1 ; Chen, Faze1 ; Xu, Wenji1
Author affiliation:
1- Key Laboratory for Precision and Non-Traditional Machining Technology of the Ministry of Education, Dalian University of Technology, Dalian; 116024, China
Corresponding author: Liu, Xin (xinliu@dlut.edu.cn)
Source: Applied Surface Science
Volume: 389; Pages: 447-454; Issue date: December 15, 2016
Document type: Journal article (JA)
99. Accession number: 20161702288933
Title: Influence of initial current density on bonding strength between Ni layer and Cu substrate in microelectroforming
Authors: Shao, Ligeng1, 2 ; Wang, Liding2, 3 ; Du, Liqun2, 3
Author affiliation:
1- Key Laboratory for New Energy Battery of Liaoning Province, Dalian Jiaotong University, Dalian, China
2- Key Laboratory for Precision and Non-traditional Machining Technology, Ministry of Education, Dalian University of Technology, Dalian, China
3- Key Laboratory for Micro/Nano Technology and System of Liaoning Province, Dalian University of Technology, Dalian, China
Corresponding author: Du, Liqun (duliqun@dlut.edu.cn)
Source: Journal of Adhesion Science and Technology
Volume: 30; Issue: 18; Pages: 2013-2023; Issue date: September 16, 2016
Document type: Journal article (JA)
100. Accession number: 20162102418259
Title: Research on surface residual stress of micro-milling nickel-based superalloy Inconel 718
Authors: Lu, Xiaohong1 ; Lu, Yanjun1 ; Wang, Furui1 ; Zhao, Chunyu1 ; Gao, Lusi2 ; Si, Likun1
Author affiliation:
1- Key Laboratory for Precision and Non-traditional Machining Technology, Ministry of Education, Dalian University of Technology, No. 2 LingGong Road, Dalian, LiaoNing Province, China
2- School of Materials Science and Engineering, Dalian University of Technology, No. 2 LingGong Road, Dalian, LiaoNing Province, China
Corresponding author: Lu, Xiaohong (lxhdlut@dlut.edu.cn)
Source: International Journal of Nanomanufacturing
Volume: 12; Issue: 1; Pages: 82-92; Issue date: 2016
Document type: Journal article (JA)
101. Accession number: 20160701931774
Title: Tool path optimization for five-axis flank milling with cutter runout effect using the theory of envelope surface based on CL data for general tools
Authors: Guo, Qiang1 ; Sun, Yuwen2 ; Jiang, Yan3 ; Yan, Yanyan1 ; Zhao, Bo1 ; Ming, Pingmei1
Author affiliation:
1- School of Mechanical and Power Engineering, Henan Polytechnic University, Jiaozuo, China
2- Key Laboratory for Precision and Non-Traditional Machining Technology of, Ministry of Education, Dalian University of Technology, Dalian, China
3- School of Survey and Land Information Engineering, Henan Polytechnic University, Jiaozuo, China
Corresponding author: Guo, Qiang (guoqiang@hpu.edu.cn)
Source: Journal of Manufacturing Systems
Volume: 38; Pages: 87-97; Issue date: 2016
Document type: Journal article (JA)
102. Accession number: 20154501507222
Title: Reducing geometrical, physical, and chemical constraints in surface integrity of high-performance stainless steel components by surface modification
Authors: Lei, M.K.1 ; Zhu, X.P.1 ; Guo, D.M.2
Author affiliation:
1- Surface Engineering Laboratory, School of Materials Science and Engineering, Dalian University of Technology, Dalian, China
2- Key Laboratory for Precision and Non-Traditional Machining, Ministry of Education, Dalian University of Technology, Dalian, China
Corresponding author: Lei, M.K.
Source: Journal of Manufacturing Science and Engineering, Transactions of the ASME
Volume: 138; Issue: 4; Issue date: April 1, 2016
Document type: Journal article (JA)
103. Accession number: 20160701953711
Title: Underwater Spontaneous Pumpless Transportation of Nonpolar Organic Liquids on Extreme Wettability Patterns
Authors: Huang, Shuai1 ; Song, Jinlong1 ; Lu, Yao2 ; Chen, Faze1 ; Zheng, Huanxi1 ; Yang, Xiaolong1 ; Liu, Xin1 ; Sun, Jing1 ; Carmalt, Claire J.2 ; Parkin, Ivan P.2 ; Xu, Wenji1
Author affiliation:
1- Key Laboratory for Precision and Non-Traditional Machining Technology of Ministry of Education, Dalian University of Technology, Dalian, China
2- Materials Chemistry Research Centre, Department of Chemistry, University College London, 20 Gordon Street, London, United Kingdom
Corresponding author: Song, Jinlong (songjinlong@dlut.edu.cn)
Source: ACS Applied Materials and Interfaces
Volume: 8; Issue: 5; Pages: 2942-2949; Issue date: February 17, 2016
Document type: Journal article (JA)
104. Accession number: 20164803059861
Title: Development of a new micro punching machine with micro male and female dies fabricated online
Authors: Yang, Xiaolong1 ; Zhou, Shining1 ; Yu, Zuyuan1 ; Li, Jianzhong1 ; Zeng, Zhijie1 ; Xing, Yingjie1 ; Liu, Xin1
Author affiliation:
1- Key Laboratory for Precision and Non-Traditional Machining Technology of the Ministry of Education, Dalian University of Technology, Dalian 116023, People's Republic of China
Corresponding author: Liu, Xin (xinliu@dlut.edu.cn)
Source: Precision Engineering; Issue date: December 31, 2015
Document type: Article in Press
105. Accession number: 20165103150097
Title: Isothermally hot-embossing methodology for flattening of plastic microreactor
Authors: Xu, Zheng1 ; Luan, Qing-Lei1 ; Cao, Dong2 ; Du, Li-Qun1 ; Liu, Chong2
Author affiliation:
1- Key Laboratory for Micro/Nano Technology and System of Liaoning Province, Dalian University of Technology, Dalian; 116085, China
2- Key Laboratory for Precision and Non-traditional Machining Technology of the Ministry of Education, Dalian University of Technology, Dalian; 116085, China
Corresponding author: Xu, Zheng (xuzheng@dlut.edu.cn)
Source: Guangxue Jingmi Gongcheng/Optics and Precision Engineering
Volume: 24; Issue: 11; Pages: 2705-2711; Issue date: November 1, 2016
Document type: Journal article (JA)
106. Accession number: 20164703027395
Title: Significant Enhancement of the Adhesion between Metal Films and Polymer Substrates by UV-Ozone Surface Modification in Nanoscale
Authors: Liu, Junshan1, 2 ; He, Licheng1 ; Wang, Liang1 ; Man, Yuncheng1 ; Huang, Luyi3 ; Xu, Zheng1 ; Ge, Dan3 ; Li, Jingmin1 ; Liu, Chong1, 2 ; Wang, Liding1, 2
Author affiliation:
1- Key Laboratory for Micro/Nano Technology and System of Liaoning Province, Dalian University of Technology, Dalian, Liaoning; 116024, China
2- Key Laboratory for Precision and Non-Traditional Machining Technology, Ministry of Education, Dalian University of Technology, Dalian, Liaoning; 116024, China
3- School of Chemical Engineering, Dalian University of Technology, Dalian, Liaoning; 116024, China
Corresponding author: Liu, Junshan (liujs@dlut.edu.cn)
Source: ACS Applied Materials and Interfaces
Volume: 8; Issue: 44; Pages: 30576-30582; Issue date: November 9, 2016
Document type: Journal article (JA)
107. Accession number: 20164302933144
Title: Nanotwinned surface on a ternary titanium alloy with increased hardness induced under nanoindentations
Authors: Zhou, Hong Xiu1 ; Li, Ming Lei1, 3 ; Duan, Neng Dong2, 3 ; Wang, Bo2, 3 ; Shi, Zhi Feng2 ; Lyu, Ji Lei3 ; Chen, Guo Xin3
Author affiliation:
1- School of Energy and Power Engineering, Dalian University of Technology, Dalian; 116024, China
2- Key Laboratory for Precision and Non-Traditional Machining Technology of Ministry of Education, Dalian University of Technology, Dalian; 116024, China
3- Key Laboratory of Marine Materials and Related Technologies, Zhejiang Key Laboratory of Marine Materials and Protective Technologies, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo; 315201, China
Corresponding author: Zhou, Hong Xiu (hxzhou@dlut.edu.cn)
Source: Materials Science Forum
Volume: 874; Pages: 323-327; Issue date: 2016
Conference: 19th International Symposium on Advances in Abrasive Technology, ISAAT 2016
Document type: Conference article (CA)
108. Accession number: 20164302933140
Title: Fabrication of nanotwinned surface on a nickel alloy using a developed diamond panel with tips array
Authors: Wang, Bo1, 2 ; Zhang, Zhen Yu1 ; Duan, Neng Dong1, 2 ; Lyu, Ji Lei2 ; Chen, Guo Xin2 ; You, Zhi Heng2 ; Shi, Zhi Feng1 ; Huang, Si Ling1
Author affiliation:
1- Key Laboratory for Precision and Non-Traditional Machining Technology of Ministry of Education, Dalian University of Technology, Dalian; 116024, China
2- Key Laboratory of Marine Materials and Related Technologies, Zhejiang Key Laboratory of Marine Materials and Protective Technologies, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo; 315201, China
Corresponding author: Zhang, Zhen Yu (zzy@dlut.edu.cn)
Source: Materials Science Forum
Volume: 874; Pages: 3-8; Issue date: 2016
Conference: 19th International Symposium on Advances in Abrasive Technology, ISAAT 2016
Document type: Conference article (CA)
109. Accession number: 20164102886505
Title: Precision calibration method for binocular vision measurement systems based on arbitrary translations and 3D-connection information
Authors: Yang, Jinghao1 ; Jia, Zhenyuan1 ; Liu, Wei1 ; Fan, Chaonan1 ; Xu, Pengtao1 ; Wang, Fuji1 ; Liu, Yang1
Author affiliation:
1- Key Laboratory for Precision and Non-traditional Machining Technology, Ministry of Education, Dalian University of Technology, No.2 Linggong Road, Dalian; 116024, China
Source: Measurement Science and Technology
Volume: 27; Issue: 10; Issue date: September 9, 2016
Document type: Journal article (JA)
110. Accession number: 20163802821849
Title: Indexing error transfer law of a gear grinding machine
Authors: Ling, Si-Ying1 ; Li, Jun2 ; Yu, Dian-Qing3 ; Jia, Ying2 ; Wang, Li-Ding1, 2 ; Lou, Zhi-Feng1
Author affiliation:
1- Key Laboratory for Precision & Non-traditional Machining of the Ministry of Education, Dalian University of Technology, Dalian; 116023, China
2- Key Laboratory for Micro/Nano Technology and System of Liaoning Province, Dalian University of Technology, Dalian; 116023, China
3- Liaoning Research Institute of Metrology, Shenyang; 110004, China
Corresponding author: Ling, Si-Ying (luckling 168@163.com)
Source: Guangxue Jingmi Gongcheng/Optics and Precision Engineering
Volume: 24; Issue: 8; Pages: 1934-1939; Issue date: August 1, 2016
Document type: Journal article (JA)
111. Accession number: 20164102899203
Title: Fabrication of fine grinding wheel controlled by annular magnetic field and its grinding performance
Authors: Gong, Sheng1 ; Wang, Yongqiang1, 2 ; Yin, Shaohui1 ; Chen, Fengjun1 ; Kang, Renke3 ; Ye, Bing1 ; Hu, Tian4
Author affiliation:
1- National Engineering Research Center for High Efficiency Grinding, Hunan University, Changsha; 410082, China
2- School of Mechanical Engineering, University of South China, Hengyang; 421001, China
3- Key Laboratory for Precision and Non-traditional Machining Technology of Ministry of Education, Dalian University of Technology, Dalian; 116023, China
4- Changsha Nano-meter Ultra-precision Manufacturing Technology Ltd. Corp., Changsha; 430100, China
Corresponding author: Yin, Shaohui (yinshaohui@hnu.edu.cn)
Source: Jixie Gongcheng Xuebao/Journal of Mechanical Engineering
Volume: 52; Issue: 17; Pages: 78-85; Issue date: September 5, 2016
Document type: Journal article (JA)
112. Accession number: 20161102079731
Title: A thermal bonding method based on O2plasma and water treatment for fabrication of PET planar nanofluidic device
Authors: Chen, Li1, 2 ; Yin, Zhifu2 ; Zou, Helin2 ; Liu, Junshan1, 2 ; Liu, Chong1, 2 ; Li, Kehong1
Author affiliation:
1- Key Laboratory for Micro/Nano Technology and System of Liaoning Province, Dalian University of Technology, Dalian, China
2- Key Laboratory for Precision and Non-Traditional Machining Technology of Ministry of Education, Dalian University of Technology, Dalian, China
Corresponding author: Liu, Junshan (liujs@dlut.edu.cn)
Source: Microsystem Technologies; Pages: 1-7; Issue date: March 4, 2016
Document type: Article in Press
113. Accession number: 20162102421429
Title: Electrohydrodynamic atomization deposition and mechanical polishing of PZT thick films
Authors: Wang, D.1, 2 ; Li, X.1 ; Shi, P.1 ; Zhao, X.1 ; Liang, J.1, 2 ; Ren, T.1, 2 ; Dong, W.3 ; Yang, R.1 ; Wang, Y.1 ; Dorey, R.A.4
Author affiliation:
1- Key Laboratory for Micro/Nano Technology and System of Liaoning Province, Dalian University of Technology, Dalian; 116024, China
2- Key Laboratory for Precision and Non-traditional Machining Technology of Ministry of Education, Dalian University of Technology, Dalian; 116024, China
3- College of Electronic Science and Technology, Dalian University of Technology, Dalian; 116024, China
4- University of Surrey, Surrey; GU2 7XH, United Kingdom
Corresponding author: Ren, T. (ren_tq@dlut.edu.cn)
Source: Ceramics International
Volume: 42; Issue: 11; Pages: 12623-12629; Issue date: August 15, 2016
Document type: Journal article (JA)
114. Accession number: 20163602781728
Title: Modeling and numerical analysis of multi-bolt elastic interaction with bolt stress relaxation
Authors: Wang, Y.-Q.1 ; Wu, J.-K.1 ; Liu, H.-B.1 ; Xu, S.-T.1
Author affiliation:
1- Key Laboratory for Precision and Non-traditional Machining Technology, Ministry of Education, Dalian University of Technology, Dalian; 116024, China
Corresponding author: Liu, H.-B. (hbliu@dlut.edu.cn)
Source: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
Volume: 230; Issue: 15; Pages: 2579-2587; Issue date: September 1, 2016
Document type: Journal article (JA)
115. Accession number: 20160401852615
Title: Ultra-precision cutting for quartz glass based on smoothing particle hydrodynamics method
Authors: Guo, Xiaoguang1 ; Zheng, Guilin1 ; Kang, Renke1 ; Jin, Zhuji1 ; Guo, Dongming1
Author affiliation:
1- Key Laboratory for Precision and Non-Traditional Machining Technology of Ministry of Education, Dalian University of Technology, Dalian; Liaoning, China
Corresponding author: Zheng, Guilin (771380742@qq.com)
Source: Kuei Suan Jen Hsueh Pao/Journal of the Chinese Ceramic Society
Volume: 44; Issue: 1; Pages: 142-147; Issue date: January 1, 2016
Document type: Journal article (JA)
116. Accession number: 20152200882652
Title: Optimization of the profile of the nano-mold and the imprinting conditions by numerical simulation method
Authors: Yin, Zhifu1 ; Sun, Lei1 ; Zou, Helin1, 2 ; Xu, Shenbo1
Author affiliation:
1- Key Laboratory for Micro/Nano Technology and Systems of Liaoning Province, Dalian University of Technology, Dalian, China
2- Key Laboratory for Precision and Non-Traditional Machining Technology of Ministry of Education, Dalian University of Technology, Dalian, China
Corresponding author: Zou, Helin (zouhl@dlut.edu.cn)
Source: Microsystem Technologies
Volume: 22; Issue: 5; Pages: 1105-1113; Issue date: May 1, 2016
Document type: Journal article (JA)
117. Accession number: 20163402720173
Title: Microstructure and performance optimisation of stainless steel formed by laser additive manufacturing
Authors: Li, J.1 ; Deng, D.1 ; Hou, X.1 ; Wang, X.2 ; Ma, G.3 ; Wu, D.3 ; Zhang, G.1
Author affiliation:
1- Key Laboratory for Materials Modi?cation by Laser, Ion and Electron Beams, Ministry of Education, School of Material Science and Engineering, Dalian University of Technology, Dalian; 116024, China
2- Institute of Sustainable Design and Manufacture, School of Mechanical Engineering, Dalian University of Technology, Dalian; 116024, China
3- Key Laboratory for Precision and Non-traditional Machining Technology of Ministry of Education, Dalian University of Technology, Dalian; 116024, China
Corresponding author: Zhang, G. (gfzhang@dlut.edu.cn)
Source: Materials Science and Technology (United Kingdom)
Volume: 32; Issue: 12; Pages: 1223-1230; Issue date: August 12, 2016
Document type: Journal article (JA)
118. Accession number: 20162902597315
Title: A novel strategy to eliminate the influence of water adsorption on quartz surfaces on piezoelectric dynamometers
Authors: Jia, Zhenyuan1 ; Jin, Lei1, 2 ; Liu, Wei1 ; Ren, Zongjin1
Author affiliation:
1- Key Laboratory for Precision and Non-traditional Machining Technology of the Ministry of Education, Dalian University of Technology, Dalian; 116024, China
2- Liaoning Provincial College of Communications, Shenyang; 110122, China
Corresponding author: Liu, Wei (lw_2007@dlut.edu.cn)
Source: Sensors (Switzerland)
Volume: 16; Issue: 7; Issue date: July 8, 2016
Document type: Journal article (JA)
119. Accession number: 20161402199739
Title: Micro-mechanical behavior and machining property for tripler plane of KDP crystal
Authors: Guo, Xiao-Guang1 ; Liu, Zi-Yuan1 ; Zheng, Gui-Lin1 ; Guo, Dong-Ming1
Author affiliation:
1- Key Laboratory for Precision & Non-traditional Machining of the Ministry of Education, Dalian University of Technology, Dalian, China
Corresponding author: Liu, Zi-Yuan (lzy5307827@126.com)
Source: Guangxue Jingmi Gongcheng/Optics and Precision Engineering
Volume: 24; Issue: 2; Pages: 398-405; Issue date: February 1, 2016
Document type: Journal article (JA)
120. Accession number: 20153401204782
Title: Experimental study on large size bearing ring raceways’ precision polishing with abrasive flowing machine (AFM) method
Authors: Wu, M.Y.1 ; Gao, H.1
Author affiliation:
1- Key Laboratory for Precision and Non-Traditional Machining Technology of Ministry of Education, Dalian University of Technology, Dalian, China
Corresponding author: Gao, H. (gaohang@dlut.edu.cn)
Source: International Journal of Advanced Manufacturing Technology
Volume: 83; Issue: 9-12; Pages: 1927-1935; Issue date: April 1, 2016
Document type: Journal article (JA)
121. Accession number: 20155101692125
Title: Tool path optimization for five-axis flank milling with cutter runout effect using the theory of envelope surface based on CL data for general tools
Authors: Guo, Qiang1 ; Sun, Yuwen2 ; Jiang, Yan3 ; Yan, Yanyan1 ; Zhao, Bo1 ; Ming, Pingmei1
Author affiliation:
1- School of Mechanical and Power Engineering, Henan Polytechnic University, Jiaozuo, China
2- Key Laboratory for Precision and Non-Traditional Machining Technology, Ministry of Education, Dalian University of Technology, Dalian, China
3- School of Survey and Land Information Engineering, Henan Polytechnic University, Jiaozuo, China
Corresponding author: Guo, Qiang (guoqiang@hpu.edu.cn)
Source: Journal of Manufacturing Systems
Volume: 38; Pages: 87-97; Issue date: 2016
Document type: Journal article (JA)
122. Accession number: 20162102418260
Title: Surface roughness prediction model of micro-milling Inconel 718 with consideration of tool wear
Authors: Lu, Xiaohong1 ; Jia, Zhenyuan1 ; Wang, Hua1 ; Si, Likun1 ; Wang, Xinxin1 ; Jia1
Author affiliation:
1- Key Laboratory for Precision and Non-traditional Machining Technology, Ministry of Education, Dalian University of Technology, Dalian; 116024, China
Corresponding author: Lu, Xiaohong (lxhdlut@dlut.edu.cn)
Source: International Journal of Nanomanufacturing
Volume: 12; Issue: 1; Pages: 93-108; Issue date: 2016
Document type: Journal article (JA)
123. Accession number: 20153601239177
Title: Effects of ultrasonic agitation on adhesion strength of micro electroforming Ni layer on Cu substrate
Authors: Zhao, Zhong1 ; Du, Liqun1, 2 ; Xu, Zheng2 ; Shao, Ligeng3
Author affiliation:
1- Key Laboratory for Precision and Non-traditional Machining Technology of Ministry of Education, Dalian University of Technology, Dalian, Taiwan
2- Key Laboratory for Micro/Nano Technology and System of Liaoning Province, Dalian University of Technology, Dalian, Taiwan
3- School of Electrical Engineering and Information, Dalian Jiaotong University, Dalian, Taiwan
Corresponding author: Du, Liqun
Source: Ultrasonics Sonochemistry
Volume: 29; Pages: 1-10; Issue date: March 3, 2016
Document type: Journal article (JA)
124. Accession number: 20160501871332
Title: Nickel-based alloy/austenitic stainless steel dissimilar weld properties prediction on asymmetric distribution of laser energy
Authors: Zhou, Siyu1 ; Ma, Guangyi1 ; Chai, Dongsheng1 ; Niu, Fangyong1 ; Dong, Jinfei1 ; Wu, Dongjiang1 ; Zou, Helin1
Author affiliation:
1- Key Laboratory for Precision and Non-traditional Machining Technology of Ministry of Education, Dalian University of Technology, Dalian; Liaoning Province, China
Corresponding author: Ma, Guangyi (gyma@dlut.edu.cn)
Source: Optics and Laser Technology
Volume: 81; Pages: 33-39; Issue date: July 2016
Document type: Journal article (JA)
125. Accession number: 20150700523774
Title: Fabrication of chamber for piezo inkjet printhead by SU-8 photolithography technology and bonding method
Authors: He, Jingzhi1 ; Yin, Zhifu1 ; Li, Chao1 ; Wang, Wenqiang1 ; Zou, Helin1, 2
Author affiliation:
1- Key Laboratory for Micro/Nano Technology and Systems of Liaoning Province, Dalian University of Technology, Dalian, China
2- Key Laboratory for Precision and Non-traditional Machining Technology of Ministry of Education, Dalian University of Technology, Dalian, China
Corresponding author: Zou, Helin (zouhl@dlut.edu.cn)
Source: Microsystem Technologies
Volume: 22; Issue: 4; Pages: 721-726; Issue date: April 1, 2016
Document type: Journal article (JA)
126. Accession number: 20165103135304
Title: Chatter prediction utilizing stability lobes with process damping in finish milling of titanium alloy thin-walled workpiece
Authors: Li, Zhongyun1 ; Sun, Yuwen1 ; Guo, Dongming1
Author affiliation:
1- Key Laboratory for Precision and Non-Traditional Machining Technology of the Ministry of Education, Dalian University of Technology, Dalian; 116024, China
Corresponding author: Sun, Yuwen (xiands@dult.edu.cn)
Source: International Journal of Advanced Manufacturing Technology; Pages: 1-12; Issue date: December 12, 2016
Document type: Article in Press
127. Accession number: 20164502997221
Title: A bionic MIS device for lumbar fracture reduction
Authors: Li, Jingmin1 ; Guo, Lihua1 ; Shi, Weiping1 ; Li, Tao1 ; Lei, Zhenkun2 ; Li, Weikang2 ; Li, Yuancheng3 ; Liu, Yuanchang4 ; Liu, Chong5
Author affiliation:
1- Key Laboratory for Micro/Nano Technology, Dalian University of Technology, Dalian, China
2- State Key Laboratory of Structural Analysis for Industrial Equipment, Dalian University of Technology, Dalian, China
3- Department of Orthopedics, First Affiliated Hospital, Dalian Medical University, Dalian, China
4- Department of Mechanical Engineering, University College London, London, United Kingdom
5- Key Laboratory for Micro/Nano Technology and System of Liaoning Province, Key Laboratory for Precision and Non-traditional Machining Technology, Ministry of Education, Dalian University of Technology, Dalian, China
Corresponding author: Li, Jingmin (jingminl@dlut.edu.cn)
Source: MESA 2016 - 12th IEEE/ASME International Conference on Mechatronic and Embedded Systems and Applications - Conference Proceedings; Issue date: October 7, 2016
Conference: 12th IEEE/ASME International Conference on Mechatronic and Embedded Systems and Applications, MESA 2016
Document type: Conference article (CA)
128. Accession number: 20164302933095
Title: A novel method for grinding wheel setting based on acoustic emissions
Authors: Zhu, Xiang Long1 ; Jiao, Zhen Hua1 ; Kang, Ren Ke1 ; Wang, Zi Guang1 ; Xu, Hui2
Author affiliation:
1- Key Laboratory for Precision and Non-traditional Machining of Ministry of Education, Dalian University of Technology, Dalian; 116024, China
2- School of Mechanical Engineering and Automation, University of Science and Technology Liaoning, Anshan; 114051, China
Corresponding author: Kang, Ren Ke (kangrk@dlut.edu.cn)
Source: Materials Science Forum
Volume: 874; Pages: 79-84; Issue date: 2016
Conference: 19th International Symposium on Advances in Abrasive Technology, ISAAT 2016
Document type: Conference article (CA)
129. Accession number: 20160201786883
Title: Numerical analysis on PET demolding stage in thermal nanoimprinting lithography
Authors: Yin, Zhifu1 ; Sun, Lei1 ; Zou, Helin1, 2
Author affiliation:
1- Key Laboratory for Micro/Nano Technology and Systems of Liaoning Province, Dalian University of Technology, Dalian, China
2- Key Laboratory for Precision and Non-traditional Machining Technology of Ministry of Education, Dalian University of Technology, Dalian, China
Corresponding author: Zou, Helin (zouhl@dlut.edu.cn)
Source: Microsystem Technologies; Pages: 1-7; Issue date: January 9, 2016
Document type: Article in Press
130. Accession number: 20160201784429
Title: The control system for precise five-axis laser/micro-milling machine tool
Authors: Jia, Zhenyuan1 ; Chen, Yuqin1 ; Liu, Wei1 ; Zhao, Kai1 ; Wang, Ling1 ; Tu, Xianming1
Author affiliation:
1- Key Laboratory for Precision and Non-traditional Machining Technology of Ministry of Education, Dalian University of Technology, Dalian, China
Corresponding author: Liu, Wei (lw2007@dlut.edu.cn)
Source: International Journal of Industrial and Systems Engineering
Volume: 22; Issue: 2; Pages: 145-160; Issue date: 2016
Document type: Journal article (JA)
131. Accession number: 20163002642372
Title: Bonding of 1D PMMA nanofluidic chip with low dimension loss and high bonding strength
Authors: Yin, Zhifu1 ; Sun, Lei1 ; Zou, Helin1, 2 ; Xu, Shenbo1
Author affiliation:
1- Key Laboratory for Micro/Nano Technology and Systems of Liaoning Province, Dalian University of Technology, Dalian; 116024, China
2- Key Laboratory for Precision and Non-Traditional Machining Technology of Ministry of Education, Dalian University of Technology, Dalian; 116024, China
Corresponding author: Zou, Helin
Source: Journal of Nanoscience and Nanotechnology
Volume: 16; Issue: 8; Pages: 8439-8444; Issue date: August 2016
Document type: Journal article (JA)
132. Accession number: 20162302475628
Title: Simulative technology for auxiliary fuel tank separation in a wind tunnel
Authors: Ma, Xin1 ; Liu, Wei1 ; Chen, Ling1 ; Li, Xiao1 ; Jia, Zhenyuan1 ; Shang, Zhiliang1
Author affiliation:
1- Key Laboratory for Precision and Non-traditional Machining Technology, Ministry of Education, Dalian University of Technology, Dalian; 116024, China
Corresponding author: Liu, Wei (lw2007@dlut.edu.cn)
Source: Chinese Journal of Aeronautics
Volume: 29; Issue: 3; Pages: 608-616; Issue date: June 1, 2016
Document type: Journal article (JA)
133. Accession number: 20162102422481
Title: The integrated design of ultrasonic horn and cupped tool
Authors: Ma, Fu-Jian1 ; Dong, Zhi-Gang2 ; Kang, Ren-Ke2 ; Zhang, Sheng-Fang1 ; Sha, Zhi-Hua1
Author affiliation:
1- School of Mechanical Engineering, Dalian Jiaotong University, Dalian; 116028, China
2- Key Laboratory for Precision & Non-traditional Machining of Ministry of Education, Dalian University of Technology, Dalian; 116024, China
Corresponding author: Kang, Ren-Ke (kangrk@dlut.edu.cn)
Source: Zhendong Gongcheng Xuebao/Journal of Vibration Engineering
Volume: 29; Issue: 2; Pages: 231-236; Issue date: April 1, 2016
Document type: Journal article (JA)
134. Accession number: 20161002077881
Title: Localized and precision removal of metal coating on engineering plastics using NC laser milling
Authors: Jia, Zhen-Yuan1 ; Zhao, Kai1 ; Liu, Wei1 ; Ding, Li-Chao1
Author affiliation:
1- Key Laboratory for Precision and Non-traditional Machining Technology of the Ministry of Education, Dalian University of Technology, Dalian, China
Corresponding author: Jia, Zhen-Yuan (jzyxy@dlut.edu.cn)
Source: Guangxue Jingmi Gongcheng/Optics and Precision Engineering
Volume: 24; Issue: 1; Pages: 94-101; Issue date: January 1, 2016
Document type: Journal article (JA)
135. Accession number: 20152901044608
Title: 3D stability lobe considering the helix angle effect in thin-wall milling
Authors: Jin, Xin1 ; Sun, Yuwen1 ; Guo, Qiang2 ; Guo, Dongming1
Author affiliation:
1- Key Laboratory for Precision and Non-Traditional Machining Technology of the Ministry of Education, Dalian University of Technology, Dalian, China
2- School of Mechanical and Power Engineering, Henan Polytechnic University, Jiaozuo, China
Corresponding author: Sun, Yuwen (xiands@dlut.edu.cn)
Source: International Journal of Advanced Manufacturing Technology
Volume: 82; Issue: 9-12; Pages: 2123-2136; Issue date: February 1, 2016
Document type: Journal article (JA)
136. Accession number: 20160902034394
Title: Design and evaluation of a remote measurement system for the online monitoring of rail vibration signals
Authors: Chong, Liu1, 2 ; Jiahong, Wei2 ; Zhixin, Zhang3 ; Junsheng, Liang1, 2 ; Tongqun, Ren2 ; Hongquan, Xu4
Author affiliation:
1- Key Laboratory for Micro, Nano Technology and System of Liaoning Province, Dalian University of Technology, China
2- Key Laboratory for Precision and Non-traditional Machining Technology, Ministry of Education, Dalian University of Technology, China
3- School of Mechanical Engineering, Dalian University, Dalian, China
4- Zhongxing Telecom Equipment Corporation, Chengdu, China
Corresponding author: Zhixin, Zhang (dllzzx@dl.cn)
Source: Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit
Volume: 230; Issue: 3; Pages: 724-733; Issue date: March 1, 2016
Document type: Journal article (JA)
137. Accession number: 20161502227346
Title: Experimental study on magnetorheological chemical polishing for sapphire substrate
Authors: Yin, Shaohui1 ; Wang, Yongqiang1 ; Li, Yepeng1 ; Kang, Renke2 ; Chen, Fengjun1 ; Hu, Tian3
Author affiliation:
1- National Engineering Research Center for High Efficiency Grinding, Hunan University, Changsha, China
2- Key Laboratory for Precision and Non-Traditional Machining Technology of Ministry of Education, Dalian University of Technology, Dalian, China
3- Changsha Nano-Meter Ultra-Precision Manufacturing Technology Co., Ltd., Changsha, China
Corresponding author: Wang, Yongqiang (rancher_wong@126.com)
Source: Jixie Gongcheng Xuebao/Journal of Mechanical Engineering
Volume: 52; Issue: 5; Pages: 80-87; Issue date: March 5, 2016
Document type: Journal article (JA)
Conference Proceedings Citation Index- Science (CPCI-S) 收录14 篇
1. Accession Number: WOS:000374570300019
Title: Optimization of the profile of the nano-mold and the imprinting conditions by numerical simulation method
Author(s): Yin, ZF (Yin, Zhifu); Sun, L (Sun, Lei); Zou, HL (Zou, Helin); Xu, SB (Xu, Shenbo)
Source: MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS, Volume: 22; Issue: 5; Pages: 1105-1113; Published: MAY 2016
Document Type: Article; Proceedings Paper
Addresses: [Yin, Zhifu; Sun, Lei; Zou, Helin; Xu, Shenbo] Dalian Univ Technol, Key Lab Micro Nano Technol & Syst Liaoning Prov, Dalian 116024, Peoples R China.
[Zou, Helin] Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116024, Peoples R China.
Reprint Address: Zou, HL (reprint author), Dalian Univ Technol, Key Lab Micro Nano Technol & Syst Liaoning Prov, Dalian 116024, Peoples R China.
E-mail Addresses: zouhl@dlut.edu.cn
ISSN: 0946-7076
Times Cited in Web of Science Core Collection: 0
2. Accession Number: WOS:000390841000090
Title: Research on Orthogonal Turn-milling Machining of Micro Shafts
Author(s): Shi, L (Shi, Liang); Huang, S (Huang, Shuai); Liu, JY (Liu, Jiyu); Sun, J (Sun, Jing); Zhu, MQ (Zhu, Mengqi); Xu, WJ (Xu, Wenji); Liu, X (Liu, Xin)
Source: 2016 INTERNATIONAL CONFERENCE ON MATERIAL, ENERGY AND ENVIRONMENT ENGINEERING (ICM3E 2016); Pages: 516-520; Published: 2016
Document Type: Proceedings Paper
Addresses: [Shi, Liang] Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116024, Peoples R China.
ISBN: 978-1-60595-321-2
Record 3 of 14
Reprint Address: Shi, L (reprint author), Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116024, Peoples R China.
Times Cited in Web of Science Core Collection: 0
3. Accession Number: WOS:000390697400127
Title: A monocular vision 3D measurement method based on refraction of light
Author(s): Liu, W (Liu, Wei); Ma, X (Ma, Xin); Chen, L (Chen, Ling); Yang, JH (Yang, Jinghao); Jia, ZY (Jia, Zhenyuan)
Source: PROCEEDINGS 2016 IEEE 25TH INTERNATIONAL SYMPOSIUM ON INDUSTRIAL ELECTRONICS (ISIE) Book Series: Proceedings of the IEEE International Symposium on Industrial Electronics; Pages: 880-884; Published: 2016
Document Type: Proceedings Paper
Addresses: [Liu, Wei; Ma, Xin; Chen, Ling; Yang, Jinghao; Jia, Zhenyuan] Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian, Peoples R China.
Reprint Address: Liu, W (reprint author), Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian, Peoples R China.
E-mail Addresses: lw2007@dlut.edu.cn; maxin2000@mail.dlut.edu.cn; 200961803@mail.dlut.edu.cn; eeyen@mail.dlut.edu.cn; Jzyxy@dlut.edu.cn
ISSN: 2163-5137
Times Cited in Web of Science Core Collection: 0
4. Accession Number: WOS:000390697400129
Title: An Improved Measurement Method of Large Hot Forgings Based on Laser-aided Multi-view Stereo Vision
Author(s): Liu, Y (Liu, Yang); Liu, W (Liu, Wei); Wang, LL (Wang, Lingli); Xu, PT (Xu, Pengtao); Fan, CN (Fan, Chaonan); Ding, LC (Ding, Lichao); Jia, ZY (Jia, Zhenyuan)
Source: PROCEEDINGS 2016 IEEE 25TH INTERNATIONAL SYMPOSIUM ON INDUSTRIAL ELECTRONICS (ISIE) Book Series: Proceedings of the IEEE International Symposium on Industrial Electronics; Pages: 890-894; Published: 2016
Document Type: Proceedings Paper
Addresses: [Liu, Yang; Liu, Wei; Wang, Lingli; Xu, Pengtao; Fan, Chaonan; Ding, Lichao; Jia, Zhenyuan] Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian, Peoples R China.
Reprint Address: Liu, W (reprint author), Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian, Peoples R China.
E-mail Addresses: lw2007@dlut.edu.cn
ISSN: 2163-5137
Times Cited in Web of Science Core Collection: 0
5. Accession Number: WOS:000390697400133
Title: Improved calibration method of binocular vision measurement system for large hot forging
Author(s): Yang, JH (Yang, Jinghao); Liu, W (Liu, Wei); Fan, CN (Fan, Chaonan); Li, SJ (Li, Shijie); Wang, FJ (Wang, Fuji); Jia, ZY (Jia, Zhenyuan); Yan, HY (Yan, Hongyue); Li, X (Li, Xiao)
Source: PROCEEDINGS 2016 IEEE 25TH INTERNATIONAL SYMPOSIUM ON INDUSTRIAL ELECTRONICS (ISIE) Book Series: Proceedings of the IEEE International Symposium on Industrial Electronics; Pages: 918-922; Published: 2016
Document Type: Proceedings Paper
Addresses: [Yang, Jinghao; Liu, Wei; Fan, Chaonan; Li, Shijie; Wang, Fuji; Jia, Zhenyuan; Yan, Hongyue; Li, Xiao] Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian, Peoples R China.
Reprint Address: Liu, W (reprint author), Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian, Peoples R China.
E-mail Addresses: lw2007@dlut.edu.cn
ISSN: 2163-5137
Times Cited in Web of Science Core Collection: 0
6. Accession Number: WOS:000387592400078
Title: A Novel Method for Additive/Subtractive Hybrid Manufacturing of Metallic Parts
Author(s): Du, W (Du, Wei); Bai, Q (Bai, Qian); Zhang, B (Zhang, Bi)
Source: 44TH NORTH AMERICAN MANUFACTURING RESEARCH CONFERENCE, NAMRC 44 Book Series: Procedia Manufacturing, Volume: 5; Pages: 1018-1030; Published: 2016
Document Type: Proceedings Paper
Addresses: [Du, Wei; Bai, Qian; Zhang, Bi] Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian, Peoples R China.
[Zhang, Bi] Univ Connecticut, Dept Mech Engn, Storrs, CT USA.
Reprint Address: Du, W (reprint author), Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian, Peoples R China.
E-mail Addresses: duwei_8848@mail.dlut.edu.cn; baiqian@dlut.edu.cn; zhang@engr.uconn.edu
ISSN: 2351-9789
Times Cited in Web of Science Core Collection: 0
7. Accession Number: WOS:000387154700009
Title: A Bionic MIS Device for Lumbar Fracture Reduction
Author(s): Li, JM (Li, Jingmin); Guo, LH (Guo, Lihua); Shi, WP (Shi, Weiping); Li, T (Li, Tao); Lei, ZK (Lei, Zhenkun); Li, WK (Li, Weikang); Li, YC (Li, Yuanchcng); Liu, YC (Liu, Yuanchang); Liu, C (Liu, Chong)
Source: 2016 12TH IEEE/ASME INTERNATIONAL CONFERENCE ON MECHATRONIC AND EMBEDDED SYSTEMS AND APPLICATIONS (MESA); Published: 2016
Document Type: Proceedings Paper
Addresses: [Li, Jingmin; Guo, Lihua; Shi, Weiping; Li, Tao] Dalian Univ Technol, Key Lab Micro Nano Technol, Dalian, Peoples R China.
[Lei, Zhenkun; Li, Weikang] Dalian Univ Technol, State Key Lab Struct Anal Ind Equipment, Dalian, Peoples R China.
[Li, Yuanchcng] Dalian Med Univ, Dept Orthoped, Affiliated Hosp 1, Dalian, Peoples R China.
[Liu, Yuanchang] UCL, Dept Mech Engn, London, England.
[Liu, Chong] Dalian Univ Technol, Key Lab Micro Nano Technol & Syst Liaoning Prov, Key Lab Precis & Nontradit Machining Technol, Minist Educ, Dalian, Peoples R China.
Reprint Address: Li, JM (reprint author), Dalian Univ Technol, Key Lab Micro Nano Technol, Dalian, Peoples R China.
E-mail Addresses: jingminl@dlut.edu.cn
Times Cited in Web of Science Core Collection: 0
8. Accession Number: WOS:000382523600094
Title: A Photogrammetry Pose Measurement Method for Moving Targets in a Wind Tunnel
Author(s): Ma, X (Ma, Xin); Liu, W (Liu, Wei); Chen, L (Chen, Ling); Lu, JW (Lu, Jiwen); Liu, WX (Liu, Weixiao); Zhang, JK (Zhang, Jiakun); Jia, ZY (Jia, Zhenyuan); Long, CY (Long Changyu); Yang, ZH (Yang Zaihua); Yi, WM (Yi Wangmin)
Source: 2016 IEEE INTERNATIONAL INSTRUMENTATION AND MEASUREMENT TECHNOLOGY CONFERENCE PROCEEDINGS; Pages: 529-533; Published: 2016
Document Type: Proceedings Paper
Addresses: [Ma, Xin; Liu, Wei; Chen, Ling; Lu, Jiwen; Liu, Weixiao; Zhang, Jiakun; Jia, Zhenyuan; Long Changyu; Yang Zaihua; Yi Wangmin] Dalian Univ Technol, Key Lab Precis & Nontradit Machining Technol, Minist Educ, Dalian, Peoples R China.
Reprint Address: Ma, X (reprint author), Dalian Univ Technol, Key Lab Precis & Nontradit Machining Technol, Minist Educ, Dalian, Peoples R China.
E-mail Addresses: maxin2000@mail.dlut.edu.cn
Times Cited in Web of Science Core Collection: 0
9. Accession Number: WOS:000379703000063
Title: AN ENERGY-BASED RESIDUAL STRESS FIELD RECONSTRUCTION APPROACH USING LIMITED MEASUREMENTS
Author(s): Liu, HB (Liu, H-B.); Li, YP (Li, Y-P.); Wang, YQ (Wang, Y-Q.); Sheng, XJ (Sheng, X-J.)
Source: PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2015, VOL 2B; Article Number: V02BT02A063; Published: 2016
Document Type: Proceedings Paper
Addresses: [Liu, H-B.; Li, Y-P.; Wang, Y-Q.; Sheng, X-J.] Dalian Univ Technol, Key Lab Precis & Nontradit Machining Technol, Minist Educ, Dalian, Liaoning, Peoples R China.
Reprint Address: Liu, HB (reprint author), Dalian Univ Technol, Key Lab Precis & Nontradit Machining Technol, Minist Educ, Dalian, Liaoning, Peoples R China.
E-mail Addresses: hbliu@dlut.edu.cn; yapengleedlut@l63.com; yqwang@dlut.edu.cn; sxianjun@dlut.edu.cn
Times Cited in Web of Science Core Collection: 0
10. Accession Number: WOS:000379246600017
Title: Rapid Fabrication of Eutectic Ceramic Structures by Laser Engineered Net Shaping
Author(s): Niu, FY (Niu, Fangyong); Wu, DJ (Wu, Dongjiang); Ma, GY (Ma, Guangyi); Wang, JT (Wang, Jiangtian); Zhuang, J (Zhuang, Juan); Jin, ZJ (Jin, Zhuji)
Source: 18TH CIRP CONFERENCE ON ELECTRO PHYSICAL AND CHEMICAL MACHINING (ISEM XVIII) Book Series: Procedia CIRP, Volume: 42; Pages: 91-95; Published: 2016
Document Type: Proceedings Paper
Addresses: [Niu, Fangyong; Wu, Dongjiang; Ma, Guangyi; Wang, Jiangtian; Jin, Zhuji] Dalian Univ Technol, Key Lab Precis & Nontradit Machining Technol, Minist Educ, Dalian 116024, Liaoning Provin, Peoples R China.
[Zhuang, Juan] Dalian Univ Technol, Sch Phys & Optoelect Engn, Dalian 116024, Liaoning Provin, Peoples R China.
Reprint Address: Wu, DJ (reprint author), Dalian Univ Technol, Key Lab Precis & Nontradit Machining Technol, Minist Educ, Dalian 116024, Liaoning Provin, Peoples R China.
E-mail Addresses: djwu@dlut.edu.cn
ISSN: 2212-8271
Times Cited in Web of Science Core Collection: 0
11. Accession Number: WOS:000379246600076
Title: Study of micro groove machining by micro ECM
Author(s): Chen, CC (Chen, Chuangchuang); Li, JZ (Li, Jianzhong); Zhan, SC (Zhan, Shicheng); Yu, ZY (Yu, Zuyuan); Xu, WJ (Xu, Wenji)
Source: 18TH CIRP CONFERENCE ON ELECTRO PHYSICAL AND CHEMICAL MACHINING (ISEM XVIII) Book Series: Procedia CIRP, Volume: 42; Pages: 418-422; Published: 2016
Document Type: Proceedings Paper
Addresses: [Chen, Chuangchuang; Li, Jianzhong; Zhan, Shicheng; Yu, Zuyuan; Xu, Wenji] Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian, Peoples R China.
Reprint Address: Yu, ZY (reprint author), Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian, Peoples R China.
E-mail Addresses: zyu@dlut.edu.cn
ISSN: 2212-8271
Times Cited in Web of Science Core Collection: 0
12. Accession Number: WOS:000379246600154
Title: Material Removal Modes of Quartz Crystals by Micro USM
Author(s): Li, GD (Li, Guodong); Yu, ZY (Yu, Zuyuan); Song, JW (Song, Jiawen); Li, C (Li, Can); Li, JZ (Li, Jianzhong); Natsu, W (Natsu, Wataru)
Source: 18TH CIRP CONFERENCE ON ELECTRO PHYSICAL AND CHEMICAL MACHINING (ISEM XVIII) Book Series: Procedia CIRP, Volume: 42; Pages: 842-846; Published: 2016
Document Type: Proceedings Paper
Addresses: [Li, Guodong; Yu, Zuyuan; Song, Jiawen; Li, Can; Li, Jianzhong] Dalian Univ Technol, Key Lab Precis & Nontradit Machining Technol, Minist Educ, Dalian, Peoples R China.
[Natsu, Wataru] Tokyo Univ Agr & Technol, Dept Mech Syst Engn, Tokyo, Japan.
Reprint Address: Yu, ZY (reprint author), Dalian Univ Technol, Key Lab Precis & Nontradit Machining Technol, Minist Educ, Dalian, Peoples R China.
E-mail Addresses: zyu@dlut.edu.cn
ISSN: 2212-8271
Times Cited in Web of Science Core Collection: 0
13. Accession Number: WOS:000369988400061
Title: Precise Positioning Method for Multi-process Connecting Based on Binocular Vision
Author(s): Liu, W (Liu, Wei); Ding, LC (Ding, Lichao); Zhao, K (Zhao, Kai); Li, X (Li, Xiao); Wang, L (Wang, Ling); Jia, ZY (Jia, Zhenyuan)
Source: SEVENTH INTERNATIONAL SYMPOSIUM ON PRECISION MECHANICAL MEASUREMENTS Book Series: Proceedings of SPIE, Volume: 9903; Article Number: 99031P; Published: 2016
Document Type: Proceedings Paper
Addresses: [Liu, Wei; Ding, Lichao; Zhao, Kai; Li, Xiao; Wang, Ling; Jia, Zhenyuan] Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Sch Mech Engn, Dalian, Peoples R China.
Reprint Address: Liu, W (reprint author), Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Sch Mech Engn, Dalian, Peoples R China.
E-mail Addresses: lw2007@dlut.edu.cn
ISSN: 0277-786X
Times Cited in Web of Science Core Collection: 0
14. Accession Number: WOS:000367812600018
Title: Numerical study on the de-molding behavior of 2D PMMA nanochannles during hot embossing process
Author(s): Yin, ZF (Yin, Zhifu); Sun, L (Sun, Lei); Cheng, E (Cheng, E.); Zou, HL (Zou, Helin)
Source: MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS, Volume: 22; Issue: 1; Special Issue: SI; Pages: 129-135; Published: JAN 2016
Document Type: Article; Proceedings Paper
Addresses: [Yin, Zhifu; Sun, Lei; Cheng, E.; Zou, Helin] Dalian Univ Technol, Key Lab Micro Nano Technol & Syst Liaoning Prov, Dalian 116024, Peoples R China.
[Zou, Helin] Dalian Univ Technol, Key Lab Precis & Nontradit Machining Technol, Minist Educ, Dalian 116024, Peoples R China.
Reprint Address: Zou, HL (reprint author), Dalian Univ Technol, Key Lab Micro Nano Technol & Syst Liaoning Prov, Dalian 116024, Peoples R China.
E-mail Addresses: zouhl@dlut.edu.cn
ISSN: 0946-7076
Times Cited in Web of Science Core Collection: 0
特此证明
大连理工大学图书馆
教育部科技查新工作站 (L05)
2017年4月25日
